Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy...

[pandora-kernel.git] / drivers / ide / Kconfig

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index d1266fe..e23bc0d 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -4,6 +4,8 @@
 # Andre Hedrick <andre@linux-ide.org>
 #
 
+if BLOCK
+
 menu "ATA/ATAPI/MFM/RLL support"
 
 config IDE
@@ -54,7 +56,7 @@ if IDE
 
 config IDE_MAX_HWIFS
        int "Max IDE interfaces"
-       depends on ALPHA || SUPERH || IA64
+       depends on ALPHA || SUPERH || IA64 || EMBEDDED
        default 4
        help
          This is the maximum number of IDE hardware interfaces that will
@@ -387,14 +389,6 @@ config BLK_DEV_RZ1000
          Linux. This may slow disk throughput by a few percent, but at least
          things will operate 100% reliably.
 
-config BLK_DEV_SL82C105
-       tristate "Winbond SL82c105 support"
-       depends on PCI && (PPC || ARM) && BLK_DEV_IDEPCI
-       help
-         If you have a Winbond SL82c105 IDE controller, say Y here to enable
-         special configuration for this chip. This is common on various CHRP
-         motherboards, but could be used elsewhere. If in doubt, say Y.
-
 config BLK_DEV_IDEDMA_PCI
        bool "Generic PCI bus-master DMA support"
        depends on PCI && BLK_DEV_IDEPCI
@@ -592,6 +586,12 @@ config BLK_DEV_HPT366
          ide-probe at boot. It is reported to support DVD II drives, by the
          manufacturer.
 
+config BLK_DEV_JMICRON
+       tristate "JMicron JMB36x support"
+       help
+         Basic support for the JMicron ATA controllers. For full support
+         use the libata drivers.
+
 config BLK_DEV_SC1200
        tristate "National SCx200 chipset support"
        help
@@ -606,15 +606,6 @@ config BLK_DEV_PIIX
          the kernel to change PIO, DMA and UDMA speeds and to configure
          the chip to optimum performance.
 
-config BLK_DEV_IT8172
-       bool "IT8172 IDE support"
-       depends on (MIPS_ITE8172 || MIPS_IVR)
-       help
-         Say Y here to support the on-board IDE controller on the Integrated
-         Technology Express, Inc. ITE8172 SBC.  Vendor page at
-         <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-         board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-
 config BLK_DEV_IT821X
        tristate "IT821X IDE support"
        help
@@ -682,6 +673,7 @@ config BLK_DEV_SVWKS
 config BLK_DEV_SGIIOC4
        tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
        depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
+       select IDEPCI_SHARE_IRQ
        help
          This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
          chipset, which has one channel and can support two devices.
@@ -712,6 +704,14 @@ config BLK_DEV_SIS5513
 
          Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
 
+config BLK_DEV_SL82C105
+       tristate "Winbond SL82c105 support"
+       depends on (PPC || ARM)
+       help
+         If you have a Winbond SL82c105 IDE controller, say Y here to enable
+         special configuration for this chip. This is common on various CHRP
+         motherboards, but could be used elsewhere. If in doubt, say Y.
+
 config BLK_DEV_SLC90E66
        tristate "SLC90E66 chipset support"
        help
@@ -773,20 +773,6 @@ config BLK_DEV_IDEDMA_PMAC
          to transfer data to and from memory.  Saying Y is safe and improves
          performance.
 
-config BLK_DEV_IDE_PMAC_BLINK
-       bool "Blink laptop LED on drive activity (DEPRECATED)"
-       depends on BLK_DEV_IDE_PMAC && ADB_PMU
-       select ADB_PMU_LED
-       select LEDS_TRIGGERS
-       select LEDS_TRIGGER_IDE_DISK
-       help
-         This option enables the use of the sleep LED as a hard drive
-         activity LED.
-         This option is deprecated, it only selects ADB_PMU_LED and
-         LEDS_TRIGGER_IDE_DISK and changes the code in the new led class
-         device to default to the ide-disk trigger (which should be set
-         from userspace via sysfs).
-
 config BLK_DEV_IDE_SWARM
        tristate "IDE for Sibyte evaluation boards"
        depends on SIBYTE_SB1xxx_SOC
@@ -1095,3 +1081,5 @@ config BLK_DEV_HD
 endif
 
 endmenu
+
+endif