[POWERPC] Convert powermac ide blink to new led infrastructure

[pandora-kernel.git] / drivers / ide / Kconfig

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 31e649a..d1266fe 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -52,9 +52,9 @@ config IDE
 
 if IDE
 
-config IDE_MAX_HWIFS 
+config IDE_MAX_HWIFS
        int "Max IDE interfaces"
-       depends on ALPHA || SUPERH
+       depends on ALPHA || SUPERH || IA64
        default 4
        help
          This is the maximum number of IDE hardware interfaces that will
@@ -162,8 +162,8 @@ config BLK_DEV_IDECS
        tristate "PCMCIA IDE support"
        depends on PCMCIA
        help
-         Support for outboard IDE disks, tape drives, and CD-ROM drives
-         connected through a  PCMCIA card.
+         Support for Compact Flash cards, outboard IDE disks, tape drives,
+         and CD-ROM drives connected through a PCMCIA card.
 
 config BLK_DEV_IDECD
        tristate "Include IDE/ATAPI CDROM support"
@@ -267,7 +267,7 @@ config IDE_TASK_IOCTL
        help
          This is a direct raw access to the media.  It is a complex but
          elegant solution to test and validate the domain of the hardware and
-         perform below the driver data recover if needed.  This is the most
+         perform below the driver data recovery if needed.  This is the most
          basic form of media-forensics.
 
          If you are unsure, say N here.
@@ -525,7 +525,7 @@ config BLK_DEV_CS5520
        tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
        depends on EXPERIMENTAL
        help
-         Include support for PIO tuning an virtual DMA on the Cyrix MediaGX 
+         Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
          5510/5520 chipset. This will automatically be detected and
          configured if found.
 
@@ -662,7 +662,7 @@ config PDC202XX_BURST
 
          It was originally designed for the PDC20246/Ultra33, whose BIOS will
          only setup UDMA on the first two PDC20246 cards.  It has also been
-         used succesfully on a PDC20265/Ultra100, allowing use of UDMA modes
+         used successfully on a PDC20265/Ultra100, allowing use of UDMA modes
          when the PDC20265 BIOS has been disabled (for faster boot up).
 
          Please read the comments at the top of
@@ -673,13 +673,6 @@ config PDC202XX_BURST
 config BLK_DEV_PDC202XX_NEW
        tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
 
-# FIXME - probably wants to be one for old and for new
-config PDC202XX_FORCE
-       bool "Enable controller even if disabled by BIOS"
-       depends on BLK_DEV_PDC202XX_NEW
-       help
-         Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
-
 config BLK_DEV_SVWKS
        tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
        help
@@ -722,7 +715,7 @@ config BLK_DEV_SIS5513
 config BLK_DEV_SLC90E66
        tristate "SLC90E66 chipset support"
        help
-         This driver ensures (U)DMA support for Victroy66 SouthBridges for
+         This driver ensures (U)DMA support for Victory66 SouthBridges for
          SMsC with Intel NorthBridges.  This is an Ultra66 based chipset.
          The nice thing about it is that you can mix Ultra/DMA/PIO devices
          and it will handle timing cycles.  Since this is an improved
@@ -781,11 +774,18 @@ config BLK_DEV_IDEDMA_PMAC
          performance.
 
 config BLK_DEV_IDE_PMAC_BLINK
-       bool "Blink laptop LED on drive activity"
+       bool "Blink laptop LED on drive activity (DEPRECATED)"
        depends on BLK_DEV_IDE_PMAC && ADB_PMU
+       select ADB_PMU_LED
+       select LEDS_TRIGGERS
+       select LEDS_TRIGGER_IDE_DISK
        help
          This option enables the use of the sleep LED as a hard drive
          activity LED.
+         This option is deprecated, it only selects ADB_PMU_LED and
+         LEDS_TRIGGER_IDE_DISK and changes the code in the new led class
+         device to default to the ide-disk trigger (which should be set
+         from userspace via sysfs).
 
 config BLK_DEV_IDE_SWARM
        tristate "IDE for Sibyte evaluation boards"
@@ -807,14 +807,6 @@ config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
 endchoice
 
-config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
-        bool "Enable burstable Mode on DbDMA"
-        default false
-        depends BLK_DEV_IDE_AU1XXX
-        help
-          This option enable the burstable Flag on DbDMA controller
-          (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY").
-
 config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
        int "Maximum transfer size (KB) per request (up to 128)"
        default "128"
@@ -940,7 +932,7 @@ config BLK_DEV_Q40IDE
 
 config BLK_DEV_MPC8xx_IDE
        bool "MPC8xx IDE support"
-       depends on 8xx
+       depends on 8xx && IDE=y && BLK_DEV_IDE=y
        help
          This option provides support for IDE on Motorola MPC8xx Systems.
          Please see 'Type of MPC8xx IDE interface' for details.
@@ -1068,7 +1060,7 @@ config IDEDMA_IVB
          in that mode with an 80c ribbon.
 
          If you are experiencing compatibility or performance problems, you
-         MAY try to answering Y here. However, it does not necessarily solve
+         MAY try to answer Y here. However, it does not necessarily solve
          any of your problems, it could even cause more of them.
 
          It is normally safe to answer Y; however, the default is N.