+
/*
* Copyright (C) 2004 Texas Instruments, Inc.
*
#include <linux/delay.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
+#include <linux/i2c/menelaus.h>
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
+#include <mach/gpio.h>
#define DRIVER_NAME "menelaus"
-#define MENELAUS_I2C_ADDRESS 0x72
-
-#define MENELAUS_REV 0x01
-#define MENELAUS_VCORE_CTRL1 0x02
-#define MENELAUS_VCORE_CTRL2 0x03
-#define MENELAUS_VCORE_CTRL3 0x04
-#define MENELAUS_VCORE_CTRL4 0x05
-#define MENELAUS_VCORE_CTRL5 0x06
-#define MENELAUS_DCDC_CTRL1 0x07
-#define MENELAUS_DCDC_CTRL2 0x08
-#define MENELAUS_DCDC_CTRL3 0x09
-#define MENELAUS_LDO_CTRL1 0x0A
-#define MENELAUS_LDO_CTRL2 0x0B
-#define MENELAUS_LDO_CTRL3 0x0C
-#define MENELAUS_LDO_CTRL4 0x0D
-#define MENELAUS_LDO_CTRL5 0x0E
-#define MENELAUS_LDO_CTRL6 0x0F
-#define MENELAUS_LDO_CTRL7 0x10
-#define MENELAUS_LDO_CTRL8 0x11
-#define MENELAUS_SLEEP_CTRL1 0x12
-#define MENELAUS_SLEEP_CTRL2 0x13
-#define MENELAUS_DEVICE_OFF 0x14
-#define MENELAUS_OSC_CTRL 0x15
-#define MENELAUS_DETECT_CTRL 0x16
-#define MENELAUS_INT_MASK1 0x17
-#define MENELAUS_INT_MASK2 0x18
-#define MENELAUS_INT_STATUS1 0x19
-#define MENELAUS_INT_STATUS2 0x1A
-#define MENELAUS_INT_ACK1 0x1B
-#define MENELAUS_INT_ACK2 0x1C
-#define MENELAUS_GPIO_CTRL 0x1D
-#define MENELAUS_GPIO_IN 0x1E
-#define MENELAUS_GPIO_OUT 0x1F
-#define MENELAUS_BBSMS 0x20
-#define MENELAUS_RTC_CTRL 0x21
-#define MENELAUS_RTC_UPDATE 0x22
-#define MENELAUS_RTC_SEC 0x23
-#define MENELAUS_RTC_MIN 0x24
-#define MENELAUS_RTC_HR 0x25
-#define MENELAUS_RTC_DAY 0x26
-#define MENELAUS_RTC_MON 0x27
-#define MENELAUS_RTC_YR 0x28
-#define MENELAUS_RTC_WKDAY 0x29
-#define MENELAUS_RTC_AL_SEC 0x2A
-#define MENELAUS_RTC_AL_MIN 0x2B
-#define MENELAUS_RTC_AL_HR 0x2C
-#define MENELAUS_RTC_AL_DAY 0x2D
-#define MENELAUS_RTC_AL_MON 0x2E
-#define MENELAUS_RTC_AL_YR 0x2F
-#define MENELAUS_RTC_COMP_MSB 0x30
-#define MENELAUS_RTC_COMP_LSB 0x31
-#define MENELAUS_S1_PULL_EN 0x32
-#define MENELAUS_S1_PULL_DIR 0x33
-#define MENELAUS_S2_PULL_EN 0x34
-#define MENELAUS_S2_PULL_DIR 0x35
-#define MENELAUS_MCT_CTRL1 0x36
-#define MENELAUS_MCT_CTRL2 0x37
-#define MENELAUS_MCT_CTRL3 0x38
-#define MENELAUS_MCT_PIN_ST 0x39
-#define MENELAUS_DEBOUNCE1 0x3A
-
-#define IH_MENELAUS_IRQS 12
-#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */
-#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */
-#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */
-#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */
-#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */
-#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */
-#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */
-#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */
-#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */
-#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */
-#define MENELAUS_RTCERR_IRQ 10 /* RTC error */
-#define MENELAUS_PSHBTN_IRQ 11 /* Push button */
-#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */
-#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */
-#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
-#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
static void menelaus_work(struct work_struct *_menelaus);
int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
if (val < 0) {
- pr_err(DRIVER_NAME ": write error");
+ dev_err(&the_menelaus->client->dev, "write error");
return val;
}
int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
if (val < 0)
- pr_err(DRIVER_NAME ": read error");
+ dev_err(&the_menelaus->client->dev, "read error");
return val;
}
return;
if (!(reg & 0x1))
- card_mask |= (1 << 0);
+ card_mask |= MCT_PIN_ST_S1_CD_ST;
if (!(reg & 0x2))
- card_mask |= (1 << 1);
+ card_mask |= MCT_PIN_ST_S2_CD_ST;
if (menelaus_hw->mmc_callback)
menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
val = ret;
if (slot == 1) {
if (enable)
- val |= 1 << 2;
+ val |= MCT_CTRL1_S1_CMD_OD;
else
- val &= ~(1 << 2);
+ val &= ~MCT_CTRL1_S1_CMD_OD;
} else {
if (enable)
- val |= 1 << 3;
+ val |= MCT_CTRL1_S2_CMD_OD;
else
- val &= ~(1 << 3);
+ val &= ~MCT_CTRL1_S2_CMD_OD;
}
ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
mutex_unlock(&the_menelaus->lock);
ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
if (ret < 0)
goto out;
- ret |= 0x02;
+ ret |= GPIO2_DIR_INPUT;
if (enable)
- ret |= 1 << 5;
+ ret |= GPIO_CTRL_SLOTSELEN;
else
- ret &= ~(1 << 5);
+ ret &= ~GPIO_CTRL_SLOTSELEN;
ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
out:
mutex_unlock(&the_menelaus->lock);
}
EXPORT_SYMBOL(menelaus_set_slot_sel);
+int menelaus_enable_slot(int slot, int enable)
+{
+ int ret, val;
+
+ mutex_lock(&the_menelaus->lock);
+ ret = menelaus_read_reg(MENELAUS_MCT_CTRL3);
+ if (ret < 0)
+ goto out;
+ val = ret;
+ if (slot == 1) {
+ if (enable)
+ val |= MCT_CTRL3_SLOT1_EN;
+ else
+ val &= ~MCT_CTRL3_SLOT1_EN;
+ } else {
+ if (enable)
+ val |= MCT_CTRL3_SLOT2_EN;
+ else
+ val &= MCT_CTRL3_SLOT2_EN;
+ }
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
+
+out:
+ mutex_unlock(&the_menelaus->lock);
+ return ret;
+}
+EXPORT_SYMBOL(menelaus_enable_slot);
+
int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
{
int ret, val;
val = ret;
if (slot == 1) {
if (cd_en)
- val |= (1 << 4) | (1 << 6);
+ val |= MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN;
else
- val &= ~((1 << 4) | (1 << 6));
+ val &= ~(MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN);
} else {
if (cd_en)
- val |= (1 << 5) | (1 << 7);
+ val |= MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN;
else
- val &= ~((1 << 5) | (1 << 7));
+ val &= ~(MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN);
}
ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
if (ret < 0)
val = ret;
if (slot == 1) {
if (enable)
- val |= 1 << 0;
+ val |= MCT_CTRL3_SLOT1_EN;
else
- val &= ~(1 << 0);
+ val &= ~MCT_CTRL3_SLOT1_EN;
} else {
int b;
if (enable)
- ret |= 1 << 1;
+ val |= MCT_CTRL3_SLOT2_EN;
else
- ret &= ~(1 << 1);
+ val &= ~MCT_CTRL3_SLOT2_EN;
b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
- b &= ~0x03;
+ b &= ~(MCT_CTRL2_VS2_SEL_D0 | MCT_CTRL2_VS2_SEL_D1);
b |= power;
ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
if (ret < 0)
goto out;
}
/* Disable autonomous shutdown */
- val &= ~(0x03 << 2);
+ val &= ~(MCT_CTRL3_S1_AUTO_EN | MCT_CTRL3_S2_AUTO_EN);
ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
out:
mutex_unlock(&the_menelaus->lock);
if (!the_menelaus->vcore_hw_mode) {
val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
/* HW mode, turn OFF byte comparator */
- val |= ((1 << 7) | (1 << 5));
+ val |= (VCORE_CTRL1_HW_NSW | VCORE_CTRL1_BYP_COMP);
ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
the_menelaus->vcore_hw_mode = 1;
}
ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
if (ret < 0)
goto out;
- t = ((1 << 6) | 0x04);
+ t = (GPIO_CTRL_SLPCTLEN | GPIO3_DIR_INPUT);
if (enable)
ret |= t;
else
return status;
status = menelaus_write_reg(MENELAUS_RTC_WKDAY, BIN2BCD(t->tm_wday));
if (status < 0) {
- dev_err(&the_menelaus->client->dev, "rtc write reg %02x "
+ dev_err(&the_menelaus->client->dev, "rtc write reg %02x"
"err %d\n", MENELAUS_RTC_WKDAY, status);
return status;
}
/* If a true probe check the device */
rev = menelaus_read_reg(MENELAUS_REV);
if (rev < 0) {
- pr_err(DRIVER_NAME ": device not found");
+ dev_err(&client->dev, "device not found");
err = -ENODEV;
goto fail1;
}
err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
DRIVER_NAME, menelaus);
if (err) {
- dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
+ dev_dbg(&client->dev, "can't get IRQ %d, err %d",
client->irq, err);
goto fail1;
}
mutex_init(&menelaus->lock);
INIT_WORK(&menelaus->work, menelaus_work);
- pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
+ dev_info(&client->dev, "Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
if (val < 0)
static int __init menelaus_init(void)
{
- int res;
-
- res = i2c_add_driver(&menelaus_i2c_driver);
- if (res < 0) {
- pr_err(DRIVER_NAME ": driver registration failed\n");
- return res;
- }
-
- return 0;
+ return i2c_add_driver(&menelaus_i2c_driver);
}
static void __exit menelaus_exit(void)
git.openpandora.org / pandora-kernel.git / blobdiff