hwmon/w83627ehf: Add support for the W83627DHG chip

[pandora-kernel.git] / drivers / hwmon / w83627ehf.c

diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 212a155..da5828f 100644 (file)
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -32,8 +32,10 @@
 
     Supports the following chips:
 
-    Chip        #vin    #fan    #pwm    #temp   chip_id    man_id
-    w83627ehf   10      5       4       3       0x88,0xa1  0x5ca3
+    Chip        #vin    #fan    #pwm    #temp  chip IDs       man ID
+    w83627ehf   10      5       4       3      0x8850 0x88    0x5ca3
+                                               0x8860 0xa1
+    w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
 */
 
 #include <linux/module.h>
@@ -55,8 +57,18 @@ static unsigned short address;
  * Super-I/O constants and functions
  */
 
+/*
+ * The three following globals are initialized in w83627ehf_find(), before
+ * the i2c-isa device is created. Otherwise, they could be stored in
+ * w83627ehf_data. This is ugly, but necessary, and when the driver is next
+ * updated to become a platform driver, the globals will disappear.
+ */
 static int REG;                /* The register to read/write */
 static int VAL;                /* The value to read/write */
+/* The w83627ehf/ehg have 10 voltage inputs, but the w83627dhg has 9. This
+ * value is also used in w83627ehf_detect() to export a device name in sysfs
+ * (e.g. w83627ehf or w83627dhg) */
+static int w83627ehf_num_in;
 
 #define W83627EHF_LD_HWM       0x0b
 
@@ -65,8 +77,10 @@ static int VAL;              /* The value to read/write */
 #define SIO_REG_ENABLE         0x30    /* Logical device enable */
 #define SIO_REG_ADDR           0x60    /* Logical device address (2 bytes) */
 
-#define SIO_W83627EHF_ID       0x8840
-#define SIO_ID_MASK            0xFFC0
+#define SIO_W83627EHF_ID       0x8850
+#define SIO_W83627EHG_ID       0x8860
+#define SIO_W83627DHG_ID       0xa020
+#define SIO_ID_MASK            0xFFF0
 
 static inline void
 superio_outb(int reg, int val)
@@ -115,8 +129,12 @@ superio_exit(void)
 
 #define W83627EHF_REG_BANK             0x4E
 #define W83627EHF_REG_CONFIG           0x40
-#define W83627EHF_REG_CHIP_ID          0x49
-#define W83627EHF_REG_MAN_ID           0x4F
+
+/* Not currently used:
+ * REG_MAN_ID has the value 0x5ca3 for all supported chips.
+ * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
+ * REG_MAN_ID is at port 0x4f
+ * REG_CHIP_ID is at port 0x58 */
 
 static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 };
 static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };
@@ -429,7 +447,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
                }
 
                /* Measured voltages and limits */
-               for (i = 0; i < 10; i++) {
+               for (i = 0; i < w83627ehf_num_in; i++) {
                        data->in[i] = w83627ehf_read_value(client,
                                      W83627EHF_REG_IN(i));
                        data->in_min[i] = w83627ehf_read_value(client,
@@ -1121,7 +1139,7 @@ static void w83627ehf_device_remove_files(struct device *dev)
                device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
        for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
                device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
-       for (i = 0; i < 10; i++) {
+       for (i = 0; i < w83627ehf_num_in; i++) {
                device_remove_file(dev, &sda_in_input[i].dev_attr);
                device_remove_file(dev, &sda_in_alarm[i].dev_attr);
                device_remove_file(dev, &sda_in_min[i].dev_attr);
@@ -1196,7 +1214,11 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
        client->flags = 0;
        dev = &client->dev;
 
-       strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
+       if (w83627ehf_num_in == 9)
+               strlcpy(client->name, "w83627dhg", I2C_NAME_SIZE);
+       else    /* just say ehf. 627EHG is 627EHF in lead-free packaging. */
+               strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
+
        data->valid = 0;
        mutex_init(&data->update_lock);
 
@@ -1246,7 +1268,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
                                goto exit_remove;
                }
 
-       for (i = 0; i < 10; i++)
+       for (i = 0; i < w83627ehf_num_in; i++)
                if ((err = device_create_file(dev, &sda_in_input[i].dev_attr))
                        || (err = device_create_file(dev,
                                &sda_in_alarm[i].dev_attr))
@@ -1340,7 +1362,17 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr)
 
        val = (superio_inb(SIO_REG_DEVID) << 8)
            | superio_inb(SIO_REG_DEVID + 1);
-       if ((val & SIO_ID_MASK) != SIO_W83627EHF_ID) {
+       switch (val & SIO_ID_MASK) {
+       case SIO_W83627DHG_ID:
+               w83627ehf_num_in = 9;
+               break;
+       case SIO_W83627EHF_ID:
+       case SIO_W83627EHG_ID:
+               w83627ehf_num_in = 10;
+               break;
+       default:
+               printk(KERN_WARNING "w83627ehf: unsupported chip ID: 0x%04x\n",
+                       val);
                superio_exit();
                return -ENODEV;
        }