rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
if (newpage != page)
- rv = -EINVAL;
+ rv = -EIO;
else
data->currpage = page;
}
return status;
}
if (reg >= PMBUS_VIRT_BASE)
- return -EINVAL;
+ return -ENXIO;
return pmbus_write_word_data(client, page, reg, word);
}
return status;
}
if (reg >= PMBUS_VIRT_BASE)
- return -EINVAL;
+ return -ENXIO;
return pmbus_read_word_data(client, page, reg);
}
{
int status, status2;
- status = pmbus_read_byte_data(client, -1, PMBUS_STATUS_BYTE);
+ status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_BYTE);
if (status < 0 || (status & PB_STATUS_CML)) {
- status2 = pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
+ status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
- return -EINVAL;
+ return -EIO;
}
return 0;
}
for (i = 0; i < info->pages; i++)
data->status[PB_STATUS_BASE + i]
- = pmbus_read_byte_data(client, i,
- PMBUS_STATUS_BYTE);
+ = _pmbus_read_byte_data(client, i,
+ PMBUS_STATUS_BYTE);
for (i = 0; i < info->pages; i++) {
if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT))
continue;
exponent = data->exponent;
mantissa = (u16) sensor->data;
} else { /* LINEAR11 */
- exponent = (sensor->data >> 11) & 0x001f;
- mantissa = sensor->data & 0x07ff;
-
- if (exponent > 0x0f)
- exponent |= 0xffe0; /* sign extend exponent */
- if (mantissa > 0x03ff)
- mantissa |= 0xfffff800; /* sign extend mantissa */
+ exponent = ((s16)sensor->data) >> 11;
+ mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5;
}
val = mantissa;
}
};
-static const struct pmbus_limit_attr temp_limit_attrs23[] = {
+static const struct pmbus_limit_attr temp_limit_attrs2[] = {
+ {
+ .reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_TEMP_UT_WARNING,
+ }, {
+ .reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_TEMP_UT_FAULT,
+ }, {
+ .reg = PMBUS_OT_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_TEMP_OT_WARNING,
+ }, {
+ .reg = PMBUS_OT_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_TEMP_OT_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP2_MIN,
+ .attr = "lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP2_MAX,
+ .attr = "highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_TEMP2_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_limit_attr temp_limit_attrs3[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
.low = true,
.sfunc = PMBUS_HAVE_STATUS_TEMP,
.sbase = PB_STATUS_TEMP_BASE,
.gbit = PB_STATUS_TEMPERATURE,
- .limit = temp_limit_attrs23,
- .nlimit = ARRAY_SIZE(temp_limit_attrs23),
+ .limit = temp_limit_attrs2,
+ .nlimit = ARRAY_SIZE(temp_limit_attrs2),
}, {
.reg = PMBUS_READ_TEMPERATURE_3,
.class = PSC_TEMPERATURE,
.sfunc = PMBUS_HAVE_STATUS_TEMP,
.sbase = PB_STATUS_TEMP_BASE,
.gbit = PB_STATUS_TEMPERATURE,
- .limit = temp_limit_attrs23,
- .nlimit = ARRAY_SIZE(temp_limit_attrs23),
+ .limit = temp_limit_attrs3,
+ .nlimit = ARRAY_SIZE(temp_limit_attrs3),
}
};
static int pmbus_identify_common(struct i2c_client *client,
struct pmbus_data *data)
{
- int vout_mode = -1, exponent;
+ int vout_mode = -1;
if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE))
- vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+ vout_mode = _pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
if (vout_mode >= 0 && vout_mode != 0xff) {
/*
* Not all chips support the VOUT_MODE command,
if (data->info->format[PSC_VOLTAGE_OUT] != linear)
return -ENODEV;
- exponent = vout_mode & 0x1f;
- /* and sign-extend it */
- if (exponent & 0x10)
- exponent |= ~0x1f;
- data->exponent = exponent;
+ data->exponent = ((s8)(vout_mode << 3)) >> 3;
break;
case 1: /* VID mode */
if (data->info->format[PSC_VOLTAGE_OUT] != vid)
if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
dev_err(&client->dev, "Bad number of PMBus pages: %d\n",
info->pages);
- ret = -EINVAL;
+ ret = -ENODEV;
goto out_data;
}
}
EXPORT_SYMBOL_GPL(pmbus_do_probe);
-int pmbus_do_remove(struct i2c_client *client)
+void pmbus_do_remove(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
kfree(data->booleans);
kfree(data->sensors);
kfree(data);
- return 0;
}
EXPORT_SYMBOL_GPL(pmbus_do_remove);