IT8726F Super I/O chip w/LPC interface
Sis950 A clone of the IT8705F
- Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com>
- Copyright (C) 2005-2006 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2001 Chris Gauthron
+ Copyright (C) 2005-2007 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
enum chips { it87, it8712, it8716, it8718 };
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
static struct platform_device *pdev;
#define REG 0x2e /* The register to read/write */
/* The IT8718F has the VID value in a different register, in Super-I/O
configuration space. */
#define IT87_REG_VID 0x0a
-/* Warning: register 0x0b is used for something completely different in
- new chips/revisions. I suspect only 16-bit tachometer mode will work
- for these. */
+/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
+ for fan divisors. Later IT8712F revisions must use 16-bit tachometer
+ mode. */
#define IT87_REG_FAN_DIV 0x0b
#define IT87_REG_FAN_16BIT 0x0c
struct it87_sio_data {
enum chips type;
/* Values read from Super-I/O config space */
+ u8 revision;
u8 vid_value;
};
struct it87_data {
struct device *hwmon_dev;
enum chips type;
+ u8 revision;
unsigned short addr;
const char *name;
u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
};
+static inline int has_16bit_fans(const struct it87_data *data)
+{
+ /* IT8705F Datasheet 0.4.1, 3h == Version G.
+ IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
+ These are the first revisions with 16bit tachometer support. */
+ return (data->type == it87 && data->revision >= 0x03)
+ || (data->type == it8712 && data->revision >= 0x08)
+ || data->type == it8716
+ || data->type == it8718;
+}
static int it87_probe(struct platform_device *pdev);
static int __devexit it87_remove(struct platform_device *pdev);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
+
static ssize_t
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
&sensor_dev_attr_in5_max.dev_attr.attr,
&sensor_dev_attr_in6_max.dev_attr.attr,
&sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp1_type.dev_attr.attr,
&sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
&dev_attr_alarms.attr,
&dev_attr_name.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan5_alarm.dev_attr.attr,
+
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
+ &dev_attr_pwm1_freq.attr,
+ &dev_attr_pwm2_freq.attr,
+ &dev_attr_pwm3_freq.attr,
&dev_attr_vrm.attr,
&dev_attr_cpu0_vid.attr,
u16 chip_type;
superio_enter();
- chip_type = superio_inw(DEVID);
+ chip_type = force_id ? force_id : superio_inw(DEVID);
switch (chip_type) {
case IT8705F_DEVID:
}
err = 0;
+ sio_data->revision = superio_inb(DEVREV) & 0x0f;
pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
- chip_type, *address, superio_inb(DEVREV) & 0x0f);
+ chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
if (chip_type != IT8705F_DEVID) {
data->addr = res->start;
data->type = sio_data->type;
+ data->revision = sio_data->revision;
data->name = names[sio_data->type];
/* Now, we do the remaining detection. */
goto ERROR2;
/* Do not create fan files for disabled fans */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
/* 16-bit tachometers */
if (data->has_fan & (1 << 0)) {
if ((err = device_create_file(dev,
&sensor_dev_attr_fan1_input16.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_fan1_min16.dev_attr)))
+ &sensor_dev_attr_fan1_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan1_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 1)) {
if ((err = device_create_file(dev,
&sensor_dev_attr_fan2_input16.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_fan2_min16.dev_attr)))
+ &sensor_dev_attr_fan2_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan2_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 2)) {
if ((err = device_create_file(dev,
&sensor_dev_attr_fan3_input16.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_fan3_min16.dev_attr)))
+ &sensor_dev_attr_fan3_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 3)) {
if ((err = device_create_file(dev,
&sensor_dev_attr_fan4_input16.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_fan4_min16.dev_attr)))
+ &sensor_dev_attr_fan4_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan4_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 4)) {
if ((err = device_create_file(dev,
&sensor_dev_attr_fan5_input16.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_fan5_min16.dev_attr)))
+ &sensor_dev_attr_fan5_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan5_alarm.dev_attr)))
goto ERROR4;
}
} else {
|| (err = device_create_file(dev,
&sensor_dev_attr_fan1_min.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_fan1_div.dev_attr)))
+ &sensor_dev_attr_fan1_div.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan1_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 1)) {
|| (err = device_create_file(dev,
&sensor_dev_attr_fan2_min.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_fan2_div.dev_attr)))
+ &sensor_dev_attr_fan2_div.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan2_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 2)) {
|| (err = device_create_file(dev,
&sensor_dev_attr_fan3_min.dev_attr))
|| (err = device_create_file(dev,
- &sensor_dev_attr_fan3_div.dev_attr)))
+ &sensor_dev_attr_fan3_div.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_alarm.dev_attr)))
goto ERROR4;
}
}
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
/* Set tachometers to 16-bit mode if needed */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
if (~tmp & 0x07 & data->has_fan) {
dev_dbg(&pdev->dev,
it87_write_value(data, IT87_REG_FAN_16BIT,
tmp | 0x07);
}
- if (tmp & (1 << 4))
- data->has_fan |= (1 << 3); /* fan4 enabled */
- if (tmp & (1 << 5))
- data->has_fan |= (1 << 4); /* fan5 enabled */
+ /* IT8705F only supports three fans. */
+ if (data->type != it87) {
+ if (tmp & (1 << 4))
+ data->has_fan |= (1 << 3); /* fan4 enabled */
+ if (tmp & (1 << 5))
+ data->has_fan |= (1 << 4); /* fan5 enabled */
+ }
}
/* Set current fan mode registers and the default settings for the
data->fan[i] = it87_read_value(data,
IT87_REG_FAN[i]);
/* Add high byte if in 16-bit mode */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
data->fan[i] |= it87_read_value(data,
IT87_REG_FANX[i]) << 8;
data->fan_min[i] |= it87_read_value(data,
}
/* Newer chips don't have clock dividers */
- if ((data->has_fan & 0x07) && data->type != it8716
- && data->type != it8718) {
+ if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
i = it87_read_value(data, IT87_REG_FAN_DIV);
data->fan_div[0] = i & 0x07;
data->fan_div[1] = (i >> 3) & 0x07;
data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
- /* The 8705 does not have VID capability */
+ /* The 8705 does not have VID capability.
+ The 8718 does not use IT87_REG_VID for the same purpose. */
if (data->type == it8712 || data->type == it8716) {
data->vid = it87_read_value(data, IT87_REG_VID);
/* The older IT8712F revisions had only 5 VID pins,
}
-MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>, "
+MODULE_AUTHOR("Chris Gauthron, "
"Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8726F, SiS950 driver");
module_param(update_vbat, bool, 0);
git.openpandora.org / pandora-kernel.git / blobdiff