enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg,
f71889fg, f71889ed, f71889a, f8000, f81865f };
-static const char *f71882fg_names[] = {
+static const char *const f71882fg_names[] = {
"f71808e",
"f71808a",
"f71858fg",
u16 fan_full_speed[4];
u8 fan_status;
u8 fan_beep;
- /* Note: all models have max 3 temperature channels, but on some
- they are addressed as 0-2 and on others as 1-3, so for coding
- convenience we reserve space for 4 channels */
+ /*
+ * Note: all models have max 3 temperature channels, but on some
+ * they are addressed as 0-2 and on others as 1-3, so for coding
+ * convenience we reserve space for 4 channels
+ */
u16 temp[4];
u8 temp_ovt[4];
u8 temp_high[4];
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
char *buf);
-static int __devinit f71882fg_probe(struct platform_device * pdev);
+static int __devinit f71882fg_probe(struct platform_device *pdev);
static int f71882fg_remove(struct platform_device *pdev);
static struct platform_driver f71882fg_driver = {
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-/* Temp attr for the f71858fg, the f71858fg is special as it has its
- temperature indexes start at 0 (the others start at 1) */
+/*
+ * Temp attr for the f71858fg, the f71858fg is special as it has its
+ * temperature indexes start at 0 (the others start at 1)
+ */
static struct sensor_device_attribute_2 f71858fg_temp_attr[] = {
SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
store_temp_max, 0, 1),
SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
store_temp_max_hyst, 0, 1),
- /* Should really be temp1_max_alarm, but older versions did not handle
- the max and crit alarms separately and lm_sensors v2 depends on the
- presence of temp#_alarm files. The same goes for temp2/3 _alarm. */
+ /*
+ * Should really be temp1_max_alarm, but older versions did not handle
+ * the max and crit alarms separately and lm_sensors v2 depends on the
+ * presence of temp#_alarm files. The same goes for temp2/3 _alarm.
+ */
SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
store_temp_crit, 0, 1),
store_temp_beep, 0, 7),
} };
-/* Temp attr for the f8000
- Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
- is used as hysteresis value to clear alarms
- Also like the f71858fg its temperature indexes start at 0
+/*
+ * Temp attr for the f8000
+ * Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
+ * is used as hysteresis value to clear alarms
+ * Also like the f71858fg its temperature indexes start at 0
*/
static struct sensor_device_attribute_2 f8000_temp_attr[] = {
SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
store_fan_beep, 0, 3),
};
-/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
- standard models */
+/*
+ * PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
+ * standard models
+ */
static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[3][7] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
} };
-/* PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the
- pwm setting when the temperature is above the pwmX_auto_point1_temp can be
- programmed instead of being hardcoded to 0xff */
+/*
+ * PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the
+ * pwm setting when the temperature is above the pwmX_auto_point1_temp can be
+ * programmed instead of being hardcoded to 0xff
+ */
static struct sensor_device_attribute_2 f71869_auto_pwm_attr[3][8] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
};
-/* PWM attr for the f8000, zones mapped to temp instead of to pwm!
- Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
- F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+/*
+ * PWM attr for the f8000, zones mapped to temp instead of to pwm!
+ * Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
+ * F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0
+ */
static struct sensor_device_attribute_2 f8000_auto_pwm_attr[3][14] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
data->temp_config =
f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG);
if (data->temp_config & 0x10)
- /* The f71858fg temperature alarms behave as
- the f8000 alarms in this mode */
+ /*
+ * The f71858fg temperature alarms behave as
+ * the f8000 alarms in this mode
+ */
err = f71882fg_create_sysfs_files(pdev,
f8000_temp_attr,
ARRAY_SIZE(f8000_temp_attr));
git.openpandora.org / pandora-kernel.git / blobdiff