#define AVIVO_DVOA_BIT_DEPTH_CONTROL 0x7988
#define AVIVO_DC_GPIO_HPD_A 0x7e94
-
-#define AVIVO_GPIO_0 0x7e30
-#define AVIVO_GPIO_1 0x7e40
-#define AVIVO_GPIO_2 0x7e50
-#define AVIVO_GPIO_3 0x7e60
-
#define AVIVO_DC_GPIO_HPD_Y 0x7e9c
-#define AVIVO_I2C_STATUS 0x7d30
-# define AVIVO_I2C_STATUS_DONE (1 << 0)
-# define AVIVO_I2C_STATUS_NACK (1 << 1)
-# define AVIVO_I2C_STATUS_HALT (1 << 2)
-# define AVIVO_I2C_STATUS_GO (1 << 3)
-# define AVIVO_I2C_STATUS_MASK 0x7
-/* If radeon_mm_i2c is to be believed, this is HALT, NACK, and maybe
- * DONE? */
-# define AVIVO_I2C_STATUS_CMD_RESET 0x7
-# define AVIVO_I2C_STATUS_CMD_WAIT (1 << 3)
-#define AVIVO_I2C_STOP 0x7d34
-#define AVIVO_I2C_START_CNTL 0x7d38
-# define AVIVO_I2C_START (1 << 8)
-# define AVIVO_I2C_CONNECTOR0 (0 << 16)
-# define AVIVO_I2C_CONNECTOR1 (1 << 16)
-#define R520_I2C_START (1<<0)
-#define R520_I2C_STOP (1<<1)
-#define R520_I2C_RX (1<<2)
-#define R520_I2C_EN (1<<8)
-#define R520_I2C_DDC1 (0<<16)
-#define R520_I2C_DDC2 (1<<16)
-#define R520_I2C_DDC3 (2<<16)
-#define R520_I2C_DDC_MASK (3<<16)
-#define AVIVO_I2C_CONTROL2 0x7d3c
-# define AVIVO_I2C_7D3C_SIZE_SHIFT 8
-# define AVIVO_I2C_7D3C_SIZE_MASK (0xf << 8)
-#define AVIVO_I2C_CONTROL3 0x7d40
-/* Reading is done 4 bytes at a time: read the bottom 8 bits from
- * 7d44, four times in a row.
- * Writing is a little more complex. First write DATA with
- * 0xnnnnnnzz, then 0xnnnnnnyy, where nnnnnn is some non-deterministic
- * magic number, zz is, I think, the slave address, and yy is the byte
- * you want to write. */
-#define AVIVO_I2C_DATA 0x7d44
-#define R520_I2C_ADDR_COUNT_MASK (0x7)
-#define R520_I2C_DATA_COUNT_SHIFT (8)
-#define R520_I2C_DATA_COUNT_MASK (0xF00)
-#define AVIVO_I2C_CNTL 0x7d50
-# define AVIVO_I2C_EN (1 << 0)
-# define AVIVO_I2C_RESET (1 << 8)
+#define AVIVO_DC_I2C_STATUS1 0x7d30
+# define AVIVO_DC_I2C_DONE (1 << 0)
+# define AVIVO_DC_I2C_NACK (1 << 1)
+# define AVIVO_DC_I2C_HALT (1 << 2)
+# define AVIVO_DC_I2C_GO (1 << 3)
+#define AVIVO_DC_I2C_RESET 0x7d34
+# define AVIVO_DC_I2C_SOFT_RESET (1 << 0)
+# define AVIVO_DC_I2C_ABORT (1 << 8)
+#define AVIVO_DC_I2C_CONTROL1 0x7d38
+# define AVIVO_DC_I2C_START (1 << 0)
+# define AVIVO_DC_I2C_STOP (1 << 1)
+# define AVIVO_DC_I2C_RECEIVE (1 << 2)
+# define AVIVO_DC_I2C_EN (1 << 8)
+# define AVIVO_DC_I2C_PIN_SELECT(x) ((x) << 16)
+# define AVIVO_SEL_DDC1 0
+# define AVIVO_SEL_DDC2 1
+# define AVIVO_SEL_DDC3 2
+#define AVIVO_DC_I2C_CONTROL2 0x7d3c
+# define AVIVO_DC_I2C_ADDR_COUNT(x) ((x) << 0)
+# define AVIVO_DC_I2C_DATA_COUNT(x) ((x) << 8)
+#define AVIVO_DC_I2C_CONTROL3 0x7d40
+# define AVIVO_DC_I2C_DATA_DRIVE_EN (1 << 0)
+# define AVIVO_DC_I2C_DATA_DRIVE_SEL (1 << 1)
+# define AVIVO_DC_I2C_CLK_DRIVE_EN (1 << 7)
+# define AVIVO_DC_I2C_RD_INTRA_BYTE_DELAY(x) ((x) << 8)
+# define AVIVO_DC_I2C_WR_INTRA_BYTE_DELAY(x) ((x) << 16)
+# define AVIVO_DC_I2C_TIME_LIMIT(x) ((x) << 24)
+#define AVIVO_DC_I2C_DATA 0x7d44
+#define AVIVO_DC_I2C_INTERRUPT_CONTROL 0x7d48
+# define AVIVO_DC_I2C_INTERRUPT_STATUS (1 << 0)
+# define AVIVO_DC_I2C_INTERRUPT_AK (1 << 8)
+# define AVIVO_DC_I2C_INTERRUPT_ENABLE (1 << 16)
+#define AVIVO_DC_I2C_ARBITRATION 0x7d50
+# define AVIVO_DC_I2C_SW_WANTS_TO_USE_I2C (1 << 0)
+# define AVIVO_DC_I2C_SW_CAN_USE_I2C (1 << 1)
+# define AVIVO_DC_I2C_SW_DONE_USING_I2C (1 << 8)
+# define AVIVO_DC_I2C_HW_NEEDS_I2C (1 << 9)
+# define AVIVO_DC_I2C_ABORT_HDCP_I2C (1 << 16)
+# define AVIVO_DC_I2C_HW_USING_I2C (1 << 17)
+
+#define AVIVO_DC_GPIO_DDC1_MASK 0x7e40
+#define AVIVO_DC_GPIO_DDC1_A 0x7e44
+#define AVIVO_DC_GPIO_DDC1_EN 0x7e48
+#define AVIVO_DC_GPIO_DDC1_Y 0x7e4c
+
+#define AVIVO_DC_GPIO_DDC2_MASK 0x7e50
+#define AVIVO_DC_GPIO_DDC2_A 0x7e54
+#define AVIVO_DC_GPIO_DDC2_EN 0x7e58
+#define AVIVO_DC_GPIO_DDC2_Y 0x7e5c
+
+#define AVIVO_DC_GPIO_DDC3_MASK 0x7e60
+#define AVIVO_DC_GPIO_DDC3_A 0x7e64
+#define AVIVO_DC_GPIO_DDC3_EN 0x7e68
+#define AVIVO_DC_GPIO_DDC3_Y 0x7e6c
#define AVIVO_DISP_INTERRUPT_STATUS 0x7edc
# define AVIVO_D1_VBLANK_INTERRUPT (1 << 4)
git.openpandora.org / pandora-kernel.git / blobdiff