pipe_name(pipe));
}
+static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 port_sel, u32 val)
+{
+ if ((val & DP_PORT_EN) == 0)
+ return false;
+
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
+ u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
+ if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
+ return false;
+ } else {
+ if ((val & DP_PIPE_MASK) != (pipe << 30))
+ return false;
+ }
+ return true;
+}
+
+static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & PORT_ENABLE) == 0)
+ return false;
+
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
+ return false;
+ }
+ return true;
+}
+
+static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & LVDS_PORT_EN) == 0)
+ return false;
+
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
+ return false;
+ }
+ return true;
+}
+
+static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & ADPA_DAC_ENABLE) == 0)
+ return false;
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
+ return false;
+ }
+ return true;
+}
+
static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
- enum pipe pipe, int reg)
+ enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
- WARN(DP_PIPE_ENABLED(val, pipe),
+ WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
}
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
- WARN(HDMI_PIPE_ENABLED(val, pipe),
+ WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
}
int reg;
u32 val;
- assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B);
- assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C);
- assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D);
+ assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
+ assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
+ assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
reg = PCH_ADPA;
val = I915_READ(reg);
- WARN(ADPA_PIPE_ENABLED(val, pipe),
+ WARN(adpa_pipe_enabled(dev_priv, val, pipe),
"PCH VGA enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
reg = PCH_LVDS;
val = I915_READ(reg);
- WARN(LVDS_PIPE_ENABLED(val, pipe),
+ WARN(lvds_pipe_enabled(dev_priv, val, pipe),
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
intel_wait_for_pipe_off(dev_priv->dev, pipe);
}
+/*
+ * Plane regs are double buffered, going from enabled->disabled needs a
+ * trigger in order to latch. The display address reg provides this.
+ */
+static void intel_flush_display_plane(struct drm_i915_private *dev_priv,
+ enum plane plane)
+{
+ I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
+ I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
+}
+
/**
* intel_enable_plane - enable a display plane on a given pipe
* @dev_priv: i915 private structure
return;
I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
+ intel_flush_display_plane(dev_priv, plane);
intel_wait_for_vblank(dev_priv->dev, pipe);
}
-/*
- * Plane regs are double buffered, going from enabled->disabled needs a
- * trigger in order to latch. The display address reg provides this.
- */
-static void intel_flush_display_plane(struct drm_i915_private *dev_priv,
- enum plane plane)
-{
- u32 reg = DSPADDR(plane);
- I915_WRITE(reg, I915_READ(reg));
-}
-
/**
* intel_disable_plane - disable a display plane
* @dev_priv: i915 private structure
}
static void disable_pch_dp(struct drm_i915_private *dev_priv,
- enum pipe pipe, int reg)
+ enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
- if (DP_PIPE_ENABLED(val, pipe))
+ if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
+ DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
I915_WRITE(reg, val & ~DP_PORT_EN);
+ }
}
static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
- if (HDMI_PIPE_ENABLED(val, pipe))
+ if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
+ DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
+ reg, pipe);
I915_WRITE(reg, val & ~PORT_ENABLE);
+ }
}
/* Disable any ports connected to this transcoder */
val = I915_READ(PCH_PP_CONTROL);
I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);
- disable_pch_dp(dev_priv, pipe, PCH_DP_B);
- disable_pch_dp(dev_priv, pipe, PCH_DP_C);
- disable_pch_dp(dev_priv, pipe, PCH_DP_D);
+ disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
+ disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
+ disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
reg = PCH_ADPA;
val = I915_READ(reg);
- if (ADPA_PIPE_ENABLED(val, pipe))
+ if (adpa_pipe_enabled(dev_priv, val, pipe))
I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
reg = PCH_LVDS;
val = I915_READ(reg);
- if (LVDS_PIPE_ENABLED(val, pipe)) {
+ if (lvds_pipe_enabled(dev_priv, val, pipe)) {
+ DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
I915_WRITE(reg, val & ~LVDS_PORT_EN);
POSTING_READ(reg);
udelay(100);
/* no fb bound */
if (!crtc->fb) {
- DRM_DEBUG_KMS("No FB bound\n");
+ DRM_ERROR("No FB bound\n");
return 0;
}
case 1:
break;
default:
+ DRM_ERROR("no plane for crtc\n");
return -EINVAL;
}
NULL);
if (ret != 0) {
mutex_unlock(&dev->struct_mutex);
+ DRM_ERROR("pin & fence failed\n");
return ret;
}
if (ret) {
i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
mutex_unlock(&dev->struct_mutex);
+ DRM_ERROR("failed to update base address\n");
return ret;
}
FDI_FE_ERRC_ENABLE);
}
+static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 flags = I915_READ(SOUTH_CHICKEN1);
+
+ flags |= FDI_PHASE_SYNC_OVR(pipe);
+ I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
+ flags |= FDI_PHASE_SYNC_EN(pipe);
+ I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
+ POSTING_READ(SOUTH_CHICKEN1);
+}
+
/* The FDI link training functions for ILK/Ibexpeak. */
static void ironlake_fdi_link_train(struct drm_crtc *crtc)
{
POSTING_READ(reg);
udelay(150);
+ if (HAS_PCH_CPT(dev))
+ cpt_phase_pointer_enable(dev, pipe);
+
for (i = 0; i < 4; i++ ) {
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
POSTING_READ(reg);
udelay(150);
+ if (HAS_PCH_CPT(dev))
+ cpt_phase_pointer_enable(dev, pipe);
+
for (i = 0; i < 4; i++ ) {
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
}
}
+static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 flags = I915_READ(SOUTH_CHICKEN1);
+
+ flags &= ~(FDI_PHASE_SYNC_EN(pipe));
+ I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
+ flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
+ I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
+ POSTING_READ(SOUTH_CHICKEN1);
+}
static void ironlake_fdi_disable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
I915_WRITE(FDI_RX_CHICKEN(pipe),
I915_READ(FDI_RX_CHICKEN(pipe) &
~FDI_RX_PHASE_SYNC_POINTER_EN));
+ } else if (HAS_PCH_CPT(dev)) {
+ cpt_phase_pointer_disable(dev, pipe);
}
/* still set train pattern 1 */
I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
}
+ /*
+ * On ILK+ LUT must be loaded before the pipe is running but with
+ * clocks enabled
+ */
+ intel_crtc_load_lut(crtc);
+
intel_enable_pipe(dev_priv, pipe, is_pch_port);
intel_enable_plane(dev_priv, plane, pipe);
if (is_pch_port)
ironlake_pch_enable(crtc);
- intel_crtc_load_lut(crtc);
-
mutex_lock(&dev->struct_mutex);
intel_update_fbc(dev);
mutex_unlock(&dev->struct_mutex);
if (connector->encoder != encoder)
continue;
- if (connector->display_info.bpc < display_bpc) {
+ /* Don't use an invalid EDID bpc value */
+ if (connector->display_info.bpc &&
+ connector->display_info.bpc < display_bpc) {
DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
display_bpc = connector->display_info.bpc;
}
return ret;
}
+static void ironlake_update_pch_refclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_crtc *crtc;
+ struct intel_encoder *encoder;
+ struct intel_encoder *has_edp_encoder = NULL;
+ u32 temp;
+ bool has_lvds = false;
+
+ /* We need to take the global config into account */
+ list_for_each_entry(crtc, &mode_config->crtc_list, head) {
+ if (!crtc->enabled)
+ continue;
+
+ list_for_each_entry(encoder, &mode_config->encoder_list,
+ base.head) {
+ if (encoder->base.crtc != crtc)
+ continue;
+
+ switch (encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ has_lvds = true;
+ case INTEL_OUTPUT_EDP:
+ has_edp_encoder = encoder;
+ break;
+ }
+ }
+ }
+
+ /* Ironlake: try to setup display ref clock before DPLL
+ * enabling. This is only under driver's control after
+ * PCH B stepping, previous chipset stepping should be
+ * ignoring this setting.
+ */
+ temp = I915_READ(PCH_DREF_CONTROL);
+ /* Always enable nonspread source */
+ temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+ temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+
+ if (has_edp_encoder) {
+ if (intel_panel_use_ssc(dev_priv)) {
+ temp |= DREF_SSC1_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+ }
+ temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+ /* Enable CPU source on CPU attached eDP */
+ if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ if (intel_panel_use_ssc(dev_priv))
+ temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ else
+ temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+ } else {
+ /* Enable SSC on PCH eDP if needed */
+ if (intel_panel_use_ssc(dev_priv)) {
+ DRM_ERROR("enabling SSC on PCH\n");
+ temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
+ }
+ }
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+ }
+}
+
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
temp |= PIPE_12BPC;
break;
default:
- WARN(1, "intel_choose_pipe_bpp returned invalid value\n");
+ WARN(1, "intel_choose_pipe_bpp returned invalid value %d\n",
+ pipe_bpp);
temp |= PIPE_8BPC;
pipe_bpp = 24;
break;
ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
&m_n);
- /* Ironlake: try to setup display ref clock before DPLL
- * enabling. This is only under driver's control after
- * PCH B stepping, previous chipset stepping should be
- * ignoring this setting.
- */
- temp = I915_READ(PCH_DREF_CONTROL);
- /* Always enable nonspread source */
- temp &= ~DREF_NONSPREAD_SOURCE_MASK;
- temp |= DREF_NONSPREAD_SOURCE_ENABLE;
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
-
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
-
- if (has_edp_encoder) {
- if (intel_panel_use_ssc(dev_priv)) {
- temp |= DREF_SSC1_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
-
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
- }
- temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
-
- /* Enable CPU source on CPU attached eDP */
- if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
- if (intel_panel_use_ssc(dev_priv))
- temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
- else
- temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
- } else {
- /* Enable SSC on PCH eDP if needed */
- if (intel_panel_use_ssc(dev_priv)) {
- DRM_ERROR("enabling SSC on PCH\n");
- temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
- }
- }
- I915_WRITE(PCH_DREF_CONTROL, temp);
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
- }
+ ironlake_update_pch_refclk(dev);
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
if (has_reduced_clock)
} else if (is_sdvo && is_tv)
factor = 20;
- if (clock.m1 < factor * clock.n)
+ if (clock.m < factor * clock.n)
fp |= FP_CB_TUNE;
dpll = 0;
drm_vblank_post_modeset(dev, pipe);
+ intel_crtc->dpms_mode = DRM_MODE_DPMS_ON;
+
return ret;
}
ILK_DPARB_CLK_GATE |
ILK_DPFD_CLK_GATE);
- for_each_pipe(pipe)
+ for_each_pipe(pipe) {
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
DISPPLANE_TRICKLE_FEED_DISABLE);
+ intel_flush_display_plane(dev_priv, pipe);
+ }
}
static void ivybridge_init_clock_gating(struct drm_device *dev)
I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
- for_each_pipe(pipe)
+ for_each_pipe(pipe) {
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
DISPPLANE_TRICKLE_FEED_DISABLE);
+ intel_flush_display_plane(dev_priv, pipe);
+ }
}
static void g4x_init_clock_gating(struct drm_device *dev)
static void cpt_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe;
/*
* On Ibex Peak and Cougar Point, we need to disable clock
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
DPLS_EDP_PPS_FIX_DIS);
+ /* Without this, mode sets may fail silently on FDI */
+ for_each_pipe(pipe)
+ I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
}
static void ironlake_teardown_rc6(struct drm_device *dev)
/* Lenovo U160 cannot use SSC on LVDS */
{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
+
+ /* Sony Vaio Y cannot use SSC on LVDS */
+ { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
};
static void intel_init_quirks(struct drm_device *dev)
git.openpandora.org / pandora-kernel.git / blobdiff