* Eric Anholt <eric@anholt.net>
*/
+#include <linux/dmi.h>
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/input.h>
.find_pll = intel_find_pll_ironlake_dp,
};
+u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
+{
+ unsigned long flags;
+ u32 val = 0;
+
+ spin_lock_irqsave(&dev_priv->dpio_lock, flags);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO idle wait timed out\n");
+ goto out_unlock;
+ }
+
+ I915_WRITE(DPIO_REG, reg);
+ I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
+ DPIO_BYTE);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO read wait timed out\n");
+ goto out_unlock;
+ }
+ val = I915_READ(DPIO_DATA);
+
+out_unlock:
+ spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
+ return val;
+}
+
+static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
+ u32 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev_priv->dpio_lock, flags);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO idle wait timed out\n");
+ goto out_unlock;
+ }
+
+ I915_WRITE(DPIO_DATA, val);
+ I915_WRITE(DPIO_REG, reg);
+ I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
+ DPIO_BYTE);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
+ DRM_ERROR("DPIO write wait timed out\n");
+
+out_unlock:
+ spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
+}
+
+static void vlv_init_dpio(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* Reset the DPIO config */
+ I915_WRITE(DPIO_CTL, 0);
+ POSTING_READ(DPIO_CTL);
+ I915_WRITE(DPIO_CTL, 1);
+ POSTING_READ(DPIO_CTL);
+}
+
+static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
+{
+ DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
+ return 1;
+}
+
+static const struct dmi_system_id intel_dual_link_lvds[] = {
+ {
+ .callback = intel_dual_link_lvds_callback,
+ .ident = "Apple MacBook Pro (Core i5/i7 Series)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
+ },
+ },
+ { } /* terminating entry */
+};
+
+static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
+ unsigned int reg)
+{
+ unsigned int val;
+
+ /* use the module option value if specified */
+ if (i915_lvds_channel_mode > 0)
+ return i915_lvds_channel_mode == 2;
+
+ if (dmi_check_system(intel_dual_link_lvds))
+ return true;
+
+ if (dev_priv->lvds_val)
+ val = dev_priv->lvds_val;
+ else {
+ /* BIOS should set the proper LVDS register value at boot, but
+ * in reality, it doesn't set the value when the lid is closed;
+ * we need to check "the value to be set" in VBT when LVDS
+ * register is uninitialized.
+ */
+ val = I915_READ(reg);
+ if (!(val & ~LVDS_DETECTED))
+ val = dev_priv->bios_lvds_val;
+ dev_priv->lvds_val = val;
+ }
+ return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
+}
+
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
int refclk)
{
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP) {
+ if (is_dual_link_lvds(dev_priv, PCH_LVDS)) {
/* LVDS dual channel */
if (refclk == 100000)
limit = &intel_limits_ironlake_dual_lvds_100m;
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (is_dual_link_lvds(dev_priv, LVDS))
/* LVDS with dual channel */
limit = &intel_limits_g4x_dual_channel_lvds;
else
* reliably set up different single/dual channel state, if we
* even can.
*/
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (is_dual_link_lvds(dev_priv, LVDS))
clock.p2 = limit->p2.p2_fast;
else
clock.p2 = limit->p2.p2_slow;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- u32 reg, temp, i;
+ u32 reg, temp, i, retry;
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
for train result */
POSTING_READ(reg);
udelay(500);
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_BIT_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG_KMS("FDI train 1 done.\n");
- break;
+ for (retry = 0; retry < 5; retry++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_BIT_LOCK) {
+ I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+ DRM_DEBUG_KMS("FDI train 1 done.\n");
+ break;
+ }
+ udelay(50);
}
+ if (retry < 5)
+ break;
}
if (i == 4)
DRM_ERROR("FDI train 1 fail!\n");
POSTING_READ(reg);
udelay(500);
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_SYMBOL_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG_KMS("FDI train 2 done.\n");
- break;
+ for (retry = 0; retry < 5; retry++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_SYMBOL_LOCK) {
+ I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG_KMS("FDI train 2 done.\n");
+ break;
+ }
+ udelay(50);
}
+ if (retry < 5)
+ break;
}
if (i == 4)
DRM_ERROR("FDI train 2 fail!\n");
return true;
}
+static int valleyview_get_display_clock_speed(struct drm_device *dev)
+{
+ return 400000; /* FIXME */
+}
+
static int i945_get_display_clock_speed(struct drm_device *dev)
{
return 400000;
2,
G4X_FIFO_LINE_SIZE,
};
+static const struct intel_watermark_params valleyview_wm_info = {
+ VALLEYVIEW_FIFO_SIZE,
+ VALLEYVIEW_MAX_WM,
+ VALLEYVIEW_MAX_WM,
+ 2,
+ G4X_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params valleyview_cursor_wm_info = {
+ I965_CURSOR_FIFO,
+ VALLEYVIEW_CURSOR_MAX_WM,
+ I965_CURSOR_DFT_WM,
+ 2,
+ G4X_FIFO_LINE_SIZE,
+};
static const struct intel_watermark_params i965_cursor_wm_info = {
I965_CURSOR_FIFO,
I965_CURSOR_MAX_WM,
display, cursor);
}
+static bool vlv_compute_drain_latency(struct drm_device *dev,
+ int plane,
+ int *plane_prec_mult,
+ int *plane_dl,
+ int *cursor_prec_mult,
+ int *cursor_dl)
+{
+ struct drm_crtc *crtc;
+ int clock, pixel_size;
+ int entries;
+
+ crtc = intel_get_crtc_for_plane(dev, plane);
+ if (crtc->fb == NULL || !crtc->enabled)
+ return false;
+
+ clock = crtc->mode.clock; /* VESA DOT Clock */
+ pixel_size = crtc->fb->bits_per_pixel / 8; /* BPP */
+
+ entries = (clock / 1000) * pixel_size;
+ *plane_prec_mult = (entries > 256) ?
+ DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16;
+ *plane_dl = (64 * (*plane_prec_mult) * 4) / ((clock / 1000) *
+ pixel_size);
+
+ entries = (clock / 1000) * 4; /* BPP is always 4 for cursor */
+ *cursor_prec_mult = (entries > 256) ?
+ DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16;
+ *cursor_dl = (64 * (*cursor_prec_mult) * 4) / ((clock / 1000) * 4);
+
+ return true;
+}
+
+/*
+ * Update drain latency registers of memory arbiter
+ *
+ * Valleyview SoC has a new memory arbiter and needs drain latency registers
+ * to be programmed. Each plane has a drain latency multiplier and a drain
+ * latency value.
+ */
+
+static void vlv_update_drain_latency(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int planea_prec, planea_dl, planeb_prec, planeb_dl;
+ int cursora_prec, cursora_dl, cursorb_prec, cursorb_dl;
+ int plane_prec_mult, cursor_prec_mult; /* Precision multiplier is
+ either 16 or 32 */
+
+ /* For plane A, Cursor A */
+ if (vlv_compute_drain_latency(dev, 0, &plane_prec_mult, &planea_dl,
+ &cursor_prec_mult, &cursora_dl)) {
+ cursora_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
+ DDL_CURSORA_PRECISION_32 : DDL_CURSORA_PRECISION_16;
+ planea_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
+ DDL_PLANEA_PRECISION_32 : DDL_PLANEA_PRECISION_16;
+
+ I915_WRITE(VLV_DDL1, cursora_prec |
+ (cursora_dl << DDL_CURSORA_SHIFT) |
+ planea_prec | planea_dl);
+ }
+
+ /* For plane B, Cursor B */
+ if (vlv_compute_drain_latency(dev, 1, &plane_prec_mult, &planeb_dl,
+ &cursor_prec_mult, &cursorb_dl)) {
+ cursorb_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
+ DDL_CURSORB_PRECISION_32 : DDL_CURSORB_PRECISION_16;
+ planeb_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
+ DDL_PLANEB_PRECISION_32 : DDL_PLANEB_PRECISION_16;
+
+ I915_WRITE(VLV_DDL2, cursorb_prec |
+ (cursorb_dl << DDL_CURSORB_SHIFT) |
+ planeb_prec | planeb_dl);
+ }
+}
+
#define single_plane_enabled(mask) is_power_of_2(mask)
+static void valleyview_update_wm(struct drm_device *dev)
+{
+ static const int sr_latency_ns = 12000;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
+ int plane_sr, cursor_sr;
+ unsigned int enabled = 0;
+
+ vlv_update_drain_latency(dev);
+
+ if (g4x_compute_wm0(dev, 0,
+ &valleyview_wm_info, latency_ns,
+ &valleyview_cursor_wm_info, latency_ns,
+ &planea_wm, &cursora_wm))
+ enabled |= 1;
+
+ if (g4x_compute_wm0(dev, 1,
+ &valleyview_wm_info, latency_ns,
+ &valleyview_cursor_wm_info, latency_ns,
+ &planeb_wm, &cursorb_wm))
+ enabled |= 2;
+
+ plane_sr = cursor_sr = 0;
+ if (single_plane_enabled(enabled) &&
+ g4x_compute_srwm(dev, ffs(enabled) - 1,
+ sr_latency_ns,
+ &valleyview_wm_info,
+ &valleyview_cursor_wm_info,
+ &plane_sr, &cursor_sr))
+ I915_WRITE(FW_BLC_SELF_VLV, FW_CSPWRDWNEN);
+ else
+ I915_WRITE(FW_BLC_SELF_VLV,
+ I915_READ(FW_BLC_SELF_VLV) & ~FW_CSPWRDWNEN);
+
+ DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
+ planea_wm, cursora_wm,
+ planeb_wm, cursorb_wm,
+ plane_sr, cursor_sr);
+
+ I915_WRITE(DSPFW1,
+ (plane_sr << DSPFW_SR_SHIFT) |
+ (cursorb_wm << DSPFW_CURSORB_SHIFT) |
+ (planeb_wm << DSPFW_PLANEB_SHIFT) |
+ planea_wm);
+ I915_WRITE(DSPFW2,
+ (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
+ (cursora_wm << DSPFW_CURSORA_SHIFT));
+ I915_WRITE(DSPFW3,
+ (I915_READ(DSPFW3) | (cursor_sr << DSPFW_CURSOR_SR_SHIFT)));
+}
+
static void g4x_update_wm(struct drm_device *dev)
{
static const int sr_latency_ns = 12000;
}
}
+static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 temp, lvds_sync = 0;
+
+ temp = I915_READ(LVDS);
+ temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+ if (pipe == 1) {
+ temp |= LVDS_PIPEB_SELECT;
+ } else {
+ temp &= ~LVDS_PIPEB_SELECT;
+ }
+ /* set the corresponsding LVDS_BORDER bit */
+ temp |= dev_priv->lvds_border_bits;
+ /* Set the B0-B3 data pairs corresponding to whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock->p2 == 7)
+ temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more thoroughly into how
+ * panels behave in the two modes.
+ */
+ /* set the dithering flag on LVDS as needed */
+ if (INTEL_INFO(dev)->gen >= 4) {
+ if (dev_priv->lvds_dither)
+ temp |= LVDS_ENABLE_DITHER;
+ else
+ temp &= ~LVDS_ENABLE_DITHER;
+ }
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ lvds_sync |= LVDS_HSYNC_POLARITY;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ lvds_sync |= LVDS_VSYNC_POLARITY;
+ if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+ != lvds_sync) {
+ char flags[2] = "-+";
+ DRM_INFO("Changing LVDS panel from "
+ "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+ flags[!(temp & LVDS_HSYNC_POLARITY)],
+ flags[!(temp & LVDS_VSYNC_POLARITY)],
+ flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+ flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+ temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+ temp |= lvds_sync;
+ }
+ I915_WRITE(LVDS, temp);
+}
+
+static void i9xx_update_pll(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ intel_clock_t *clock, intel_clock_t *reduced_clock,
+ int num_connectors)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 dpll;
+ bool is_sdvo;
+
+ is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
+
+ dpll = DPLL_VGA_MODE_DIS;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+ if (is_sdvo) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+ if (pixel_multiplier > 1) {
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+ }
+ dpll |= DPLL_DVO_HIGH_SPEED;
+ }
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ dpll |= DPLL_DVO_HIGH_SPEED;
+
+ /* compute bitmask from p1 value */
+ if (IS_PINEVIEW(dev))
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+ else {
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (IS_G4X(dev) && reduced_clock)
+ dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+ }
+ switch (clock->p2) {
+ case 5:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+ break;
+ case 7:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+ break;
+ case 10:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+ break;
+ case 14:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+ break;
+ }
+ if (INTEL_INFO(dev)->gen >= 4)
+ dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+
+ if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+ dpll |= PLL_REF_INPUT_TVCLKINBC;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+ /* XXX: just matching BIOS for now */
+ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ dpll |= DPLL_VCO_ENABLE;
+ I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ intel_update_lvds(crtc, clock, adjusted_mode);
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
+
+ I915_WRITE(DPLL(pipe), dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+
+ if (INTEL_INFO(dev)->gen >= 4) {
+ u32 temp = 0;
+ if (is_sdvo) {
+ temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+ if (temp > 1)
+ temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+ else
+ temp = 0;
+ }
+ I915_WRITE(DPLL_MD(pipe), temp);
+ } else {
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(DPLL(pipe), dpll);
+ }
+}
+
+static void i8xx_update_pll(struct drm_crtc *crtc,
+ struct drm_display_mode *adjusted_mode,
+ intel_clock_t *clock,
+ int num_connectors)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 dpll;
+
+ dpll = DPLL_VGA_MODE_DIS;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ } else {
+ if (clock->p1 == 2)
+ dpll |= PLL_P1_DIVIDE_BY_TWO;
+ else
+ dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (clock->p2 == 4)
+ dpll |= PLL_P2_DIVIDE_BY_4;
+ }
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+ /* XXX: just matching BIOS for now */
+ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ dpll |= DPLL_VCO_ENABLE;
+ I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+
+ I915_WRITE(DPLL(pipe), dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ intel_update_lvds(crtc, clock, adjusted_mode);
+
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(DPLL(pipe), dpll);
+}
+
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dpll, dspcntr, pipeconf, vsyncshift;
- bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+ u32 dspcntr, pipeconf, vsyncshift;
+ bool ok, has_reduced_clock = false, is_sdvo = false;
+ bool is_lvds = false, is_tv = false, is_dp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
const intel_limit_t *limit;
int ret;
- u32 temp;
- u32 lvds_sync = 0;
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
if (encoder->base.crtc != crtc)
if (encoder->needs_tv_clock)
is_tv = true;
break;
- case INTEL_OUTPUT_DVO:
- is_dvo = true;
- break;
case INTEL_OUTPUT_TVOUT:
is_tv = true;
break;
- case INTEL_OUTPUT_ANALOG:
- is_crt = true;
- break;
case INTEL_OUTPUT_DISPLAYPORT:
is_dp = true;
break;
i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
&reduced_clock : NULL);
- dpll = DPLL_VGA_MODE_DIS;
-
- if (!IS_GEN2(dev)) {
- if (is_lvds)
- dpll |= DPLLB_MODE_LVDS;
- else
- dpll |= DPLLB_MODE_DAC_SERIAL;
- if (is_sdvo) {
- int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (pixel_multiplier > 1) {
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
- }
- dpll |= DPLL_DVO_HIGH_SPEED;
- }
- if (is_dp)
- dpll |= DPLL_DVO_HIGH_SPEED;
-
- /* compute bitmask from p1 value */
- if (IS_PINEVIEW(dev))
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
- else {
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- if (IS_G4X(dev) && has_reduced_clock)
- dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
- }
- switch (clock.p2) {
- case 5:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
- break;
- case 7:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
- break;
- case 10:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
- break;
- case 14:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
- break;
- }
- if (INTEL_INFO(dev)->gen >= 4)
- dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
- } else {
- if (is_lvds) {
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- } else {
- if (clock.p1 == 2)
- dpll |= PLL_P1_DIVIDE_BY_TWO;
- else
- dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- if (clock.p2 == 4)
- dpll |= PLL_P2_DIVIDE_BY_4;
- }
- }
-
- if (is_sdvo && is_tv)
- dpll |= PLL_REF_INPUT_TVCLKINBC;
- else if (is_tv)
- /* XXX: just matching BIOS for now */
- /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
- dpll |= 3;
- else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
- dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ if (IS_GEN2(dev))
+ i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors);
else
- dpll |= PLL_REF_INPUT_DREFCLK;
+ i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
+ has_reduced_clock ? &reduced_clock : NULL,
+ num_connectors);
/* setup pipeconf */
pipeconf = I915_READ(PIPECONF(pipe));
}
}
- dpll |= DPLL_VCO_ENABLE;
-
DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
drm_mode_debug_printmodeline(mode);
- I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
-
- POSTING_READ(DPLL(pipe));
- udelay(150);
-
- /* The LVDS pin pair needs to be on before the DPLLs are enabled.
- * This is an exception to the general rule that mode_set doesn't turn
- * things on.
- */
- if (is_lvds) {
- temp = I915_READ(LVDS);
- temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- if (pipe == 1) {
- temp |= LVDS_PIPEB_SELECT;
- } else {
- temp &= ~LVDS_PIPEB_SELECT;
- }
- /* set the corresponsding LVDS_BORDER bit */
- temp |= dev_priv->lvds_border_bits;
- /* Set the B0-B3 data pairs corresponding to whether we're going to
- * set the DPLLs for dual-channel mode or not.
- */
- if (clock.p2 == 7)
- temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
- else
- temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
- /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
- * appropriately here, but we need to look more thoroughly into how
- * panels behave in the two modes.
- */
- /* set the dithering flag on LVDS as needed */
- if (INTEL_INFO(dev)->gen >= 4) {
- if (dev_priv->lvds_dither)
- temp |= LVDS_ENABLE_DITHER;
- else
- temp &= ~LVDS_ENABLE_DITHER;
- }
- if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
- lvds_sync |= LVDS_HSYNC_POLARITY;
- if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
- lvds_sync |= LVDS_VSYNC_POLARITY;
- if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
- != lvds_sync) {
- char flags[2] = "-+";
- DRM_INFO("Changing LVDS panel from "
- "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
- flags[!(temp & LVDS_HSYNC_POLARITY)],
- flags[!(temp & LVDS_VSYNC_POLARITY)],
- flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
- flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
- temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
- temp |= lvds_sync;
- }
- I915_WRITE(LVDS, temp);
- }
-
- if (is_dp) {
- intel_dp_set_m_n(crtc, mode, adjusted_mode);
- }
-
- I915_WRITE(DPLL(pipe), dpll);
-
- /* Wait for the clocks to stabilize. */
- POSTING_READ(DPLL(pipe));
- udelay(150);
-
- if (INTEL_INFO(dev)->gen >= 4) {
- temp = 0;
- if (is_sdvo) {
- temp = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (temp > 1)
- temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- else
- temp = 0;
- }
- I915_WRITE(DPLL_MD(pipe), temp);
- } else {
- /* The pixel multiplier can only be updated once the
- * DPLL is enabled and the clocks are stable.
- *
- * So write it again.
- */
- I915_WRITE(DPLL(pipe), dpll);
- }
-
if (HAS_PIPE_CXSR(dev)) {
if (intel_crtc->lowfreq_avail) {
DRM_DEBUG_KMS("enabling CxSR downclocking\n");
if (I915_READ(HDMIB) & PORT_DETECTED) {
/* PCH SDVOB multiplex with HDMIB */
- found = intel_sdvo_init(dev, PCH_SDVOB);
+ found = intel_sdvo_init(dev, PCH_SDVOB, true);
if (!found)
intel_hdmi_init(dev, HDMIB);
if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
if (I915_READ(SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOB\n");
- found = intel_sdvo_init(dev, SDVOB);
+ found = intel_sdvo_init(dev, SDVOB, true);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
intel_hdmi_init(dev, SDVOB);
if (I915_READ(SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOC\n");
- found = intel_sdvo_init(dev, SDVOC);
+ found = intel_sdvo_init(dev, SDVOC, false);
}
if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
}
}
+static void valleyview_init_clock_gating(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe;
+ uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+ I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
+
+ I915_WRITE(WM3_LP_ILK, 0);
+ I915_WRITE(WM2_LP_ILK, 0);
+ I915_WRITE(WM1_LP_ILK, 0);
+
+ /* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+ * This implements the WaDisableRCZUnitClockGating workaround.
+ */
+ I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
+ I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
+
+ I915_WRITE(IVB_CHICKEN3,
+ CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
+ CHICKEN3_DGMG_DONE_FIX_DISABLE);
+
+ /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+ GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+ /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+ I915_WRITE(GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL);
+ I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE);
+
+ /* This is required by WaCatErrorRejectionIssue */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
+ for_each_pipe(pipe) {
+ I915_WRITE(DSPCNTR(pipe),
+ I915_READ(DSPCNTR(pipe)) |
+ DISPPLANE_TRICKLE_FEED_DISABLE);
+ intel_flush_display_plane(dev_priv, pipe);
+ }
+
+ I915_WRITE(CACHE_MODE_1, I915_READ(CACHE_MODE_1) |
+ (PIXEL_SUBSPAN_COLLECT_OPT_DISABLE << 16) |
+ PIXEL_SUBSPAN_COLLECT_OPT_DISABLE);
+}
+
static void g4x_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
}
/* Returns the core display clock speed */
- if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
+ if (IS_VALLEYVIEW(dev))
+ dev_priv->display.get_display_clock_speed =
+ valleyview_get_display_clock_speed;
+ else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
dev_priv->display.get_display_clock_speed =
i945_get_display_clock_speed;
else if (IS_I915G(dev))
dev_priv->display.write_eld = ironlake_write_eld;
} else
dev_priv->display.update_wm = NULL;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->display.update_wm = valleyview_update_wm;
+ dev_priv->display.init_clock_gating =
+ valleyview_init_clock_gating;
+ dev_priv->display.force_wake_get = vlv_force_wake_get;
+ dev_priv->display.force_wake_put = vlv_force_wake_put;
} else if (IS_PINEVIEW(dev)) {
if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
dev_priv->is_ddr3,
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->quirks |= QUIRK_PIPEA_FORCE;
- DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
+ DRM_INFO("applying pipe a force quirk\n");
}
/*
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
+ DRM_INFO("applying lvds SSC disable quirk\n");
+}
+
+/*
+ * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
+ * brightness value
+ */
+static void quirk_invert_brightness(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
+ DRM_INFO("applying inverted panel brightness quirk\n");
}
struct intel_quirk {
/* Sony Vaio Y cannot use SSC on LVDS */
{ 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
+
+ /* Acer Aspire 5734Z must invert backlight brightness */
+ { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
};
static void intel_init_quirks(struct drm_device *dev)
if (IS_IRONLAKE_M(dev))
ironlake_disable_rc6(dev);
+ if (IS_VALLEYVIEW(dev))
+ vlv_init_dpio(dev);
+
mutex_unlock(&dev->struct_mutex);
/* Disable the irq before mode object teardown, for the irq might
git.openpandora.org / pandora-kernel.git / blobdiff