*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
struct drm_i915_private *dev_priv = dev->dev_private;
u32 temp, reg;
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
reg = PCH_ADPA;
else
reg = ADPA;
else
dpll_md_reg = DPLL_B_MD;
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
adpa_reg = PCH_ADPA;
else
adpa_reg = ADPA;
* Disable separate mode multiplier used when cloning SDVO to CRT
* XXX this needs to be adjusted when we really are cloning
*/
- if (IS_I965G(dev) && !IS_IRONLAKE(dev)) {
+ if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) {
dpll_md = I915_READ(dpll_md_reg);
I915_WRITE(dpll_md_reg,
dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
if (intel_crtc->pipe == 0) {
adpa |= ADPA_PIPE_A_SELECT;
- if (!IS_IRONLAKE(dev))
+ if (!HAS_PCH_SPLIT(dev))
I915_WRITE(BCLRPAT_A, 0);
} else {
adpa |= ADPA_PIPE_B_SELECT;
- if (!IS_IRONLAKE(dev))
+ if (!HAS_PCH_SPLIT(dev))
I915_WRITE(BCLRPAT_B, 0);
}
u32 hotplug_en;
int i, tries = 0;
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
return intel_ironlake_crt_detect_hotplug(connector);
/*
static bool intel_crt_detect_ddc(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
/* CRT should always be at 0, but check anyway */
- if (intel_output->type != INTEL_OUTPUT_ANALOG)
+ if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
return false;
- return intel_ddc_probe(intel_output);
+ return intel_ddc_probe(intel_encoder);
}
static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
{
- struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
- struct intel_output *intel_output = to_intel_output(connector);
- struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_crtc *crtc;
int dpms_mode;
enum drm_connector_status status;
/* for pre-945g platforms use load detect */
if (encoder->crtc && encoder->crtc->enabled) {
- status = intel_crt_load_detect(encoder->crtc, intel_output);
+ status = intel_crt_load_detect(encoder->crtc, intel_encoder);
} else {
- crtc = intel_get_load_detect_pipe(intel_output,
+ crtc = intel_get_load_detect_pipe(intel_encoder,
NULL, &dpms_mode);
if (crtc) {
- status = intel_crt_load_detect(crtc, intel_output);
- intel_release_load_detect_pipe(intel_output, dpms_mode);
+ status = intel_crt_load_detect(crtc, intel_encoder);
+ intel_release_load_detect_pipe(intel_encoder, dpms_mode);
} else
status = connector_status_unknown;
}
static void intel_crt_destroy(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
- intel_i2c_destroy(intel_output->ddc_bus);
+ intel_i2c_destroy(intel_encoder->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
static int intel_crt_get_modes(struct drm_connector *connector)
{
int ret;
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
struct i2c_adapter *ddcbus;
struct drm_device *dev = connector->dev;
- ret = intel_ddc_get_modes(intel_output);
+ ret = intel_ddc_get_modes(intel_encoder);
if (ret || !IS_G4X(dev))
goto end;
- ddcbus = intel_output->ddc_bus;
+ ddcbus = intel_encoder->ddc_bus;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
- intel_output->ddc_bus =
+ intel_encoder->ddc_bus =
intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
- if (!intel_output->ddc_bus) {
- intel_output->ddc_bus = ddcbus;
+ if (!intel_encoder->ddc_bus) {
+ intel_encoder->ddc_bus = ddcbus;
dev_printk(KERN_ERR, &connector->dev->pdev->dev,
"DDC bus registration failed for CRTDDC_D.\n");
goto end;
}
/* Try to get modes by GPIOD port */
- ret = intel_ddc_get_modes(intel_output);
+ ret = intel_ddc_get_modes(intel_encoder);
intel_i2c_destroy(ddcbus);
end:
void intel_crt_init(struct drm_device *dev)
{
struct drm_connector *connector;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 i2c_reg;
- intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
- if (!intel_output)
+ intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
+ if (!intel_encoder)
return;
- connector = &intel_output->base;
- drm_connector_init(dev, &intel_output->base,
+ connector = &intel_encoder->base;
+ drm_connector_init(dev, &intel_encoder->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
- drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
+ drm_encoder_init(dev, &intel_encoder->enc, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC);
- drm_mode_connector_attach_encoder(&intel_output->base,
- &intel_output->enc);
+ drm_mode_connector_attach_encoder(&intel_encoder->base,
+ &intel_encoder->enc);
/* Set up the DDC bus. */
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
i2c_reg = PCH_GPIOA;
else {
i2c_reg = GPIOA;
if (dev_priv->crt_ddc_bus != 0)
i2c_reg = dev_priv->crt_ddc_bus;
}
- intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
- if (!intel_output->ddc_bus) {
+ intel_encoder->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
+ if (!intel_encoder->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
return;
}
- intel_output->type = INTEL_OUTPUT_ANALOG;
- intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ intel_encoder->type = INTEL_OUTPUT_ANALOG;
+ intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT) |
(1 << INTEL_SDVO_LVDS_CLONE_BIT);
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
- drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
+ drm_encoder_helper_add(&intel_encoder->enc, &intel_crt_helper_funcs);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
git.openpandora.org / pandora-kernel.git / blobdiff