#define I915_DEBUG_INTERRUPT (1<<2)
#define I915_USER_INTERRUPT (1<<1)
#define I915_ASLE_INTERRUPT (1<<0)
+#define I915_BSD_USER_INTERRUPT (1<<25)
#define EIR 0x020b0
#define EMR 0x020b4
#define ESR 0x020b8
#define BB_ADDR 0x02140 /* 8 bytes */
#define GFX_FLSH_CNTL 0x02170 /* 915+ only */
+/* GEN6 interrupt control */
+#define GEN6_RENDER_HWSTAM 0x2098
+#define GEN6_RENDER_IMR 0x20a8
+#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
+#define GEN6_RENDER_PPGTT_PAGE_FAULT (1 << 7)
+#define GEN6_RENDER TIMEOUT_COUNTER_EXPIRED (1 << 6)
+#define GEN6_RENDER_L3_PARITY_ERROR (1 << 5)
+#define GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 4)
+#define GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR (1 << 3)
+#define GEN6_RENDER_SYNC_STATUS (1 << 2)
+#define GEN6_RENDER_DEBUG_INTERRUPT (1 << 1)
+#define GEN6_RENDER_USER_INTERRUPT (1 << 0)
+
+#define GEN6_BLITTER_HWSTAM 0x22098
+#define GEN6_BLITTER_IMR 0x220a8
+#define GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT (1 << 26)
+#define GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR (1 << 25)
+#define GEN6_BLITTER_SYNC_STATUS (1 << 24)
+#define GEN6_BLITTER_USER_INTERRUPT (1 << 22)
+/*
+ * BSD (bit stream decoder instruction and interrupt control register defines
+ * (G4X and Ironlake only)
+ */
+
+#define BSD_RING_TAIL 0x04030
+#define BSD_RING_HEAD 0x04034
+#define BSD_RING_START 0x04038
+#define BSD_RING_CTL 0x0403c
+#define BSD_RING_ACTHD 0x04074
+#define BSD_HWS_PGA 0x04080
/*
* Framebuffer compression (915+ only)
#define DCC_CHANNEL_XOR_DISABLE (1 << 10)
#define DCC_CHANNEL_XOR_BIT_17 (1 << 9)
+/** Pineview MCH register contains DDR3 setting */
+#define CSHRDDR3CTL 0x101a8
+#define CSHRDDR3CTL_DDR3 (1 << 2)
+
/** 965 MCH register controlling DRAM channel configuration */
#define C0DRB3 0x10206
#define C1DRB3 0x10606
#define CLKCFG_MEM_800 (3 << 4)
#define CLKCFG_MEM_MASK (7 << 4)
+#define TR1 0x11006
+#define TSFS 0x11020
+#define TSFS_SLOPE_MASK 0x0000ff00
+#define TSFS_SLOPE_SHIFT 8
+#define TSFS_INTR_MASK 0x000000ff
+
#define CRSTANDVID 0x11100
#define PXVFREQ_BASE 0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */
#define PXVFREQ_PX_MASK 0x7f000000
#define MEMSTAT_SRC_CTL_STDBY 3
#define RCPREVBSYTUPAVG 0x113b8
#define RCPREVBSYTDNAVG 0x113bc
+#define SDEW 0x1124c
+#define CSIEW0 0x11250
+#define CSIEW1 0x11254
+#define CSIEW2 0x11258
+#define PEW 0x1125c
+#define DEW 0x11270
+#define MCHAFE 0x112c0
+#define CSIEC 0x112e0
+#define DMIEC 0x112e4
+#define DDREC 0x112e8
+#define PEG0EC 0x112ec
+#define PEG1EC 0x112f0
+#define GFXEC 0x112f4
+#define RPPREVBSYTUPAVG 0x113b8
+#define RPPREVBSYTDNAVG 0x113bc
+#define ECR 0x11600
+#define ECR_GPFE (1<<31)
+#define ECR_IMONE (1<<30)
+#define ECR_CAP_MASK 0x0000001f /* Event range, 0-31 */
+#define OGW0 0x11608
+#define OGW1 0x1160c
+#define EG0 0x11610
+#define EG1 0x11614
+#define EG2 0x11618
+#define EG3 0x1161c
+#define EG4 0x11620
+#define EG5 0x11624
+#define EG6 0x11628
+#define EG7 0x1162c
+#define PXW 0x11664
+#define PXWL 0x11680
+#define LCFUSE02 0x116c0
+#define LCFUSE_HIV_MASK 0x000000ff
+#define CSIPLL0 0x12c10
+#define DDRMPLL1 0X12c20
#define PEG_BAND_GAP_DATA 0x14d68
/*
#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2)
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
#define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */
-#define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f
#define PORT_HOTPLUG_STAT 0x61114
#define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
#define DP_LINK_TRAIN_MASK (3 << 28)
#define DP_LINK_TRAIN_SHIFT 28
+/* CPT Link training mode */
+#define DP_LINK_TRAIN_PAT_1_CPT (0 << 8)
+#define DP_LINK_TRAIN_PAT_2_CPT (1 << 8)
+#define DP_LINK_TRAIN_PAT_IDLE_CPT (2 << 8)
+#define DP_LINK_TRAIN_OFF_CPT (3 << 8)
+#define DP_LINK_TRAIN_MASK_CPT (7 << 8)
+#define DP_LINK_TRAIN_SHIFT_CPT 8
+
/* Signal voltages. These are mostly controlled by the other end */
#define DP_VOLTAGE_0_4 (0 << 25)
#define DP_VOLTAGE_0_6 (1 << 25)
/* Display & cursor control */
/* dithering flag on Ironlake */
-#define PIPE_ENABLE_DITHER (1 << 4)
+#define PIPE_ENABLE_DITHER (1 << 4)
+#define PIPE_DITHER_TYPE_MASK (3 << 2)
+#define PIPE_DITHER_TYPE_SPATIAL (0 << 2)
+#define PIPE_DITHER_TYPE_ST01 (1 << 2)
/* Pipe A */
#define PIPEADSL 0x70000
#define PIPEACONF 0x70008
#define DSPFW1 0x70034
#define DSPFW_SR_SHIFT 23
+#define DSPFW_SR_MASK (0x1ff<<23)
#define DSPFW_CURSORB_SHIFT 16
+#define DSPFW_CURSORB_MASK (0x3f<<16)
#define DSPFW_PLANEB_SHIFT 8
+#define DSPFW_PLANEB_MASK (0x7f<<8)
+#define DSPFW_PLANEA_MASK (0x7f)
#define DSPFW2 0x70038
#define DSPFW_CURSORA_MASK 0x00003f00
#define DSPFW_CURSORA_SHIFT 8
+#define DSPFW_PLANEC_MASK (0x7f)
#define DSPFW3 0x7003c
#define DSPFW_HPLL_SR_EN (1<<31)
#define DSPFW_CURSOR_SR_SHIFT 24
#define PINEVIEW_SELF_REFRESH_EN (1<<30)
+#define DSPFW_CURSOR_SR_MASK (0x3f<<24)
+#define DSPFW_HPLL_CURSOR_SHIFT 16
+#define DSPFW_HPLL_CURSOR_MASK (0x3f<<16)
+#define DSPFW_HPLL_SR_MASK (0x1ff)
/* FIFO watermark sizes etc */
#define G4X_FIFO_LINE_SIZE 64
#define PINEVIEW_CURSOR_DFT_WM 0
#define PINEVIEW_CURSOR_GUARD_WM 5
+
+/* define the Watermark register on Ironlake */
+#define WM0_PIPEA_ILK 0x45100
+#define WM0_PIPE_PLANE_MASK (0x7f<<16)
+#define WM0_PIPE_PLANE_SHIFT 16
+#define WM0_PIPE_SPRITE_MASK (0x3f<<8)
+#define WM0_PIPE_SPRITE_SHIFT 8
+#define WM0_PIPE_CURSOR_MASK (0x1f)
+
+#define WM0_PIPEB_ILK 0x45104
+#define WM1_LP_ILK 0x45108
+#define WM1_LP_SR_EN (1<<31)
+#define WM1_LP_LATENCY_SHIFT 24
+#define WM1_LP_LATENCY_MASK (0x7f<<24)
+#define WM1_LP_SR_MASK (0x1ff<<8)
+#define WM1_LP_SR_SHIFT 8
+#define WM1_LP_CURSOR_MASK (0x3f)
+
+/* Memory latency timer register */
+#define MLTR_ILK 0x11222
+/* the unit of memory self-refresh latency time is 0.5us */
+#define ILK_SRLT_MASK 0x3f
+
+/* define the fifo size on Ironlake */
+#define ILK_DISPLAY_FIFO 128
+#define ILK_DISPLAY_MAXWM 64
+#define ILK_DISPLAY_DFTWM 8
+
+#define ILK_DISPLAY_SR_FIFO 512
+#define ILK_DISPLAY_MAX_SRWM 0x1ff
+#define ILK_DISPLAY_DFT_SRWM 0x3f
+#define ILK_CURSOR_SR_FIFO 64
+#define ILK_CURSOR_MAX_SRWM 0x3f
+#define ILK_CURSOR_DFT_SRWM 8
+
+#define ILK_FIFO_LINE_SIZE 64
+
/*
* The two pipe frame counter registers are not synchronized, so
* reading a stable value is somewhat tricky. The following code
#define GT_PIPE_NOTIFY (1 << 4)
#define GT_SYNC_STATUS (1 << 2)
#define GT_USER_INTERRUPT (1 << 0)
+#define GT_BSD_USER_INTERRUPT (1 << 5)
+
#define GTISR 0x44010
#define GTIMR 0x44014
#define GTIIR 0x44018
#define GTIER 0x4401c
+#define ILK_DISPLAY_CHICKEN2 0x42004
+#define ILK_DPARB_GATE (1<<22)
+#define ILK_VSDPFD_FULL (1<<21)
+#define ILK_DSPCLK_GATE 0x42020
+#define ILK_DPARB_CLK_GATE (1<<5)
+
#define DISP_ARB_CTL 0x45000
#define DISP_TILE_SURFACE_SWIZZLING (1<<13)
+#define DISP_FBC_WM_DIS (1<<15)
/* PCH */
#define SDE_PORTB_HOTPLUG (1 << 8)
#define SDE_SDVOB_HOTPLUG (1 << 6)
#define SDE_HOTPLUG_MASK (0xf << 8)
+/* CPT */
+#define SDE_CRT_HOTPLUG_CPT (1 << 19)
+#define SDE_PORTD_HOTPLUG_CPT (1 << 23)
+#define SDE_PORTC_HOTPLUG_CPT (1 << 22)
+#define SDE_PORTB_HOTPLUG_CPT (1 << 21)
#define SDEISR 0xc4000
#define SDEIMR 0xc4004
#define PCH_SSC4_PARMS 0xc6210
#define PCH_SSC4_AUX_PARMS 0xc6214
+#define PCH_DPLL_SEL 0xc7000
+#define TRANSA_DPLL_ENABLE (1<<3)
+#define TRANSA_DPLLB_SEL (1<<0)
+#define TRANSA_DPLLA_SEL 0
+#define TRANSB_DPLL_ENABLE (1<<7)
+#define TRANSB_DPLLB_SEL (1<<4)
+#define TRANSB_DPLLA_SEL (0)
+#define TRANSC_DPLL_ENABLE (1<<11)
+#define TRANSC_DPLLB_SEL (1<<8)
+#define TRANSC_DPLLA_SEL (0)
+
/* transcoder */
#define TRANS_HTOTAL_A 0xe0000
#define FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22)
#define FDI_LINK_TRAIN_PRE_EMPHASIS_2X (2<<22)
#define FDI_LINK_TRAIN_PRE_EMPHASIS_3X (3<<22)
+/* ILK always use 400mV 0dB for voltage swing and pre-emphasis level.
+ SNB has different settings. */
+/* SNB A-stepping */
+#define FDI_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22)
+#define FDI_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22)
+#define FDI_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22)
+#define FDI_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22)
+/* SNB B-stepping */
+#define FDI_LINK_TRAIN_400MV_0DB_SNB_B (0x0<<22)
+#define FDI_LINK_TRAIN_400MV_6DB_SNB_B (0x3a<<22)
+#define FDI_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22)
+#define FDI_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22)
+#define FDI_LINK_TRAIN_VOL_EMP_MASK (0x3f<<22)
#define FDI_DP_PORT_WIDTH_X1 (0<<19)
#define FDI_DP_PORT_WIDTH_X2 (1<<19)
#define FDI_DP_PORT_WIDTH_X3 (2<<19)
#define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6)
#define FDI_SEL_RAWCLK (0<<4)
#define FDI_SEL_PCDCLK (1<<4)
+/* CPT */
+#define FDI_AUTO_TRAINING (1<<10)
+#define FDI_LINK_TRAIN_PATTERN_1_CPT (0<<8)
+#define FDI_LINK_TRAIN_PATTERN_2_CPT (1<<8)
+#define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8)
+#define FDI_LINK_TRAIN_NORMAL_CPT (3<<8)
+#define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8)
#define FDI_RXA_MISC 0xf0010
#define FDI_RXB_MISC 0xf1010
#define SDVO_ENCODING (0)
#define TMDS_ENCODING (2 << 10)
#define NULL_PACKET_VSYNC_ENABLE (1 << 9)
+/* CPT */
+#define HDMI_MODE_SELECT (1 << 9)
+#define DVI_MODE_SELECT (0)
#define SDVOB_BORDER_ENABLE (1 << 7)
#define AUDIO_ENABLE (1 << 6)
#define VSYNC_ACTIVE_HIGH (1 << 4)
#define HSYNC_ACTIVE_HIGH (1 << 3)
#define PORT_DETECTED (1 << 2)
+/* PCH SDVOB multiplex with HDMIB */
+#define PCH_SDVOB HDMIB
+
#define HDMIC 0xe1150
#define HDMID 0xe1160
#define PCH_DPD_AUX_CH_DATA4 0xe4320
#define PCH_DPD_AUX_CH_DATA5 0xe4324
+/* CPT */
+#define PORT_TRANS_A_SEL_CPT 0
+#define PORT_TRANS_B_SEL_CPT (1<<29)
+#define PORT_TRANS_C_SEL_CPT (2<<29)
+#define PORT_TRANS_SEL_MASK (3<<29)
+
+#define TRANS_DP_CTL_A 0xe0300
+#define TRANS_DP_CTL_B 0xe1300
+#define TRANS_DP_CTL_C 0xe2300
+#define TRANS_DP_OUTPUT_ENABLE (1<<31)
+#define TRANS_DP_PORT_SEL_B (0<<29)
+#define TRANS_DP_PORT_SEL_C (1<<29)
+#define TRANS_DP_PORT_SEL_D (2<<29)
+#define TRANS_DP_PORT_SEL_MASK (3<<29)
+#define TRANS_DP_AUDIO_ONLY (1<<26)
+#define TRANS_DP_ENH_FRAMING (1<<18)
+#define TRANS_DP_8BPC (0<<9)
+#define TRANS_DP_10BPC (1<<9)
+#define TRANS_DP_6BPC (2<<9)
+#define TRANS_DP_12BPC (3<<9)
+#define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4)
+#define TRANS_DP_VSYNC_ACTIVE_LOW 0
+#define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3)
+#define TRANS_DP_HSYNC_ACTIVE_LOW 0
+
+/* SNB eDP training params */
+/* SNB A-stepping */
+#define EDP_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22)
+#define EDP_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22)
+#define EDP_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22)
+#define EDP_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22)
+/* SNB B-stepping */
+#define EDP_LINK_TRAIN_400MV_0DB_SNB_B (0x0<<22)
+#define EDP_LINK_TRAIN_400MV_6DB_SNB_B (0x3a<<22)
+#define EDP_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22)
+#define EDP_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22)
+#define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22)
+
#endif /* _I915_REG_H_ */
git.openpandora.org / pandora-kernel.git / blobdiff