drm_mode->clock -= drm_mode->clock % CVT_CLOCK_STEP;
/* 18/16. Find actual vertical frame frequency */
/* ignore - just set the mode flag for interlaced */
- if (interlaced)
+ if (interlaced) {
drm_mode->vtotal *= 2;
+ drm_mode->flags |= DRM_MODE_FLAG_INTERLACE;
+ }
/* Fill the mode line name */
drm_mode_set_name(drm_mode);
if (reduced)
else
drm_mode->flags |= (DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_NHSYNC);
- if (interlaced)
- drm_mode->flags |= DRM_MODE_FLAG_INTERLACE;
- return drm_mode;
+ return drm_mode;
}
EXPORT_SYMBOL(drm_cvt_mode);
/**
- * drm_gtf_mode - create the modeline based on GTF algorithm
+ * drm_gtf_mode_complex - create the modeline based on full GTF algorithm
*
* @dev :drm device
* @hdisplay :hdisplay size
* @vdisplay :vdisplay size
* @vrefresh :vrefresh rate.
* @interlaced :whether the interlace is supported
- * @margins :whether the margin is supported
+ * @margins :desired margin size
+ * @GTF_[MCKJ] :extended GTF formula parameters
*
* LOCKING.
* none.
*
- * return the modeline based on GTF algorithm
- *
- * This function is to create the modeline based on the GTF algorithm.
- * Generalized Timing Formula is derived from:
- * GTF Spreadsheet by Andy Morrish (1/5/97)
- * available at http://www.vesa.org
+ * return the modeline based on full GTF algorithm.
*
- * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c.
- * What I have done is to translate it by using integer calculation.
- * I also refer to the function of fb_get_mode in the file of
- * drivers/video/fbmon.c
+ * GTF feature blocks specify C and J in multiples of 0.5, so we pass them
+ * in here multiplied by two. For a C of 40, pass in 80.
*/
-struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay,
- int vdisplay, int vrefresh,
- bool interlaced, int margins)
-{
- /* 1) top/bottom margin size (% of height) - default: 1.8, */
+struct drm_display_mode *
+drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay,
+ int vrefresh, bool interlaced, int margins,
+ int GTF_M, int GTF_2C, int GTF_K, int GTF_2J)
+{ /* 1) top/bottom margin size (% of height) - default: 1.8, */
#define GTF_MARGIN_PERCENTAGE 18
/* 2) character cell horizontal granularity (pixels) - default 8 */
#define GTF_CELL_GRAN 8
#define H_SYNC_PERCENT 8
/* min time of vsync + back porch (microsec) */
#define MIN_VSYNC_PLUS_BP 550
- /* blanking formula gradient */
-#define GTF_M 600
- /* blanking formula offset */
-#define GTF_C 40
- /* blanking formula scaling factor */
-#define GTF_K 128
- /* blanking formula scaling factor */
-#define GTF_J 20
/* C' and M' are part of the Blanking Duty Cycle computation */
-#define GTF_C_PRIME (((GTF_C - GTF_J) * GTF_K / 256) + GTF_J)
-#define GTF_M_PRIME (GTF_K * GTF_M / 256)
+#define GTF_C_PRIME ((((GTF_2C - GTF_2J) * GTF_K / 256) + GTF_2J) / 2)
+#define GTF_M_PRIME (GTF_K * GTF_M / 256)
struct drm_display_mode *drm_mode;
unsigned int hdisplay_rnd, vdisplay_rnd, vfieldrate_rqd;
int top_margin, bottom_margin;
drm_mode->clock = pixel_freq;
- drm_mode_set_name(drm_mode);
- drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC;
-
if (interlaced) {
drm_mode->vtotal *= 2;
drm_mode->flags |= DRM_MODE_FLAG_INTERLACE;
}
+ drm_mode_set_name(drm_mode);
+ if (GTF_M == 600 && GTF_2C == 80 && GTF_K == 128 && GTF_2J == 40)
+ drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC;
+ else
+ drm_mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC;
+
return drm_mode;
}
+EXPORT_SYMBOL(drm_gtf_mode_complex);
+
+/**
+ * drm_gtf_mode - create the modeline based on GTF algorithm
+ *
+ * @dev :drm device
+ * @hdisplay :hdisplay size
+ * @vdisplay :vdisplay size
+ * @vrefresh :vrefresh rate.
+ * @interlaced :whether the interlace is supported
+ * @margins :whether the margin is supported
+ *
+ * LOCKING.
+ * none.
+ *
+ * return the modeline based on GTF algorithm
+ *
+ * This function is to create the modeline based on the GTF algorithm.
+ * Generalized Timing Formula is derived from:
+ * GTF Spreadsheet by Andy Morrish (1/5/97)
+ * available at http://www.vesa.org
+ *
+ * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c.
+ * What I have done is to translate it by using integer calculation.
+ * I also refer to the function of fb_get_mode in the file of
+ * drivers/video/fbmon.c
+ *
+ * Standard GTF parameters:
+ * M = 600
+ * C = 40
+ * K = 128
+ * J = 20
+ */
+struct drm_display_mode *
+drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
+ bool lace, int margins)
+{
+ return drm_gtf_mode_complex(dev, hdisplay, vdisplay, vrefresh, lace,
+ margins, 600, 40 * 2, 128, 20 * 2);
+}
EXPORT_SYMBOL(drm_gtf_mode);
+
/**
* drm_mode_set_name - set the name on a mode
* @mode: name will be set in this mode
*/
void drm_mode_set_name(struct drm_display_mode *mode)
{
- snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d", mode->hdisplay,
- mode->vdisplay);
+ bool interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+ snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d%s",
+ mode->hdisplay, mode->vdisplay,
+ interlaced ? "i" : "");
}
EXPORT_SYMBOL(drm_mode_set_name);
git.openpandora.org / pandora-kernel.git / blobdiff