#include <linux/slab.h>
#include "edac_mc.h"
+#define I82860_REVISION " Ver: 2.0.0 " __DATE__
+
#define i82860_printk(level, fmt, arg...) \
edac_printk(level, "i82860", fmt, ##arg)
static void i82860_get_error_info(struct mem_ctl_info *mci,
struct i82860_error_info *info)
{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
/*
* This is a mess because there is no atomic way to read all the
* registers at once and the registers can transition from CE being
* overwritten by UE.
*/
- pci_read_config_word(mci->pdev, I82860_ERRSTS, &info->errsts);
- pci_read_config_dword(mci->pdev, I82860_EAP, &info->eap);
- pci_read_config_word(mci->pdev, I82860_DERRCTL_STS, &info->derrsyn);
- pci_read_config_word(mci->pdev, I82860_ERRSTS, &info->errsts2);
+ pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts);
+ pci_read_config_dword(pdev, I82860_EAP, &info->eap);
+ pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
+ pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts2);
- pci_write_bits16(mci->pdev, I82860_ERRSTS, 0x0003, 0x0003);
+ pci_write_bits16(pdev, I82860_ERRSTS, 0x0003, 0x0003);
/*
* If the error is the same for both reads then the first set of reads
return;
if ((info->errsts ^ info->errsts2) & 0x0003) {
- pci_read_config_dword(mci->pdev, I82860_EAP, &info->eap);
- pci_read_config_word(mci->pdev, I82860_DERRCTL_STS,
+ pci_read_config_dword(pdev, I82860_EAP, &info->eap);
+ pci_read_config_word(pdev, I82860_DERRCTL_STS,
&info->derrsyn);
}
}
i82860_process_error_info(mci, &info, 1);
}
-static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
+static void i82860_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev)
{
- int rc = -ENODEV;
- int index;
- struct mem_ctl_info *mci = NULL;
unsigned long last_cumul_size;
- struct i82860_error_info discard;
+ u16 mchcfg_ddim; /* DRAM Data Integrity Mode 0=none, 2=edac */
+ u16 value;
+ u32 cumul_size;
+ struct csrow_info *csrow;
+ int index;
+
+ pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
+ mchcfg_ddim = mchcfg_ddim & 0x180;
+ last_cumul_size = 0;
+
+ /* The group row boundary (GRA) reg values are boundary address
+ * for each DRAM row with a granularity of 16MB. GRA regs are
+ * cumulative; therefore GRA15 will contain the total memory contained
+ * in all eight rows.
+ */
+ for (index = 0; index < mci->nr_csrows; index++) {
+ csrow = &mci->csrows[index];
+ pci_read_config_word(pdev, I82860_GBA + index * 2, &value);
+ cumul_size = (value & I82860_GBA_MASK) <<
+ (I82860_GBA_SHIFT - PAGE_SHIFT);
+ debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+ cumul_size);
- u16 mchcfg_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
+ if (cumul_size == last_cumul_size)
+ continue; /* not populated */
+
+ csrow->first_page = last_cumul_size;
+ csrow->last_page = cumul_size - 1;
+ csrow->nr_pages = cumul_size - last_cumul_size;
+ last_cumul_size = cumul_size;
+ csrow->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */
+ csrow->mtype = MEM_RMBS;
+ csrow->dtype = DEV_UNKNOWN;
+ csrow->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
+ }
+}
+
+static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ struct mem_ctl_info *mci;
+ struct i82860_error_info discard;
/* RDRAM has channels but these don't map onto the abstractions that
edac uses.
return -ENOMEM;
debugf3("%s(): init mci\n", __func__);
- mci->pdev = pdev;
+ mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
-
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
/* I"m not sure about this but I think that all RDRAM is SECDED */
mci->edac_cap = EDAC_FLAG_SECDED;
- /* adjust FLAGS */
-
mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.1.2.6 $";
+ mci->mod_ver = I82860_REVISION;
mci->ctl_name = i82860_devs[dev_idx].ctl_name;
mci->edac_check = i82860_check;
mci->ctl_page_to_phys = NULL;
+ i82860_init_csrows(mci, pdev);
+ i82860_get_error_info(mci, &discard); /* clear counters */
- pci_read_config_word(mci->pdev, I82860_MCHCFG, &mchcfg_ddim);
- mchcfg_ddim = mchcfg_ddim & 0x180;
-
- /*
- * The group row boundary (GRA) reg values are boundary address
- * for each DRAM row with a granularity of 16MB. GRA regs are
- * cumulative; therefore GRA15 will contain the total memory contained
- * in all eight rows.
+ /* Here we assume that we will never see multiple instances of this
+ * type of memory controller. The ID is therefore hardcoded to 0.
*/
- for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
- u16 value;
- u32 cumul_size;
- struct csrow_info *csrow = &mci->csrows[index];
-
- pci_read_config_word(mci->pdev, I82860_GBA + index * 2,
- &value);
-
- cumul_size = (value & I82860_GBA_MASK) <<
- (I82860_GBA_SHIFT - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
- cumul_size);
-
- if (cumul_size == last_cumul_size)
- continue; /* not populated */
-
- csrow->first_page = last_cumul_size;
- csrow->last_page = cumul_size - 1;
- csrow->nr_pages = cumul_size - last_cumul_size;
- last_cumul_size = cumul_size;
- csrow->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */
- csrow->mtype = MEM_RMBS;
- csrow->dtype = DEV_UNKNOWN;
- csrow->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
+ if (edac_mc_add_mc(mci,0)) {
+ debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ goto fail;
}
- i82860_get_error_info(mci, &discard); /* clear counters */
+ /* get this far and it's successful */
+ debugf3("%s(): success\n", __func__);
- if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
- edac_mc_free(mci);
- } else {
- /* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
- rc = 0;
- }
+ return 0;
- return rc;
+fail:
+ edac_mc_free(mci);
+ return -ENODEV;
}
/* returns count (>= 0), or negative on error */
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_del_mc(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
edac_mc_free(mci);
git.openpandora.org / pandora-kernel.git / blobdiff