/* Memory controller */
{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
- /* Exists only for RDIMM */
+
+ /* Exists only for RDIMM */
{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 },
{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) },
-
- /* Generic Non-core registers */
- /*
- * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
- * On Xeon 55xx, however, it has a different id (8086:2c40). So,
- * the probing code needs to test for the other address in case of
- * failure of this one
- */
- { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) },
-
};
static const struct pci_id_descr pci_dev_descr_lynnfield[] = {
{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) },
-
- /*
- * This is the PCI device has an alternate address on some
- * processors like Core i7 860
- */
- { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) },
};
static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) },
-
- /* Generic Non-core registers */
- { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) },
-
};
#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
+ {0,} /* 0 terminated list. */
};
/*
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
dev_descr->dev_id, *prev);
- /*
- * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
- * is at addr 8086:2c40, instead of 8086:2c41. So, we need
- * to probe for the alternate address in case of failure
- */
- if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
-
- if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
- *prev);
-
if (!pdev) {
if (*prev) {
*prev = pdev;
dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ /*
+ * As stated on drivers/pci/search.c, the reference count for
+ * @from is always decremented if it is not %NULL. So, as we need
+ * to get all devices up to null, we need to do a get for the device
+ */
+ pci_dev_get(pdev);
+
*prev = pdev;
return 0;
static int i7core_get_all_devices(void)
{
- int i, j, rc, last_bus;
+ int i, rc, last_bus;
struct pci_dev *pdev = NULL;
- const struct pci_id_table *table;
+ const struct pci_id_table *table = pci_dev_table;
last_bus = i7core_pci_lastbus();
- for (j = 0; j < ARRAY_SIZE(pci_dev_table); j++) {
- table = &pci_dev_table[j];
+ while (table && table->descr) {
for (i = 0; i < table->n_devs; i++) {
pdev = NULL;
do {
}
} while (pdev);
}
+ table++;
}
return 0;
*/
if (unlikely(probed >= 1)) {
mutex_unlock(&i7core_edac_lock);
- return -EINVAL;
+ return -ENODEV;
}
probed++;
return 0;
fail1:
- list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
- if (i7core_dev->mci)
- i7core_unregister_mci(i7core_dev);
- }
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list)
+ i7core_unregister_mci(i7core_dev);
+
i7core_put_all_devices();
fail0:
mutex_unlock(&i7core_edac_lock);
return;
}
- list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
- if (i7core_dev->mci)
- i7core_unregister_mci(i7core_dev);
- }
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list)
+ i7core_unregister_mci(i7core_dev);
/* Release PCI resources */
i7core_put_all_devices();