#include <linux/workqueue.h>
#include <linux/hdlc.h>
-#ifdef CONFIG_HDLC_MODULE
-#define CONFIG_HDLC 1
+#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
+#define SYNCLINK_GENERIC_HDLC 1
+#else
+#define SYNCLINK_GENERIC_HDLC 0
#endif
#define GET_USER(error,value,addr) error = get_user(value,addr)
int dosyncppp;
spinlock_t netlock;
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
struct net_device *netdev;
#endif
static int open(struct tty_struct *tty, struct file * filp);
static void close(struct tty_struct *tty, struct file * filp);
static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct termios *old_termios);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
static int write(struct tty_struct *tty, const unsigned char *buf, int count);
static void put_char(struct tty_struct *tty, unsigned char ch);
static void unthrottle(struct tty_struct * tty);
static void set_break(struct tty_struct *tty, int break_state);
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
static void hdlcdev_tx_done(SLMP_INFO *info);
static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
/* Set new termios settings
*/
-static void set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
unsigned long flags;
spin_unlock_irqrestore(&info->lock,flags);
}
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
/**
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
set_signals(info);
}
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
info->input_signal_events.dcd_up++;
} else
info->input_signal_events.dcd_down++;
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
if (info->netcount) {
if (status & SerialSignal_DCD)
netif_carrier_on(info->netdev);
info->irq_level,
info->max_frame_size );
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
hdlcdev_init(info);
#endif
}
/* release devices */
info = synclinkmp_device_list;
while(info) {
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
hdlcdev_exit(info);
#endif
free_dma_bufs(info);
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &ops);
if ((rc = tty_register_driver(serial_driver)) < 0) {
info->icount.rxcrc++;
framesize = 0;
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
{
struct net_device_stats *stats = hdlc_stats(info->netdev);
stats->rx_errors++;
index = 0;
}
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_rx(info,info->tmp_rx_buf,framesize);
else
spin_unlock_irqrestore(&info->lock,flags);
-#ifdef CONFIG_HDLC
+#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else