#include <linux/module.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include "specialix_io8.h"
#include "cd1865.h"
static int sx_debug;
static int sx_rxfifo = SPECIALIX_RXFIFO;
+static int sx_rtscts;
#ifdef DEBUG
-#define dprintk(f, str...) if (sx_debug & f) printk (str)
+#define dprintk(f, str...) if (sx_debug & f) printk(str)
#else
#define dprintk(f, str...) /* nothing */
#endif
#define SX_DEBUG_FIFO 0x0800
-#define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__func__)
-#define func_exit() dprintk (SX_DEBUG_FLOW, "io8: exit %s\n", __func__)
-
-#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
+#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__)
+#define func_exit() dprintk(SX_DEBUG_FLOW, "io8: exit %s\n", __func__)
/* Configurable options: */
/* Am I paranoid or not ? ;-) */
#define SPECIALIX_PARANOIA_CHECK
-/* Do I trust the IRQ from the card? (enabeling it doesn't seem to help)
- When the IRQ routine leaves the chip in a state that is keeps on
- requiring attention, the timer doesn't help either. */
-#undef SPECIALIX_TIMER
-
-#ifdef SPECIALIX_TIMER
-static int sx_poll = HZ;
-#endif
-
-
-
/*
* The following defines are mostly for testing purposes. But if you need
* some nice reporting in your syslog, you can define them also.
-#ifdef CONFIG_SPECIALIX_RTSCTS
-#define SX_CRTSCTS(bla) 1
-#else
-#define SX_CRTSCTS(tty) C_CRTSCTS(tty)
-#endif
-
-
-/* Used to be outb (0xff, 0x80); */
-#define short_pause() udelay (1)
-
#define SPECIALIX_LEGAL_FLAGS \
(ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \
static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
-#ifdef SPECIALIX_TIMER
-static struct timer_list missed_irq_timer;
-static irqreturn_t sx_interrupt(int irq, void * dev_id);
-#endif
-
-
-
-static inline int sx_paranoia_check(struct specialix_port const * port,
+static int sx_paranoia_check(struct specialix_port const *port,
char *name, const char *routine)
{
#ifdef SPECIALIX_PARANOIA_CHECK
- static const char *badmagic =
- KERN_ERR "sx: Warning: bad specialix port magic number for device %s in %s\n";
- static const char *badinfo =
- KERN_ERR "sx: Warning: null specialix port for device %s in %s\n";
+ static const char *badmagic = KERN_ERR
+ "sx: Warning: bad specialix port magic number for device %s in %s\n";
+ static const char *badinfo = KERN_ERR
+ "sx: Warning: null specialix port for device %s in %s\n";
if (!port) {
printk(badinfo, name, routine);
*/
/* Get board number from pointer */
-static inline int board_No (struct specialix_board * bp)
+static inline int board_No(struct specialix_board *bp)
{
return bp - sx_board;
}
/* Get port number from pointer */
-static inline int port_No (struct specialix_port const * port)
+static inline int port_No(struct specialix_port const *port)
{
return SX_PORT(port - sx_port);
}
/* Get pointer to board from pointer to port */
-static inline struct specialix_board * port_Board(struct specialix_port const * port)
+static inline struct specialix_board *port_Board(
+ struct specialix_port const *port)
{
return &sx_board[SX_BOARD(port - sx_port)];
}
/* Input Byte from CL CD186x register */
-static inline unsigned char sx_in(struct specialix_board * bp, unsigned short reg)
+static inline unsigned char sx_in(struct specialix_board *bp,
+ unsigned short reg)
{
bp->reg = reg | 0x80;
- outb (reg | 0x80, bp->base + SX_ADDR_REG);
- return inb (bp->base + SX_DATA_REG);
+ outb(reg | 0x80, bp->base + SX_ADDR_REG);
+ return inb(bp->base + SX_DATA_REG);
}
/* Output Byte to CL CD186x register */
-static inline void sx_out(struct specialix_board * bp, unsigned short reg,
+static inline void sx_out(struct specialix_board *bp, unsigned short reg,
unsigned char val)
{
bp->reg = reg | 0x80;
- outb (reg | 0x80, bp->base + SX_ADDR_REG);
- outb (val, bp->base + SX_DATA_REG);
+ outb(reg | 0x80, bp->base + SX_ADDR_REG);
+ outb(val, bp->base + SX_DATA_REG);
}
/* Input Byte from CL CD186x register */
-static inline unsigned char sx_in_off(struct specialix_board * bp, unsigned short reg)
+static inline unsigned char sx_in_off(struct specialix_board *bp,
+ unsigned short reg)
{
bp->reg = reg;
- outb (reg, bp->base + SX_ADDR_REG);
- return inb (bp->base + SX_DATA_REG);
+ outb(reg, bp->base + SX_ADDR_REG);
+ return inb(bp->base + SX_DATA_REG);
}
/* Output Byte to CL CD186x register */
-static inline void sx_out_off(struct specialix_board * bp, unsigned short reg,
- unsigned char val)
+static inline void sx_out_off(struct specialix_board *bp,
+ unsigned short reg, unsigned char val)
{
bp->reg = reg;
- outb (reg, bp->base + SX_ADDR_REG);
- outb (val, bp->base + SX_DATA_REG);
+ outb(reg, bp->base + SX_ADDR_REG);
+ outb(val, bp->base + SX_DATA_REG);
}
/* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR(struct specialix_board * bp)
+static void sx_wait_CCR(struct specialix_board *bp)
{
unsigned long delay, flags;
unsigned char ccr;
spin_unlock_irqrestore(&bp->lock, flags);
if (!ccr)
return;
- udelay (1);
+ udelay(1);
}
printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
/* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR_off(struct specialix_board * bp)
+static void sx_wait_CCR_off(struct specialix_board *bp)
{
unsigned long delay;
unsigned char crr;
spin_unlock_irqrestore(&bp->lock, flags);
if (!crr)
return;
- udelay (1);
+ udelay(1);
}
printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
* specialix IO8+ IO range functions.
*/
-static inline int sx_request_io_range(struct specialix_board * bp)
+static int sx_request_io_range(struct specialix_board *bp)
{
return request_region(bp->base,
bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
}
-static inline void sx_release_io_range(struct specialix_board * bp)
+static void sx_release_io_range(struct specialix_board *bp)
{
- release_region(bp->base,
- bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE);
+ release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ?
+ SX_PCI_IO_SPACE : SX_IO_SPACE);
}
/* Set the IRQ using the RTS lines that run to the PAL on the board.... */
-static int sx_set_irq ( struct specialix_board *bp)
+static int sx_set_irq(struct specialix_board *bp)
{
int virq;
int i;
return 1;
switch (bp->irq) {
/* In the same order as in the docs... */
- case 15: virq = 0;break;
- case 12: virq = 1;break;
- case 11: virq = 2;break;
- case 9: virq = 3;break;
- default: printk (KERN_ERR "Speclialix: cannot set irq to %d.\n", bp->irq);
- return 0;
+ case 15:
+ virq = 0;
+ break;
+ case 12:
+ virq = 1;
+ break;
+ case 11:
+ virq = 2;
+ break;
+ case 9:
+ virq = 3;
+ break;
+ default:printk(KERN_ERR
+ "Speclialix: cannot set irq to %d.\n", bp->irq);
+ return 0;
}
spin_lock_irqsave(&bp->lock, flags);
- for (i=0;i<2;i++) {
+ for (i = 0; i < 2; i++) {
sx_out(bp, CD186x_CAR, i);
sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0);
}
/* Reset and setup CD186x chip */
-static int sx_init_CD186x(struct specialix_board * bp)
+static int sx_init_CD186x(struct specialix_board *bp)
{
unsigned long flags;
int scaler;
sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT); /* Prio for transmitter intr */
sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */
/* Set RegAckEn */
- sx_out_off(bp, CD186x_SRCR, sx_in (bp, CD186x_SRCR) | SRCR_REGACKEN);
+ sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN);
/* Setting up prescaler. We need 4 ticks per 1 ms */
scaler = SX_OSCFREQ/SPECIALIX_TPS;
sx_out_off(bp, CD186x_PPRL, scaler & 0xff);
spin_unlock_irqrestore(&bp->lock, flags);
- if (!sx_set_irq (bp)) {
+ if (!sx_set_irq(bp)) {
/* Figure out how to pass this along... */
- printk (KERN_ERR "Cannot set irq to %d.\n", bp->irq);
+ printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq);
rv = 0;
}
}
-static int read_cross_byte (struct specialix_board *bp, int reg, int bit)
+static int read_cross_byte(struct specialix_board *bp, int reg, int bit)
{
int i;
int t;
unsigned long flags;
spin_lock_irqsave(&bp->lock, flags);
- for (i=0, t=0;i<8;i++) {
- sx_out_off (bp, CD186x_CAR, i);
- if (sx_in_off (bp, reg) & bit)
+ for (i = 0, t = 0; i < 8; i++) {
+ sx_out_off(bp, CD186x_CAR, i);
+ if (sx_in_off(bp, reg) & bit)
t |= 1 << i;
}
spin_unlock_irqrestore(&bp->lock, flags);
}
-#ifdef SPECIALIX_TIMER
-void missed_irq (unsigned long data)
-{
- unsigned char irq;
- unsigned long flags;
- struct specialix_board *bp = (struct specialix_board *)data;
-
- spin_lock_irqsave(&bp->lock, flags);
- irq = sx_in ((struct specialix_board *)data, CD186x_SRSR) &
- (SRSR_RREQint |
- SRSR_TREQint |
- SRSR_MREQint);
- spin_unlock_irqrestore(&bp->lock, flags);
- if (irq) {
- printk (KERN_INFO "Missed interrupt... Calling int from timer. \n");
- sx_interrupt (-1, bp);
- }
- mod_timer(&missed_irq_timer, jiffies + sx_poll);
-}
-#endif
-
-
-
/* Main probing routine, also sets irq. */
static int sx_probe(struct specialix_board *bp)
{
unsigned char val1, val2;
-#if 0
- int irqs = 0;
- int retries;
-#endif
int rev;
int chip;
/* Are the I/O ports here ? */
sx_out_off(bp, CD186x_PPRL, 0x5a);
- short_pause ();
+ udelay(1);
val1 = sx_in_off(bp, CD186x_PPRL);
sx_out_off(bp, CD186x_PPRL, 0xa5);
- short_pause ();
+ udelay(1);
val2 = sx_in_off(bp, CD186x_PPRL);
- if ((val1 != 0x5a) || (val2 != 0xa5)) {
- printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
- board_No(bp), bp->base);
+ if (val1 != 0x5a || val2 != 0xa5) {
+ printk(KERN_INFO
+ "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
+ board_No(bp), bp->base);
sx_release_io_range(bp);
func_exit();
return 1;
/* Check the DSR lines that Specialix uses as board
identification */
- val1 = read_cross_byte (bp, CD186x_MSVR, MSVR_DSR);
- val2 = read_cross_byte (bp, CD186x_MSVR, MSVR_RTS);
- dprintk (SX_DEBUG_INIT, "sx%d: DSR lines are: %02x, rts lines are: %02x\n",
- board_No(bp), val1, val2);
+ val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR);
+ val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS);
+ dprintk(SX_DEBUG_INIT,
+ "sx%d: DSR lines are: %02x, rts lines are: %02x\n",
+ board_No(bp), val1, val2);
/* They managed to switch the bit order between the docs and
the IO8+ card. The new PCI card now conforms to old docs.
old card. */
val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2;
if (val1 != val2) {
- printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
+ printk(KERN_INFO
+ "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
board_No(bp), val2, bp->base, val1);
sx_release_io_range(bp);
func_exit();
}
-#if 0
- /* It's time to find IRQ for this board */
- for (retries = 0; retries < 5 && irqs <= 0; retries++) {
- irqs = probe_irq_on();
- sx_init_CD186x(bp); /* Reset CD186x chip */
- sx_out(bp, CD186x_CAR, 2); /* Select port 2 */
- sx_wait_CCR(bp);
- sx_out(bp, CD186x_CCR, CCR_TXEN); /* Enable transmitter */
- sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr */
- msleep(50);
- irqs = probe_irq_off(irqs);
-
- dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
- dprintk (SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR));
- dprintk (SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR));
- dprintk (SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR));
- dprintk (SX_DEBUG_INIT, "\n");
-
- /* Reset CD186x again */
- if (!sx_init_CD186x(bp)) {
- /* Hmmm. This is dead code anyway. */
- }
-
- dprintk (SX_DEBUG_INIT "val1 = %02x, val2 = %02x, val3 = %02x.\n",
- val1, val2, val3);
-
- }
-
-#if 0
- if (irqs <= 0) {
- printk(KERN_ERR "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
- board_No(bp), bp->base);
- sx_release_io_range(bp);
- func_exit();
- return 1;
- }
-#endif
- printk (KERN_INFO "Started with irq=%d, but now have irq=%d.\n", bp->irq, irqs);
- if (irqs > 0)
- bp->irq = irqs;
-#endif
/* Reset CD186x again */
if (!sx_init_CD186x(bp)) {
sx_release_io_range(bp);
bp->flags |= SX_BOARD_PRESENT;
/* Chip revcode pkgtype
- GFRCR SRCR bit 7
+ GFRCR SRCR bit 7
CD180 rev B 0x81 0
CD180 rev C 0x82 0
CD1864 rev A 0x82 1
*/
switch (sx_in_off(bp, CD186x_GFRCR)) {
- case 0x82:chip = 1864;rev='A';break;
- case 0x83:chip = 1865;rev='A';break;
- case 0x84:chip = 1865;rev='B';break;
- case 0x85:chip = 1865;rev='C';break; /* Does not exist at this time */
- default:chip=-1;rev='x';
+ case 0x82:
+ chip = 1864;
+ rev = 'A';
+ break;
+ case 0x83:
+ chip = 1865;
+ rev = 'A';
+ break;
+ case 0x84:
+ chip = 1865;
+ rev = 'B';
+ break;
+ case 0x85:
+ chip = 1865;
+ rev = 'C';
+ break; /* Does not exist at this time */
+ default:
+ chip = -1;
+ rev = 'x';
}
- dprintk (SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR) );
-
-#ifdef SPECIALIX_TIMER
- setup_timer(&missed_irq_timer, missed_irq, (unsigned long)bp);
- mod_timer(&missed_irq_timer, jiffies + sx_poll);
-#endif
+ dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR));
- printk(KERN_INFO"sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
- board_No(bp),
- bp->base, bp->irq,
- chip, rev);
+ printk(KERN_INFO
+ "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
+ board_No(bp), bp->base, bp->irq, chip, rev);
func_exit();
return 0;
* Interrupt processing routines.
* */
-static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
- unsigned char const * what)
+static struct specialix_port *sx_get_port(struct specialix_board *bp,
+ unsigned char const *what)
{
unsigned char channel;
- struct specialix_port * port = NULL;
+ struct specialix_port *port = NULL;
channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF;
- dprintk (SX_DEBUG_CHAN, "channel: %d\n", channel);
+ dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel);
if (channel < CD186x_NCH) {
port = &sx_port[board_No(bp) * SX_NPORT + channel];
- dprintk (SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",board_No(bp) * SX_NPORT + channel, port, port->port.flags & ASYNC_INITIALIZED);
+ dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",
+ board_No(bp) * SX_NPORT + channel, port,
+ port->port.flags & ASYNC_INITIALIZED);
if (port->port.flags & ASYNC_INITIALIZED) {
- dprintk (SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
+ dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
func_exit();
return port;
}
}
-static inline void sx_receive_exc(struct specialix_board * bp)
+static void sx_receive_exc(struct specialix_board *bp)
{
struct specialix_port *port;
struct tty_struct *tty;
port = sx_get_port(bp, "Receive");
if (!port) {
- dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
+ dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
func_exit();
return;
}
status = sx_in(bp, CD186x_RCSR);
- dprintk (SX_DEBUG_RX, "status: 0x%x\n", status);
+ dprintk(SX_DEBUG_RX, "status: 0x%x\n", status);
if (status & RCSR_OE) {
port->overrun++;
- dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Overrun. Total %ld overruns.\n",
- board_No(bp), port_No(port), port->overrun);
+ dprintk(SX_DEBUG_FIFO,
+ "sx%d: port %d: Overrun. Total %ld overruns.\n",
+ board_No(bp), port_No(port), port->overrun);
}
status &= port->mark_mask;
/* This flip buffer check needs to be below the reading of the
status register to reset the chip's IRQ.... */
if (tty_buffer_request_room(tty, 1) == 0) {
- dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Working around flip buffer overflow.\n",
- board_No(bp), port_No(port));
+ dprintk(SX_DEBUG_FIFO,
+ "sx%d: port %d: Working around flip buffer overflow.\n",
+ board_No(bp), port_No(port));
func_exit();
return;
}
return;
}
if (status & RCSR_TOUT) {
- printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
- board_No(bp), port_No(port));
+ printk(KERN_INFO
+ "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
+ board_No(bp), port_No(port));
func_exit();
return;
else
flag = TTY_NORMAL;
- if(tty_insert_flip_char(tty, ch, flag))
+ if (tty_insert_flip_char(tty, ch, flag))
tty_flip_buffer_push(tty);
func_exit();
}
-static inline void sx_receive(struct specialix_board * bp)
+static void sx_receive(struct specialix_board *bp)
{
struct specialix_port *port;
struct tty_struct *tty;
func_enter();
- if (!(port = sx_get_port(bp, "Receive"))) {
- dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
+ port = sx_get_port(bp, "Receive");
+ if (port == NULL) {
+ dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
func_exit();
return;
}
tty = port->port.tty;
count = sx_in(bp, CD186x_RDCR);
- dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
+ dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
port->hits[count > 8 ? 9 : count]++;
tty_buffer_request_room(tty, count);
}
-static inline void sx_transmit(struct specialix_board * bp)
+static void sx_transmit(struct specialix_board *bp)
{
struct specialix_port *port;
struct tty_struct *tty;
unsigned char count;
func_enter();
- if (!(port = sx_get_port(bp, "Transmit"))) {
+ port = sx_get_port(bp, "Transmit");
+ if (port == NULL) {
func_exit();
return;
}
- dprintk (SX_DEBUG_TX, "port: %p\n", port);
+ dprintk(SX_DEBUG_TX, "port: %p\n", port);
tty = port->port.tty;
if (port->IER & IER_TXEMPTY) {
sx_out(bp, CD186x_TDR, CD186x_C_ESC);
sx_out(bp, CD186x_TDR, CD186x_C_DELAY);
sx_out(bp, CD186x_TDR, count);
- if (!(port->break_length -= count))
+ port->break_length -= count;
+ if (port->break_length == 0)
port->break_length--;
} else {
sx_out(bp, CD186x_TDR, CD186x_C_ESC);
sx_out(bp, CD186x_IER, port->IER);
}
if (port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
+ tty_wakeup(tty);
func_exit();
}
-static inline void sx_check_modem(struct specialix_board * bp)
+static void sx_check_modem(struct specialix_board *bp)
{
struct specialix_port *port;
struct tty_struct *tty;
unsigned char mcr;
int msvr_cd;
- dprintk (SX_DEBUG_SIGNALS, "Modem intr. ");
- if (!(port = sx_get_port(bp, "Modem")))
+ dprintk(SX_DEBUG_SIGNALS, "Modem intr. ");
+ port = sx_get_port(bp, "Modem");
+ if (port == NULL)
return;
tty = port->port.tty;
mcr = sx_in(bp, CD186x_MCR);
- printk ("mcr = %02x.\n", mcr);
if ((mcr & MCR_CDCHG)) {
- dprintk (SX_DEBUG_SIGNALS, "CD just changed... ");
+ dprintk(SX_DEBUG_SIGNALS, "CD just changed... ");
msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD;
if (msvr_cd) {
- dprintk (SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
+ dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
wake_up_interruptible(&port->port.open_wait);
} else {
- dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n");
+ dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n");
tty_hangup(tty);
}
}
spin_lock_irqsave(&bp->lock, flags);
- dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
+ dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__,
+ port_No(sx_get_port(bp, "INT")),
+ SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
if (!(bp->flags & SX_BOARD_ACTIVE)) {
- dprintk (SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", bp->irq);
+ dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n",
+ bp->irq);
spin_unlock_irqrestore(&bp->lock, flags);
func_exit();
return IRQ_NONE;
saved_reg = bp->reg;
- while ((++loop < 16) && (status = (sx_in(bp, CD186x_SRSR) &
- (SRSR_RREQint |
- SRSR_TREQint |
- SRSR_MREQint)))) {
+ while (++loop < 16) {
+ status = sx_in(bp, CD186x_SRSR) &
+ (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
+ if (status == 0)
+ break;
if (status & SRSR_RREQint) {
ack = sx_in(bp, CD186x_RRAR);
else if (ack == (SX_ID | GIVR_IT_REXC))
sx_receive_exc(bp);
else
- printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
- board_No(bp), status, ack);
+ printk(KERN_ERR
+ "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
+ board_No(bp), status, ack);
} else if (status & SRSR_TREQint) {
ack = sx_in(bp, CD186x_TRAR);
sx_transmit(bp);
else
printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n",
- board_No(bp), status, ack, port_No (sx_get_port (bp, "Int")));
+ board_No(bp), status, ack,
+ port_No(sx_get_port(bp, "Int")));
} else if (status & SRSR_MREQint) {
ack = sx_in(bp, CD186x_MRAR);
if (ack == (SX_ID | GIVR_IT_MODEM))
sx_check_modem(bp);
else
- printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
+ printk(KERN_ERR
+ "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
board_No(bp), status, ack);
}
sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */
}
bp->reg = saved_reg;
- outb (bp->reg, bp->base + SX_ADDR_REG);
+ outb(bp->reg, bp->base + SX_ADDR_REG);
spin_unlock_irqrestore(&bp->lock, flags);
func_exit();
return IRQ_HANDLED;
* Routines for open & close processing.
*/
-static void turn_ints_off (struct specialix_board *bp)
+static void turn_ints_off(struct specialix_board *bp)
{
unsigned long flags;
func_enter();
- if (bp->flags & SX_BOARD_IS_PCI) {
- /* This was intended for enabeling the interrupt on the
- * PCI card. However it seems that it's already enabled
- * and as PCI interrupts can be shared, there is no real
- * reason to have to turn it off. */
- }
-
spin_lock_irqsave(&bp->lock, flags);
- (void) sx_in_off (bp, 0); /* Turn off interrupts. */
+ (void) sx_in_off(bp, 0); /* Turn off interrupts. */
spin_unlock_irqrestore(&bp->lock, flags);
func_exit();
}
-static void turn_ints_on (struct specialix_board *bp)
+static void turn_ints_on(struct specialix_board *bp)
{
unsigned long flags;
func_enter();
- if (bp->flags & SX_BOARD_IS_PCI) {
- /* play with the PCI chip. See comment above. */
- }
spin_lock_irqsave(&bp->lock, flags);
- (void) sx_in (bp, 0); /* Turn ON interrupts. */
+ (void) sx_in(bp, 0); /* Turn ON interrupts. */
spin_unlock_irqrestore(&bp->lock, flags);
func_exit();
/* Called with disabled interrupts */
-static inline int sx_setup_board(struct specialix_board * bp)
+static int sx_setup_board(struct specialix_board *bp)
{
int error;
return 0;
if (bp->flags & SX_BOARD_IS_PCI)
- error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
+ error = request_irq(bp->irq, sx_interrupt,
+ IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
else
- error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED, "specialix IO8+", bp);
+ error = request_irq(bp->irq, sx_interrupt,
+ IRQF_DISABLED, "specialix IO8+", bp);
if (error)
return error;
- turn_ints_on (bp);
+ turn_ints_on(bp);
bp->flags |= SX_BOARD_ACTIVE;
return 0;
/* Called with disabled interrupts */
-static inline void sx_shutdown_board(struct specialix_board *bp)
+static void sx_shutdown_board(struct specialix_board *bp)
{
func_enter();
bp->flags &= ~SX_BOARD_ACTIVE;
- dprintk (SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
- bp->irq, board_No (bp));
+ dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
+ bp->irq, board_No(bp));
free_irq(bp->irq, bp);
-
- turn_ints_off (bp);
-
-
+ turn_ints_off(bp);
func_exit();
}
+static unsigned int sx_crtscts(struct tty_struct *tty)
+{
+ if (sx_rtscts)
+ return C_CRTSCTS(tty);
+ return 1;
+}
/*
* Setting up port characteristics.
* Must be called with disabled interrupts
*/
-static void sx_change_speed(struct specialix_board *bp, struct specialix_port *port)
+static void sx_change_speed(struct specialix_board *bp,
+ struct specialix_port *port)
{
struct tty_struct *tty;
unsigned long baud;
func_enter();
- if (!(tty = port->port.tty) || !tty->termios) {
+ tty = port->port.tty;
+ if (!tty || !tty->termios) {
func_exit();
return;
}
/* The Specialix board doens't implement the RTS lines.
They are used to set the IRQ level. Don't touch them. */
- if (SX_CRTSCTS(tty))
+ if (sx_crtscts(tty))
port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
else
port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
spin_unlock_irqrestore(&bp->lock, flags);
- dprintk (SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
+ dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
baud = tty_get_baud_rate(tty);
if (baud == 38400) {
if (!baud) {
/* Drop DTR & exit */
- dprintk (SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n");
- if (!SX_CRTSCTS (tty)) {
- port -> MSVR &= ~ MSVR_DTR;
+ dprintk(SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n");
+ if (!sx_crtscts(tty)) {
+ port->MSVR &= ~MSVR_DTR;
spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_MSVR, port->MSVR );
+ sx_out(bp, CD186x_MSVR, port->MSVR);
spin_unlock_irqrestore(&bp->lock, flags);
- }
- else
- dprintk (SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
+ } else
+ dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
return;
} else {
/* Set DTR on */
- if (!SX_CRTSCTS (tty)) {
- port ->MSVR |= MSVR_DTR;
- }
+ if (!sx_crtscts(tty))
+ port->MSVR |= MSVR_DTR;
}
/*
/* Set baud rate for port */
tmp = port->custom_divisor ;
- if ( tmp )
- printk (KERN_INFO "sx%d: Using custom baud rate divisor %ld. \n"
- "This is an untested option, please be carefull.\n",
- port_No (port), tmp);
+ if (tmp)
+ printk(KERN_INFO
+ "sx%d: Using custom baud rate divisor %ld. \n"
+ "This is an untested option, please be careful.\n",
+ port_No(port), tmp);
else
- tmp = (((SX_OSCFREQ + baud/2) / baud +
- CD186x_TPC/2) / CD186x_TPC);
+ tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) /
+ CD186x_TPC);
- if ((tmp < 0x10) && time_before(again, jiffies)) {
+ if (tmp < 0x10 && time_before(again, jiffies)) {
again = jiffies + HZ * 60;
/* Page 48 of version 2.0 of the CL-CD1865 databook */
if (tmp >= 12) {
- printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
- "Performance degradation is possible.\n"
- "Read specialix.txt for more info.\n",
- port_No (port), tmp);
+ printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
+ "Performance degradation is possible.\n"
+ "Read specialix.txt for more info.\n",
+ port_No(port), tmp);
} else {
- printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
- "Warning: overstressing Cirrus chip. "
- "This might not work.\n"
- "Read specialix.txt for more info.\n",
- port_No (port), tmp);
+ printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
+ "Warning: overstressing Cirrus chip. This might not work.\n"
+ "Read specialix.txt for more info.\n", port_No(port), tmp);
}
}
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_TBPRL, tmp & 0xff);
spin_unlock_irqrestore(&bp->lock, flags);
if (port->custom_divisor)
- baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor;
+ baud = (SX_OSCFREQ + port->custom_divisor/2) /
+ port->custom_divisor;
baud = (baud + 5) / 10; /* Estimated CPS */
/* Two timer ticks seems enough to wakeup something like SLIP driver */
sx_out(bp, CD186x_RTPR, tmp);
spin_unlock_irqrestore(&bp->lock, flags);
switch (C_CSIZE(tty)) {
- case CS5:
+ case CS5:
cor1 |= COR1_5BITS;
break;
- case CS6:
+ case CS6:
cor1 |= COR1_6BITS;
break;
- case CS7:
+ case CS7:
cor1 |= COR1_7BITS;
break;
- case CS8:
+ case CS8:
cor1 |= COR1_8BITS;
break;
}
mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
spin_lock_irqsave(&bp->lock, flags);
- tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR));
+ tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) &
+ (MSVR_CTS|MSVR_DSR));
spin_unlock_irqrestore(&bp->lock, flags);
#else
port->COR2 |= COR2_CTSAE;
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
/* Setting up modem option registers */
- dprintk (SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", mcor1, mcor2);
+ dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n",
+ mcor1, mcor2);
sx_out(bp, CD186x_MCOR1, mcor1);
sx_out(bp, CD186x_MCOR2, mcor2);
spin_unlock_irqrestore(&bp->lock, flags);
/* Must be called with interrupts enabled */
-static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port)
+static int sx_setup_port(struct specialix_board *bp,
+ struct specialix_port *port)
{
unsigned long flags;
/* We may sleep in get_zeroed_page() */
unsigned long tmp;
- if (!(tmp = get_zeroed_page(GFP_KERNEL))) {
+ tmp = get_zeroed_page(GFP_KERNEL);
+ if (tmp == 0L) {
func_exit();
return -ENOMEM;
}
/* Must be called with interrupts disabled */
-static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *port)
+static void sx_shutdown_port(struct specialix_board *bp,
+ struct specialix_port *port)
{
struct tty_struct *tty;
int i;
}
if (sx_debug & SX_DEBUG_FIFO) {
- dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ",
- board_No(bp), port_No(port), port->overrun);
- for (i = 0; i < 10; i++) {
+ dprintk(SX_DEBUG_FIFO,
+ "sx%d: port %d: %ld overruns, FIFO hits [ ",
+ board_No(bp), port_No(port), port->overrun);
+ for (i = 0; i < 10; i++)
dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]);
- }
dprintk(SX_DEBUG_FIFO, "].\n");
}
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
- if (!(tty = port->port.tty) || C_HUPCL(tty)) {
+ tty = port->port.tty;
+ if (tty == NULL || C_HUPCL(tty)) {
/* Drop DTR */
sx_out(bp, CD186x_MSVDTR, 0);
}
}
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
- struct specialix_port *port)
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct specialix_port *port)
{
DECLARE_WAITQUEUE(wait, current);
struct specialix_board *bp = port_Board(port);
retval = 0;
add_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp)) {
+ if (!tty_hung_up_p(filp))
port->port.count--;
- }
spin_unlock_irqrestore(&port->lock, flags);
port->port.blocked_open++;
while (1) {
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
- if (SX_CRTSCTS (tty)) {
+ if (sx_crtscts(tty)) {
/* Activate RTS */
port->MSVR |= MSVR_DTR; /* WTF? */
- sx_out (bp, CD186x_MSVR, port->MSVR);
+ sx_out(bp, CD186x_MSVR, port->MSVR);
} else {
/* Activate DTR */
port->MSVR |= MSVR_DTR;
- sx_out (bp, CD186x_MSVR, port->MSVR);
+ sx_out(bp, CD186x_MSVR, port->MSVR);
}
spin_unlock_irqrestore(&bp->lock, flags);
set_current_state(TASK_INTERRUPTIBLE);
set_current_state(TASK_RUNNING);
remove_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp)) {
+ if (!tty_hung_up_p(filp))
port->port.count++;
- }
port->port.blocked_open--;
spin_unlock_irqrestore(&port->lock, flags);
if (retval) {
}
-static int sx_open(struct tty_struct * tty, struct file * filp)
+static int sx_open(struct tty_struct *tty, struct file *filp)
{
int board;
int error;
- struct specialix_port * port;
- struct specialix_board * bp;
+ struct specialix_port *port;
+ struct specialix_board *bp;
int i;
unsigned long flags;
port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
port->overrun = 0;
for (i = 0; i < 10; i++)
- port->hits[i]=0;
+ port->hits[i] = 0;
- dprintk (SX_DEBUG_OPEN, "Board = %d, bp = %p, port = %p, portno = %d.\n",
- board, bp, port, SX_PORT(tty->index));
+ dprintk(SX_DEBUG_OPEN,
+ "Board = %d, bp = %p, port = %p, portno = %d.\n",
+ board, bp, port, SX_PORT(tty->index));
if (sx_paranoia_check(port, tty->name, "sx_open")) {
func_enter();
return -ENODEV;
}
- if ((error = sx_setup_board(bp))) {
+ error = sx_setup_board(bp);
+ if (error) {
func_exit();
return error;
}
port->port.tty = tty;
spin_unlock_irqrestore(&bp->lock, flags);
- if ((error = sx_setup_port(bp, port))) {
+ error = sx_setup_port(bp, port);
+ if (error) {
func_enter();
return error;
}
- if ((error = block_til_ready(tty, filp, port))) {
+ error = block_til_ready(tty, filp, port);
+ if (error) {
func_enter();
return error;
}
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
- struct specialix_board * bp;
+ struct specialix_board *bp;
func_enter();
func_exit();
}
-static void sx_close(struct tty_struct * tty, struct file * filp)
+static void sx_close(struct tty_struct *tty, struct file *filp)
{
- struct specialix_port *port = (struct specialix_port *) tty->driver_data;
+ struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
unsigned long flags;
unsigned long timeout;
}
bp = port_Board(port);
- if ((tty->count == 1) && (port->port.count != 1)) {
+ if (tty->count == 1 && port->port.count != 1) {
printk(KERN_ERR "sx%d: sx_close: bad port count;"
" tty->count is 1, port count is %d\n",
board_No(bp), port->port.count);
*/
tty->closing = 1;
spin_unlock_irqrestore(&port->lock, flags);
- dprintk (SX_DEBUG_OPEN, "Closing\n");
- if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+ dprintk(SX_DEBUG_OPEN, "Closing\n");
+ if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, port->port.closing_wait);
- }
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
- dprintk (SX_DEBUG_OPEN, "Closed\n");
+ dprintk(SX_DEBUG_OPEN, "Closed\n");
port->IER &= ~IER_RXD;
if (port->port.flags & ASYNC_INITIALIZED) {
port->IER &= ~IER_TXRDY;
* important if there is a transmit FIFO!
*/
timeout = jiffies+HZ;
- while(port->IER & IER_TXEMPTY) {
- set_current_state (TASK_INTERRUPTIBLE);
+ while (port->IER & IER_TXEMPTY) {
+ set_current_state(TASK_INTERRUPTIBLE);
msleep_interruptible(jiffies_to_msecs(port->timeout));
if (time_after(jiffies, timeout)) {
- printk (KERN_INFO "Timeout waiting for close\n");
+ printk(KERN_INFO "Timeout waiting for close\n");
break;
}
}
}
if (--bp->count < 0) {
- printk(KERN_ERR "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
- board_No(bp), bp->count, tty->index);
+ printk(KERN_ERR
+ "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
+ board_No(bp), bp->count, tty->index);
bp->count = 0;
}
if (--port->port.count < 0) {
- printk(KERN_ERR "sx%d: sx_close: bad port count for tty%d: %d\n",
- board_No(bp), port_No(port), port->port.count);
+ printk(KERN_ERR
+ "sx%d: sx_close: bad port count for tty%d: %d\n",
+ board_No(bp), port_No(port), port->port.count);
port->port.count = 0;
}
port->port.tty = NULL;
spin_unlock_irqrestore(&port->lock, flags);
if (port->port.blocked_open) {
- if (port->port.close_delay) {
- msleep_interruptible(jiffies_to_msecs(port->port.close_delay));
- }
+ if (port->port.close_delay)
+ msleep_interruptible(
+ jiffies_to_msecs(port->port.close_delay));
wake_up_interruptible(&port->port.open_wait);
}
port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
}
-static int sx_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
+static int sx_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
}
-static int sx_put_char(struct tty_struct * tty, unsigned char ch)
+static int sx_put_char(struct tty_struct *tty, unsigned char ch)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
- struct specialix_board * bp;
+ struct specialix_board *bp;
func_enter();
func_exit();
return 0;
}
- dprintk (SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
+ dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
if (!port->xmit_buf) {
func_exit();
return 0;
bp = port_Board(port);
spin_lock_irqsave(&port->lock, flags);
- dprintk (SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", port->xmit_cnt, port->xmit_buf);
- if ((port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) || (!port->xmit_buf)) {
+ dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n",
+ port->xmit_cnt, port->xmit_buf);
+ if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) {
spin_unlock_irqrestore(&port->lock, flags);
- dprintk (SX_DEBUG_TX, "Exit size\n");
+ dprintk(SX_DEBUG_TX, "Exit size\n");
func_exit();
return 0;
}
- dprintk (SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
+ dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
port->xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= SERIAL_XMIT_SIZE - 1;
port->xmit_cnt++;
}
-static void sx_flush_chars(struct tty_struct * tty)
+static void sx_flush_chars(struct tty_struct *tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
- struct specialix_board * bp = port_Board(port);
+ struct specialix_board *bp = port_Board(port);
func_enter();
}
-static int sx_write_room(struct tty_struct * tty)
+static int sx_write_room(struct tty_struct *tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
int ret;
return port->xmit_cnt;
}
-
-
static int sx_tiocmget(struct tty_struct *tty, struct file *file)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
- struct specialix_board * bp;
+ struct specialix_board *bp;
unsigned char status;
unsigned int result;
unsigned long flags;
}
bp = port_Board(port);
- spin_lock_irqsave (&bp->lock, flags);
+ spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
status = sx_in(bp, CD186x_MSVR);
spin_unlock_irqrestore(&bp->lock, flags);
- dprintk (SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
- port_No(port), status, sx_in (bp, CD186x_CAR));
- dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
- if (SX_CRTSCTS(port->port.tty)) {
- result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
- | ((status & MSVR_DTR) ? TIOCM_RTS : 0)
- | ((status & MSVR_CD) ? TIOCM_CAR : 0)
- |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
- | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
+ dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
+ port_No(port), status, sx_in(bp, CD186x_CAR));
+ dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
+ if (sx_crtscts(port->port.tty)) {
+ result = TIOCM_DTR | TIOCM_DSR
+ | ((status & MSVR_DTR) ? TIOCM_RTS : 0)
+ | ((status & MSVR_CD) ? TIOCM_CAR : 0)
+ | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
} else {
- result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
- | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
- | ((status & MSVR_CD) ? TIOCM_CAR : 0)
- |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
- | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
+ result = TIOCM_RTS | TIOCM_DSR
+ | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
+ | ((status & MSVR_CD) ? TIOCM_CAR : 0)
+ | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
}
func_exit();
bp = port_Board(port);
spin_lock_irqsave(&port->lock, flags);
- /* if (set & TIOCM_RTS)
- port->MSVR |= MSVR_RTS; */
- /* if (set & TIOCM_DTR)
- port->MSVR |= MSVR_DTR; */
-
- if (SX_CRTSCTS(port->port.tty)) {
+ if (sx_crtscts(port->port.tty)) {
if (set & TIOCM_RTS)
port->MSVR |= MSVR_DTR;
} else {
if (set & TIOCM_DTR)
port->MSVR |= MSVR_DTR;
}
-
- /* if (clear & TIOCM_RTS)
- port->MSVR &= ~MSVR_RTS; */
- /* if (clear & TIOCM_DTR)
- port->MSVR &= ~MSVR_DTR; */
- if (SX_CRTSCTS(port->port.tty)) {
+ if (sx_crtscts(port->port.tty)) {
if (clear & TIOCM_RTS)
port->MSVR &= ~MSVR_DTR;
} else {
}
-static inline void sx_send_break(struct specialix_port * port, unsigned long length)
+static int sx_send_break(struct tty_struct *tty, int length)
{
+ struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp = port_Board(port);
unsigned long flags;
func_enter();
+ if (length == 0 || length == -1)
+ return -EOPNOTSUPP;
- spin_lock_irqsave (&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
port->break_length = SPECIALIX_TPS / HZ * length;
port->COR2 |= COR2_ETC;
port->IER |= IER_TXRDY;
sx_out(bp, CD186x_COR2, port->COR2);
sx_out(bp, CD186x_IER, port->IER);
spin_unlock_irqrestore(&bp->lock, flags);
- spin_unlock_irqrestore (&port->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
sx_wait_CCR(bp);
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_CORCHG2);
sx_wait_CCR(bp);
func_exit();
+ return 0;
}
-static inline int sx_set_serial_info(struct specialix_port * port,
- struct serial_struct __user * newinfo)
+static int sx_set_serial_info(struct specialix_port *port,
+ struct serial_struct __user *newinfo)
{
struct serial_struct tmp;
struct specialix_board *bp = port_Board(port);
return -EPERM;
}
port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
- (tmp.flags & ASYNC_USR_MASK));
+ (tmp.flags & ASYNC_USR_MASK));
port->custom_divisor = tmp.custom_divisor;
} else {
port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
- (tmp.flags & ASYNC_FLAGS));
+ (tmp.flags & ASYNC_FLAGS));
port->port.close_delay = tmp.close_delay;
port->port.closing_wait = tmp.closing_wait;
port->custom_divisor = tmp.custom_divisor;
}
- if (change_speed) {
+ if (change_speed)
sx_change_speed(bp, port);
- }
+
func_exit();
unlock_kernel();
return 0;
}
-static inline int sx_get_serial_info(struct specialix_port * port,
+static int sx_get_serial_info(struct specialix_port *port,
struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
}
-static int sx_ioctl(struct tty_struct * tty, struct file * filp,
- unsigned int cmd, unsigned long arg)
+static int sx_ioctl(struct tty_struct *tty, struct file *filp,
+ unsigned int cmd, unsigned long arg)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
- int retval;
void __user *argp = (void __user *)arg;
func_enter();
}
switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval) {
- func_exit();
- return retval;
- }
- tty_wait_until_sent(tty, 0);
- if (!arg)
- sx_send_break(port, HZ/4); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval) {
- func_exit();
- return retval;
- }
- tty_wait_until_sent(tty, 0);
- sx_send_break(port, arg ? arg*(HZ/10) : HZ/4);
+ case TIOCGSERIAL:
func_exit();
- return 0;
- case TIOCGSERIAL:
- func_exit();
return sx_get_serial_info(port, argp);
- case TIOCSSERIAL:
- func_exit();
+ case TIOCSSERIAL:
+ func_exit();
return sx_set_serial_info(port, argp);
- default:
- func_exit();
+ default:
+ func_exit();
return -ENOIOCTLCMD;
}
func_exit();
}
-static void sx_throttle(struct tty_struct * tty)
+static void sx_throttle(struct tty_struct *tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
bp = port_Board(port);
/* Use DTR instead of RTS ! */
- if (SX_CRTSCTS (tty))
+ if (sx_crtscts(tty))
port->MSVR &= ~MSVR_DTR;
else {
/* Auch!!! I think the system shouldn't call this then. */
/* Or maybe we're supposed (allowed?) to do our side of hw
handshake anyway, even when hardware handshake is off.
When you see this in your logs, please report.... */
- printk (KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n",
- port_No (port));
+ printk(KERN_ERR
+ "sx%d: Need to throttle, but can't (hardware hs is off)\n",
+ port_No(port));
}
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
}
-static void sx_unthrottle(struct tty_struct * tty)
+static void sx_unthrottle(struct tty_struct *tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
spin_lock_irqsave(&port->lock, flags);
/* XXXX Use DTR INSTEAD???? */
- if (SX_CRTSCTS(tty)) {
+ if (sx_crtscts(tty))
port->MSVR |= MSVR_DTR;
- } /* Else clause: see remark in "sx_throttle"... */
+ /* Else clause: see remark in "sx_throttle"... */
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
spin_unlock_irqrestore(&bp->lock, flags);
}
-static void sx_stop(struct tty_struct * tty)
+static void sx_stop(struct tty_struct *tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
}
-static void sx_start(struct tty_struct * tty)
+static void sx_start(struct tty_struct *tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
func_exit();
}
-static void sx_hangup(struct tty_struct * tty)
+static void sx_hangup(struct tty_struct *tty)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
struct specialix_board *bp;
spin_lock_irqsave(&port->lock, flags);
bp->count -= port->port.count;
if (bp->count < 0) {
- printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n",
- board_No(bp), bp->count, tty->index);
+ printk(KERN_ERR
+ "sx%d: sx_hangup: bad board count: %d port: %d\n",
+ board_No(bp), bp->count, tty->index);
bp->count = 0;
}
port->port.count = 0;
}
-static void sx_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
+static void sx_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
- struct specialix_board * bp;
+ struct specialix_board *bp;
if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
return;
.hangup = sx_hangup,
.tiocmget = sx_tiocmget,
.tiocmset = sx_tiocmset,
+ .break_ctl = sx_send_break,
};
static int sx_init_drivers(void)
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
specialix_driver->init_termios.c_ispeed = 9600;
specialix_driver->init_termios.c_ospeed = 9600;
- specialix_driver->flags = TTY_DRIVER_REAL_RAW;
+ specialix_driver->flags = TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_HARDWARE_BREAK;
tty_set_operations(specialix_driver, &sx_ops);
- if ((error = tty_register_driver(specialix_driver))) {
+ error = tty_register_driver(specialix_driver);
+ if (error) {
put_tty_driver(specialix_driver);
- printk(KERN_ERR "sx: Couldn't register specialix IO8+ driver, error = %d\n",
- error);
+ printk(KERN_ERR
+ "sx: Couldn't register specialix IO8+ driver, error = %d\n",
+ error);
func_exit();
return 1;
}
printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
-#ifdef CONFIG_SPECIALIX_RTSCTS
- printk (KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
-#else
- printk (KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
-#endif
+ if (sx_rtscts)
+ printk(KERN_INFO
+ "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
+ else
+ printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
for (i = 0; i < SX_NBOARD; i++)
spin_lock_init(&sx_board[i].lock);
{
struct pci_dev *pdev = NULL;
- i=0;
+ i = 0;
while (i < SX_NBOARD) {
if (sx_board[i].flags & SX_BOARD_PRESENT) {
i++;
continue;
}
- pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
- PCI_DEVICE_ID_SPECIALIX_IO8,
- pdev);
- if (!pdev) break;
+ pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX,
+ PCI_DEVICE_ID_SPECIALIX_IO8, pdev);
+ if (!pdev)
+ break;
if (pci_enable_device(pdev))
continue;
sx_board[i].irq = pdev->irq;
- sx_board[i].base = pci_resource_start (pdev, 2);
+ sx_board[i].base = pci_resource_start(pdev, 2);
sx_board[i].flags |= SX_BOARD_IS_PCI;
if (!sx_probe(&sx_board[i]))
- found ++;
+ found++;
}
/* May exit pci_get sequence early with lots of boards */
if (pdev != NULL)
}
static int iobase[SX_NBOARD] = {0,};
-
-static int irq [SX_NBOARD] = {0,};
+static int irq[SX_NBOARD] = {0,};
module_param_array(iobase, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param(sx_debug, int, 0);
+module_param(sx_rtscts, int, 0);
module_param(sx_rxfifo, int, 0);
-#ifdef SPECIALIX_TIMER
-module_param(sx_poll, int, 0);
-#endif
/*
* You can setup up to 4 boards.
func_enter();
if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) {
- for(i = 0; i < SX_NBOARD; i++) {
+ for (i = 0; i < SX_NBOARD; i++) {
sx_board[i].base = iobase[i];
sx_board[i].irq = irq[i];
- sx_board[i].count= 0;
+ sx_board[i].count = 0;
}
}
for (i = 0; i < SX_NBOARD; i++)
if (sx_board[i].flags & SX_BOARD_PRESENT)
sx_release_io_range(&sx_board[i]);
-#ifdef SPECIALIX_TIMER
- del_timer_sync(&missed_irq_timer);
-#endif
-
func_exit();
}
git.openpandora.org / pandora-kernel.git / blobdiff