Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
[pandora-kernel.git] / drivers / char / scx200_gpio.c
index e6e52c4..b956c7b 100644 (file)
@@ -5,7 +5,6 @@
 
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> */
 
-#include <linux/config.h>
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/module.h>
 #include <linux/cdev.h>
 
 #include <linux/scx200_gpio.h>
+#include <linux/nsc_gpio.h>
 
-#define NAME "scx200_gpio"
-#define DEVNAME NAME
+#define DRVNAME "scx200_gpio"
 
 static struct platform_device *pdev;
 
 MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi/AMD SCx200 GPIO Pin Driver");
 MODULE_LICENSE("GPL");
 
 static int major = 0;          /* default to dynamic major */
 module_param(major, int, 0);
 MODULE_PARM_DESC(major, "Major device number");
 
-extern void scx200_gpio_dump(unsigned index);
+#define MAX_PINS 32            /* 64 later, when known ok */
 
-static ssize_t scx200_gpio_write(struct file *file, const char __user *data,
-                                size_t len, loff_t *ppos)
-{
-       unsigned m = iminor(file->f_dentry->d_inode);
-       size_t i;
-
-       for (i = 0; i < len; ++i) {
-               char c;
-               if (get_user(c, data + i))
-                       return -EFAULT;
-               switch (c) {
-               case '0':
-                       scx200_gpio_set(m, 0);
-                       break;
-               case '1':
-                       scx200_gpio_set(m, 1);
-                       break;
-               case 'O':
-                       printk(KERN_INFO NAME ": GPIO%d output enabled\n", m);
-                       scx200_gpio_configure(m, ~1, 1);
-                       break;
-               case 'o':
-                       printk(KERN_INFO NAME ": GPIO%d output disabled\n", m);
-                       scx200_gpio_configure(m, ~1, 0);
-                       break;
-               case 'T':
-                       printk(KERN_INFO NAME ": GPIO%d output is push pull\n", m);
-                       scx200_gpio_configure(m, ~2, 2);
-                       break;
-               case 't':
-                       printk(KERN_INFO NAME ": GPIO%d output is open drain\n", m);
-                       scx200_gpio_configure(m, ~2, 0);
-                       break;
-               case 'P':
-                       printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m);
-                       scx200_gpio_configure(m, ~4, 4);
-                       break;
-               case 'p':
-                       printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m);
-                       scx200_gpio_configure(m, ~4, 0);
-                       break;
-               }
-       }
-
-       return len;
-}
-
-static ssize_t scx200_gpio_read(struct file *file, char __user *buf,
-                               size_t len, loff_t *ppos)
-{
-       unsigned m = iminor(file->f_dentry->d_inode);
-       int value;
-
-       value = scx200_gpio_get(m);
-       if (put_user(value ? '1' : '0', buf))
-               return -EFAULT;
-
-       return 1;
-}
+struct nsc_gpio_ops scx200_gpio_ops = {
+       .owner          = THIS_MODULE,
+       .gpio_config    = scx200_gpio_configure,
+       .gpio_dump      = nsc_gpio_dump,
+       .gpio_get       = scx200_gpio_get,
+       .gpio_set       = scx200_gpio_set,
+       .gpio_change    = scx200_gpio_change,
+       .gpio_current   = scx200_gpio_current
+};
+EXPORT_SYMBOL(scx200_gpio_ops);
 
 static int scx200_gpio_open(struct inode *inode, struct file *file)
 {
        unsigned m = iminor(inode);
-       if (m > 63)
+       file->private_data = &scx200_gpio_ops;
+
+       if (m >= MAX_PINS)
                return -EINVAL;
        return nonseekable_open(inode, file);
 }
@@ -109,30 +61,28 @@ static int scx200_gpio_release(struct inode *inode, struct file *file)
        return 0;
 }
 
-
-static struct file_operations scx200_gpio_fops = {
+static const struct file_operations scx200_gpio_fileops = {
        .owner   = THIS_MODULE,
-       .write   = scx200_gpio_write,
-       .read    = scx200_gpio_read,
+       .write   = nsc_gpio_write,
+       .read    = nsc_gpio_read,
        .open    = scx200_gpio_open,
        .release = scx200_gpio_release,
 };
 
-struct cdev *scx200_devices;
-static int num_pins = 32;
+struct cdev scx200_gpio_cdev;  /* use 1 cdev for all pins */
 
 static int __init scx200_gpio_init(void)
 {
-       int rc, i;
-       dev_t dev = MKDEV(major, 0);
+       int rc;
+       dev_t devid;
 
        if (!scx200_gpio_present()) {
-               printk(KERN_ERR NAME ": no SCx200 gpio present\n");
+               printk(KERN_ERR DRVNAME ": no SCx200 gpio present\n");
                return -ENODEV;
        }
 
        /* support dev_dbg() with pdev->dev */
-       pdev = platform_device_alloc(DEVNAME, 0);
+       pdev = platform_device_alloc(DRVNAME, 0);
        if (!pdev)
                return -ENOMEM;
 
@@ -140,49 +90,41 @@ static int __init scx200_gpio_init(void)
        if (rc)
                goto undo_malloc;
 
-       if (major)
-               rc = register_chrdev_region(dev, num_pins, "scx200_gpio");
-       else {
-               rc = alloc_chrdev_region(&dev, 0, num_pins, "scx200_gpio");
-               major = MAJOR(dev);
+       /* nsc_gpio uses dev_dbg(), so needs this */
+       scx200_gpio_ops.dev = &pdev->dev;
+
+       if (major) {
+               devid = MKDEV(major, 0);
+               rc = register_chrdev_region(devid, MAX_PINS, "scx200_gpio");
+       } else {
+               rc = alloc_chrdev_region(&devid, 0, MAX_PINS, "scx200_gpio");
+               major = MAJOR(devid);
        }
        if (rc < 0) {
                dev_err(&pdev->dev, "SCx200 chrdev_region err: %d\n", rc);
                goto undo_platform_device_add;
        }
-       scx200_devices = kzalloc(num_pins * sizeof(struct cdev), GFP_KERNEL);
-       if (!scx200_devices) {
-               rc = -ENOMEM;
-               goto undo_chrdev_region;
-       }
-       for (i = 0; i < num_pins; i++) {
-               struct cdev *cdev = &scx200_devices[i];
-               cdev_init(cdev, &scx200_gpio_fops);
-               cdev->owner = THIS_MODULE;
-               rc = cdev_add(cdev, MKDEV(major, i), 1);
-               /* tolerate 'minor' errors */
-               if (rc)
-                       dev_err(&pdev->dev, "Error %d on minor %d", rc, i);
-       }
+
+       cdev_init(&scx200_gpio_cdev, &scx200_gpio_fileops);
+       cdev_add(&scx200_gpio_cdev, devid, MAX_PINS);
 
        return 0; /* succeed */
 
-undo_chrdev_region:
-       unregister_chrdev_region(dev, num_pins);
 undo_platform_device_add:
-       platform_device_put(pdev);
+       platform_device_del(pdev);
 undo_malloc:
-       kfree(pdev);
+       platform_device_put(pdev);
+
        return rc;
 }
 
 static void __exit scx200_gpio_cleanup(void)
 {
-       kfree(scx200_devices);
-       unregister_chrdev_region(MKDEV(major, 0), num_pins);
-       platform_device_put(pdev);
+       cdev_del(&scx200_gpio_cdev);
+       /* cdev_put(&scx200_gpio_cdev); */
+
+       unregister_chrdev_region(MKDEV(major, 0), MAX_PINS);
        platform_device_unregister(pdev);
-       /* kfree(pdev); */
 }
 
 module_init(scx200_gpio_init);