** -----------------------------------------------------------------------------
*/
-#ifdef SCCS_LABELS
-static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3";
-#endif
-
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
func_enter();
- TtyP = PortP->gs.tty;
+ TtyP = PortP->gs.port.tty;
rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP);
}
rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (cmd == OPEN) {
+ if (cmd == RIOC_OPEN) {
/*
** If the port is set to store or lock the parameters, and it is
** paramed with OPEN, we want to restore the saved port termio, but
case CS5:
{
rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n");
- Cor1 |= COR1_5BITS;
+ Cor1 |= RIOC_COR1_5BITS;
break;
}
case CS6:
{
rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n");
- Cor1 |= COR1_6BITS;
+ Cor1 |= RIOC_COR1_6BITS;
break;
}
case CS7:
{
rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n");
- Cor1 |= COR1_7BITS;
+ Cor1 |= RIOC_COR1_7BITS;
break;
}
case CS8:
{
rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n");
- Cor1 |= COR1_8BITS;
+ Cor1 |= RIOC_COR1_8BITS;
break;
}
}
if (TtyP->termios->c_cflag & CSTOPB) {
rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n");
- Cor1 |= COR1_2STOP;
+ Cor1 |= RIOC_COR1_2STOP;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n");
- Cor1 |= COR1_1STOP;
+ Cor1 |= RIOC_COR1_1STOP;
}
if (TtyP->termios->c_cflag & PARENB) {
rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n");
- Cor1 |= COR1_NORMAL;
+ Cor1 |= RIOC_COR1_NORMAL;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n");
- Cor1 |= COR1_NOP;
+ Cor1 |= RIOC_COR1_NOP;
}
if (TtyP->termios->c_cflag & PARODD) {
rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n");
- Cor1 |= COR1_ODD;
+ Cor1 |= RIOC_COR1_ODD;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n");
- Cor1 |= COR1_EVEN;
+ Cor1 |= RIOC_COR1_EVEN;
}
/*
*/
if (TtyP->termios->c_iflag & IXON) {
rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n");
- Cor2 |= COR2_IXON;
+ Cor2 |= RIOC_COR2_IXON;
} else {
if (PortP->Config & RIO_IXON) {
rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n");
- Cor2 |= COR2_IXON;
+ Cor2 |= RIOC_COR2_IXON;
} else
rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n");
}
if (TtyP->termios->c_iflag & IXANY) {
if (PortP->Config & RIO_IXANY) {
rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n");
- Cor2 |= COR2_IXANY;
+ Cor2 |= RIOC_COR2_IXANY;
} else
rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n");
}
if (TtyP->termios->c_iflag & IXOFF) {
rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n");
- Cor2 |= COR2_IXOFF;
+ Cor2 |= RIOC_COR2_IXOFF;
}
if (TtyP->termios->c_cflag & HUPCL) {
rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n");
- Cor2 |= COR2_HUPCL;
+ Cor2 |= RIOC_COR2_HUPCL;
}
if (C_CRTSCTS(TtyP)) {
rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n");
- Cor2 |= COR2_CTSFLOW;
- Cor2 |= COR2_RTSFLOW;
+ Cor2 |= RIOC_COR2_CTSFLOW;
+ Cor2 |= RIOC_COR2_RTSFLOW;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n");
- Cor2 &= ~COR2_CTSFLOW;
- Cor2 &= ~COR2_RTSFLOW;
+ Cor2 &= ~RIOC_COR2_CTSFLOW;
+ Cor2 &= ~RIOC_COR2_RTSFLOW;
}
*/
if (TtyP->termios->c_iflag & IGNBRK) {
rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n");
- Cor4 |= COR4_IGNBRK;
+ Cor4 |= RIOC_COR4_IGNBRK;
}
if (!(TtyP->termios->c_iflag & BRKINT)) {
rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n");
- Cor4 |= COR4_NBRKINT;
+ Cor4 |= RIOC_COR4_NBRKINT;
} else {
rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on break condition\n");
}
if (TtyP->termios->c_iflag & INLCR) {
rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n");
- Cor4 |= COR4_INLCR;
+ Cor4 |= RIOC_COR4_INLCR;
}
if (TtyP->termios->c_iflag & IGNCR) {
rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n");
- Cor4 |= COR4_IGNCR;
+ Cor4 |= RIOC_COR4_IGNCR;
}
if (TtyP->termios->c_iflag & ICRNL) {
rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n");
- Cor4 |= COR4_ICRNL;
+ Cor4 |= RIOC_COR4_ICRNL;
}
if (TtyP->termios->c_iflag & IGNPAR) {
rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n");
- Cor4 |= COR4_IGNPAR;
+ Cor4 |= RIOC_COR4_IGNPAR;
}
if (TtyP->termios->c_iflag & PARMRK) {
rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n");
- Cor4 |= COR4_PARMRK;
+ Cor4 |= RIOC_COR4_PARMRK;
}
/*
** on reception of a config packet.
** The download code handles the zero baud condition.
*/
- Cor4 |= COR4_RAISEMOD;
+ Cor4 |= RIOC_COR4_RAISEMOD;
/*
** COR 5
*/
- Cor5 = COR5_CMOE;
+ Cor5 = RIOC_COR5_CMOE;
/*
** Set to monitor tbusy/tstop (or not).
*/
if (PortP->MonitorTstate)
- Cor5 |= COR5_TSTATE_ON;
+ Cor5 |= RIOC_COR5_TSTATE_ON;
else
- Cor5 |= COR5_TSTATE_OFF;
+ Cor5 |= RIOC_COR5_TSTATE_OFF;
/*
** Could set LNE here if you wanted LNext processing. SVR4 will use it.
if (TtyP->termios->c_iflag & ISTRIP) {
rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n");
if (!(PortP->State & RIO_TRIAD_MODE)) {
- Cor5 |= COR5_ISTRIP;
+ Cor5 |= RIOC_COR5_ISTRIP;
}
}
if (TtyP->termios->c_oflag & ONLCR) {
rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n");
if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= COR5_ONLCR;
+ Cor5 |= RIOC_COR5_ONLCR;
}
if (TtyP->termios->c_oflag & OCRNL) {
rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n");
if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= COR5_OCRNL;
+ Cor5 |= RIOC_COR5_OCRNL;
}
if ((TtyP->termios->c_oflag & TABDLY) == TAB3) {
rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n");
if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= COR5_TAB3;
+ Cor5 |= RIOC_COR5_TAB3;
}
/*
git.openpandora.org / pandora-kernel.git / blobdiff