* Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
* <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
* - Fixed x86_64 cleanness
- * - Fixed sleep with spinlock held in mxser_send_break
*/
#include <linux/module.h>
#define MXSER_VERSION "2.0.4" /* 1.12 */
#define MXSERMAJOR 174
-#define MXSERCUMAJOR 175
#define MXSER_BOARDS 4 /* Max. boards */
#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
#define MXSER_ISR_PASS_LIMIT 100
-#define MXSER_ERR_IOADDR -1
-#define MXSER_ERR_IRQ -2
-#define MXSER_ERR_IRQ_CONFLIT -3
-#define MXSER_ERR_VECTOR -4
-
/*CheckIsMoxaMust return value*/
#define MOXA_OTHER_UART 0x00
#define MOXA_MUST_MU150_HWID 0x01
};
MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
-static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
+static unsigned long ioaddr[MXSER_BOARDS];
static int ttymajor = MXSERMAJOR;
/* Variables for insmod */
MODULE_AUTHOR("Casper Yang");
MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
-module_param_array(ioaddr, int, NULL, 0);
+module_param_array(ioaddr, ulong, NULL, 0);
+MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
module_param(ttymajor, int, 0);
MODULE_LICENSE("GPL");
unsigned long txcnt[MXSER_PORTS];
};
-
struct mxser_mon {
unsigned long rxcnt;
unsigned long txcnt;
int dcd;
};
-static struct mxser_mstatus GMStatus[MXSER_PORTS];
-
-static int mxserBoardCAP[MXSER_BOARDS] = {
- 0, 0, 0, 0
- /* 0x180, 0x280, 0x200, 0x320 */
-};
-
static struct mxser_board mxser_boards[MXSER_BOARDS];
static struct tty_driver *mxvar_sdriver;
static struct mxser_log mxvar_log;
-static int mxvar_diagflag;
-static unsigned char mxser_msr[MXSER_PORTS + 1];
-static struct mxser_mon_ext mon_data_ext;
static int mxser_set_baud_method[MXSER_PORTS + 1];
static void mxser_enable_must_enchance_mode(unsigned long baseio)
static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
{
+ static unsigned char mxser_msr[MXSER_PORTS + 1];
unsigned char status = 0;
status = inb(baseaddr + UART_MSR);
struct mxser_port *info = tty->driver_data;
unsigned long flags;
- if (info->xmit_cnt <= 0 ||
- tty->stopped ||
- !info->port.xmit_buf ||
- (tty->hw_stopped &&
- (info->type != PORT_16550A) &&
- (!info->board->chip_flag)
- ))
+ if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf ||
+ (tty->hw_stopped && info->type != PORT_16550A &&
+ !info->board->chip_flag))
return;
spin_lock_irqsave(&info->slock, flags);
int ret;
ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
+ return ret < 0 ? 0 : ret;
}
static int mxser_chars_in_buffer(struct tty_struct *tty)
switch (cmd) {
case MOXA_GET_MAJOR:
+ if (printk_ratelimit())
+ printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+ "%x (GET_MAJOR), fix your userspace\n",
+ current->comm, cmd);
return put_user(ttymajor, (int __user *)argp);
case MOXA_CHKPORTENABLE:
ret = -EFAULT;
unlock_kernel();
return ret;
- case MOXA_GETMSTATUS:
+ case MOXA_GETMSTATUS: {
+ struct mxser_mstatus ms, __user *msu = argp;
lock_kernel();
for (i = 0; i < MXSER_BOARDS; i++)
for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
port = &mxser_boards[i].ports[j];
+ memset(&ms, 0, sizeof(ms));
- GMStatus[i].ri = 0;
- if (!port->ioaddr) {
- GMStatus[i].dcd = 0;
- GMStatus[i].dsr = 0;
- GMStatus[i].cts = 0;
- continue;
- }
+ if (!port->ioaddr)
+ goto copy;
if (!port->port.tty || !port->port.tty->termios)
- GMStatus[i].cflag =
- port->normal_termios.c_cflag;
+ ms.cflag = port->normal_termios.c_cflag;
else
- GMStatus[i].cflag =
- port->port.tty->termios->c_cflag;
+ ms.cflag = port->port.tty->termios->c_cflag;
status = inb(port->ioaddr + UART_MSR);
- if (status & 0x80 /*UART_MSR_DCD */ )
- GMStatus[i].dcd = 1;
- else
- GMStatus[i].dcd = 0;
-
- if (status & 0x20 /*UART_MSR_DSR */ )
- GMStatus[i].dsr = 1;
- else
- GMStatus[i].dsr = 0;
-
-
- if (status & 0x10 /*UART_MSR_CTS */ )
- GMStatus[i].cts = 1;
- else
- GMStatus[i].cts = 0;
+ if (status & UART_MSR_DCD)
+ ms.dcd = 1;
+ if (status & UART_MSR_DSR)
+ ms.dsr = 1;
+ if (status & UART_MSR_CTS)
+ ms.cts = 1;
+ copy:
+ if (copy_to_user(msu, &ms, sizeof(ms))) {
+ unlock_kernel();
+ return -EFAULT;
+ }
+ msu++;
}
unlock_kernel();
- if (copy_to_user(argp, GMStatus,
- sizeof(struct mxser_mstatus) * MXSER_PORTS))
- return -EFAULT;
return 0;
+ }
case MOXA_ASPP_MON_EXT: {
- int p, shiftbit;
- unsigned long opmode;
- unsigned cflag, iflag;
+ struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */
+ unsigned int cflag, iflag, p;
+ u8 opmode;
+
+ me = kzalloc(sizeof(*me), GFP_KERNEL);
+ if (!me)
+ return -ENOMEM;
lock_kernel();
- for (i = 0; i < MXSER_BOARDS; i++) {
- for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+ for (i = 0, p = 0; i < MXSER_BOARDS; i++) {
+ for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) {
+ if (p >= ARRAY_SIZE(me->rx_cnt)) {
+ i = MXSER_BOARDS;
+ break;
+ }
port = &mxser_boards[i].ports[j];
if (!port->ioaddr)
continue;
- status = mxser_get_msr(port->ioaddr, 0, i);
+ status = mxser_get_msr(port->ioaddr, 0, p);
if (status & UART_MSR_TERI)
port->icount.rng++;
port->icount.cts++;
port->mon_data.modem_status = status;
- mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt;
- mon_data_ext.tx_cnt[i] = port->mon_data.txcnt;
- mon_data_ext.up_rxcnt[i] =
- port->mon_data.up_rxcnt;
- mon_data_ext.up_txcnt[i] =
- port->mon_data.up_txcnt;
- mon_data_ext.modem_status[i] =
+ me->rx_cnt[p] = port->mon_data.rxcnt;
+ me->tx_cnt[p] = port->mon_data.txcnt;
+ me->up_rxcnt[p] = port->mon_data.up_rxcnt;
+ me->up_txcnt[p] = port->mon_data.up_txcnt;
+ me->modem_status[p] =
port->mon_data.modem_status;
- mon_data_ext.baudrate[i] =
- tty_get_baud_rate(port->port.tty);
+ me->baudrate[p] = tty_get_baud_rate(port->port.tty);
if (!port->port.tty || !port->port.tty->termios) {
cflag = port->normal_termios.c_cflag;
iflag = port->port.tty->termios->c_iflag;
}
- mon_data_ext.databits[i] = cflag & CSIZE;
-
- mon_data_ext.stopbits[i] = cflag & CSTOPB;
-
- mon_data_ext.parity[i] =
- cflag & (PARENB | PARODD | CMSPAR);
-
- mon_data_ext.flowctrl[i] = 0x00;
+ me->databits[p] = cflag & CSIZE;
+ me->stopbits[p] = cflag & CSTOPB;
+ me->parity[p] = cflag & (PARENB | PARODD |
+ CMSPAR);
if (cflag & CRTSCTS)
- mon_data_ext.flowctrl[i] |= 0x03;
+ me->flowctrl[p] |= 0x03;
if (iflag & (IXON | IXOFF))
- mon_data_ext.flowctrl[i] |= 0x0C;
+ me->flowctrl[p] |= 0x0C;
if (port->type == PORT_16550A)
- mon_data_ext.fifo[i] = 1;
- else
- mon_data_ext.fifo[i] = 0;
+ me->fifo[p] = 1;
- p = i % 4;
- shiftbit = p * 2;
- opmode = inb(port->opmode_ioaddr) >> shiftbit;
+ opmode = inb(port->opmode_ioaddr) >>
+ ((p % 4) * 2);
opmode &= OP_MODE_MASK;
-
- mon_data_ext.iftype[i] = opmode;
-
+ me->iftype[p] = opmode;
}
}
unlock_kernel();
- if (copy_to_user(argp, &mon_data_ext,
- sizeof(mon_data_ext)))
- return -EFAULT;
- return 0;
+ if (copy_to_user(argp, me, sizeof(*me)))
+ ret = -EFAULT;
+ kfree(me);
+ return ret;
}
default:
return -ENOIOCTLCMD;
{
struct mxser_port *info = tty->driver_data;
struct async_icount cnow;
- struct serial_icounter_struct __user *p_cuser;
unsigned long flags;
void __user *argp = (void __user *)arg;
int retval;
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
- case TIOCGICOUNT:
+ case TIOCGICOUNT: {
+ struct serial_icounter_struct icnt = { 0 };
spin_lock_irqsave(&info->slock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->slock, flags);
- p_cuser = argp;
- if (put_user(cnow.frame, &p_cuser->frame))
- return -EFAULT;
- if (put_user(cnow.brk, &p_cuser->brk))
- return -EFAULT;
- if (put_user(cnow.overrun, &p_cuser->overrun))
- return -EFAULT;
- if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- return -EFAULT;
- if (put_user(cnow.parity, &p_cuser->parity))
- return -EFAULT;
- if (put_user(cnow.rx, &p_cuser->rx))
- return -EFAULT;
- if (put_user(cnow.tx, &p_cuser->tx))
- return -EFAULT;
- put_user(cnow.cts, &p_cuser->cts);
- put_user(cnow.dsr, &p_cuser->dsr);
- put_user(cnow.rng, &p_cuser->rng);
- put_user(cnow.dcd, &p_cuser->dcd);
- return 0;
+
+ icnt.frame = cnow.frame;
+ icnt.brk = cnow.brk;
+ icnt.overrun = cnow.overrun;
+ icnt.buf_overrun = cnow.buf_overrun;
+ icnt.parity = cnow.parity;
+ icnt.rx = cnow.rx;
+ icnt.tx = cnow.tx;
+ icnt.cts = cnow.cts;
+ icnt.dsr = cnow.dsr;
+ icnt.rng = cnow.rng;
+ icnt.dcd = cnow.dcd;
+
+ return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
+ }
case MOXA_HighSpeedOn:
return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
case MOXA_SDS_RSTICOUNTER:
unsigned int i;
int retval;
- printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud);
+ printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
+ brd->ports[0].max_baud);
for (i = 0; i < brd->info->nports; i++) {
info = &brd->ports[i];
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
if (irq != (regs[9] & 0xFF00))
- return MXSER_ERR_IRQ_CONFLIT;
+ goto err_irqconflict;
} else if (brd->info->nports == 4) {
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
irq = irq | (irq >> 8);
if (irq != regs[9])
- return MXSER_ERR_IRQ_CONFLIT;
+ goto err_irqconflict;
} else if (brd->info->nports == 8) {
irq = regs[9] & 0xF000;
irq = irq | (irq >> 4);
irq = irq | (irq >> 8);
if ((irq != regs[9]) || (irq != regs[10]))
- return MXSER_ERR_IRQ_CONFLIT;
+ goto err_irqconflict;
}
- if (!irq)
- return MXSER_ERR_IRQ;
+ if (!irq) {
+ printk(KERN_ERR "mxser: interrupt number unset\n");
+ return -EIO;
+ }
brd->irq = ((int)(irq & 0xF000) >> 12);
for (i = 0; i < 8; i++)
brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
- if ((regs[12] & 0x80) == 0)
- return MXSER_ERR_VECTOR;
+ if ((regs[12] & 0x80) == 0) {
+ printk(KERN_ERR "mxser: invalid interrupt vector\n");
+ return -EIO;
+ }
brd->vector = (int)regs[11]; /* interrupt vector */
if (id == 1)
brd->vector_mask = 0x00FF;
else
brd->uart_type = PORT_16450;
if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
- "mxser(IO)"))
- return MXSER_ERR_IOADDR;
+ "mxser(IO)")) {
+ printk(KERN_ERR "mxser: can't request ports I/O region: "
+ "0x%.8lx-0x%.8lx\n",
+ brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+ 8 * brd->info->nports - 1);
+ return -EIO;
+ }
if (!request_region(brd->vector, 1, "mxser(vector)")) {
release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- return MXSER_ERR_VECTOR;
+ printk(KERN_ERR "mxser: can't request interrupt vector region: "
+ "0x%.8lx-0x%.8lx\n",
+ brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+ 8 * brd->info->nports - 1);
+ return -EIO;
}
return brd->info->nports;
+
+err_irqconflict:
+ printk(KERN_ERR "mxser: invalid interrupt number\n");
+ return -EIO;
}
static int __devinit mxser_probe(struct pci_dev *pdev,
break;
if (i >= MXSER_BOARDS) {
- printk(KERN_ERR "Too many Smartio/Industio family boards found "
- "(maximum %d), board not configured\n", MXSER_BOARDS);
+ dev_err(&pdev->dev, "too many boards found (maximum %d), board "
+ "not configured\n", MXSER_BOARDS);
goto err;
}
brd = &mxser_boards[i];
brd->idx = i * MXSER_PORTS_PER_BOARD;
- printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n",
+ dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
mxser_cards[ent->driver_data].name,
pdev->bus->number, PCI_SLOT(pdev->devfn));
retval = pci_enable_device(pdev);
if (retval) {
- printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
+ dev_err(&pdev->dev, "PCI enable failed\n");
goto err;
}
static int __init mxser_module_init(void)
{
struct mxser_board *brd;
- unsigned long cap;
- unsigned int i, m, isaloop;
- int retval, b;
-
- pr_debug("Loading module mxser ...\n");
+ unsigned int b, i, m;
+ int retval;
mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
if (!mxvar_sdriver)
goto err_put;
}
- mxvar_diagflag = 0;
-
- m = 0;
/* Start finding ISA boards here */
- for (isaloop = 0; isaloop < 2; isaloop++)
- for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
- if (!isaloop)
- cap = mxserBoardCAP[b]; /* predefined */
- else
- cap = ioaddr[b]; /* module param */
-
- if (!cap)
- continue;
+ for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
+ if (!ioaddr[b])
+ continue;
+
+ brd = &mxser_boards[m];
+ retval = mxser_get_ISA_conf(!ioaddr[b], brd);
+ if (retval <= 0) {
+ brd->info = NULL;
+ continue;
+ }
- brd = &mxser_boards[m];
- retval = mxser_get_ISA_conf(cap, brd);
-
- if (retval != 0)
- printk(KERN_INFO "Found MOXA %s board "
- "(CAP=0x%x)\n",
- brd->info->name, ioaddr[b]);
-
- if (retval <= 0) {
- if (retval == MXSER_ERR_IRQ)
- printk(KERN_ERR "Invalid interrupt "
- "number, board not "
- "configured\n");
- else if (retval == MXSER_ERR_IRQ_CONFLIT)
- printk(KERN_ERR "Invalid interrupt "
- "number, board not "
- "configured\n");
- else if (retval == MXSER_ERR_VECTOR)
- printk(KERN_ERR "Invalid interrupt "
- "vector, board not "
- "configured\n");
- else if (retval == MXSER_ERR_IOADDR)
- printk(KERN_ERR "Invalid I/O address, "
- "board not configured\n");
-
- brd->info = NULL;
- continue;
- }
+ printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
+ brd->info->name, ioaddr[b]);
- /* mxser_initbrd will hook ISR. */
- if (mxser_initbrd(brd, NULL) < 0) {
- brd->info = NULL;
- continue;
- }
+ /* mxser_initbrd will hook ISR. */
+ if (mxser_initbrd(brd, NULL) < 0) {
+ brd->info = NULL;
+ continue;
+ }
- brd->idx = m * MXSER_PORTS_PER_BOARD;
- for (i = 0; i < brd->info->nports; i++)
- tty_register_device(mxvar_sdriver, brd->idx + i,
- NULL);
+ brd->idx = m * MXSER_PORTS_PER_BOARD;
+ for (i = 0; i < brd->info->nports; i++)
+ tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
- m++;
- }
+ m++;
+ }
retval = pci_register_driver(&mxser_driver);
if (retval) {
- printk(KERN_ERR "Can't register pci driver\n");
+ printk(KERN_ERR "mxser: can't register pci driver\n");
if (!m) {
retval = -ENODEV;
goto err_unr;
} /* else: we have some ISA cards under control */
}
- pr_debug("Done.\n");
-
return 0;
err_unr:
tty_unregister_driver(mxvar_sdriver);
{
unsigned int i, j;
- pr_debug("Unloading module mxser ...\n");
-
pci_unregister_driver(&mxser_driver);
for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
for (i = 0; i < MXSER_BOARDS; i++)
if (mxser_boards[i].info != NULL)
mxser_release_res(&mxser_boards[i], NULL, 1);
-
- pr_debug("Done.\n");
}
module_init(mxser_module_init);
git.openpandora.org / pandora-kernel.git / blobdiff