*
*/
-#include <linux/config.h> /* CONFIG_PROC_FS */
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/completion.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.10)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,10)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.10");
+MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
" SA6i P600 P800 P400 P400i E200 E200i E500");
+MODULE_VERSION("3.6.14");
MODULE_LICENSE("GPL");
#include "cciss_cmd.h"
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3213},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3233},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237},
+ {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
* access = Address of the struct of function pointers
+ * nr_cmds = Number of commands supported by controller
*/
static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access},
- {0x40800E11, "Smart Array 5i", &SA5B_access},
- {0x40820E11, "Smart Array 532", &SA5B_access},
- {0x40830E11, "Smart Array 5312", &SA5B_access},
- {0x409A0E11, "Smart Array 641", &SA5_access},
- {0x409B0E11, "Smart Array 642", &SA5_access},
- {0x409C0E11, "Smart Array 6400", &SA5_access},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
- {0x40910E11, "Smart Array 6i", &SA5_access},
- {0x3225103C, "Smart Array P600", &SA5_access},
- {0x3223103C, "Smart Array P800", &SA5_access},
- {0x3234103C, "Smart Array P400", &SA5_access},
- {0x3235103C, "Smart Array P400i", &SA5_access},
- {0x3211103C, "Smart Array E200i", &SA5_access},
- {0x3212103C, "Smart Array E200", &SA5_access},
- {0x3213103C, "Smart Array E200i", &SA5_access},
- {0x3214103C, "Smart Array E200i", &SA5_access},
- {0x3215103C, "Smart Array E200i", &SA5_access},
- {0x3233103C, "Smart Array E500", &SA5_access},
+ {0x40700E11, "Smart Array 5300", &SA5_access, 512},
+ {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
+ {0x40820E11, "Smart Array 532", &SA5B_access, 512},
+ {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
+ {0x409A0E11, "Smart Array 641", &SA5_access, 512},
+ {0x409B0E11, "Smart Array 642", &SA5_access, 512},
+ {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
+ {0x40910E11, "Smart Array 6i", &SA5_access, 512},
+ {0x3225103C, "Smart Array P600", &SA5_access, 512},
+ {0x3223103C, "Smart Array P800", &SA5_access, 512},
+ {0x3234103C, "Smart Array P400", &SA5_access, 512},
+ {0x3235103C, "Smart Array P400i", &SA5_access, 512},
+ {0x3211103C, "Smart Array E200i", &SA5_access, 120},
+ {0x3212103C, "Smart Array E200", &SA5_access, 120},
+ {0x3213103C, "Smart Array E200i", &SA5_access, 120},
+ {0x3214103C, "Smart Array E200i", &SA5_access, 120},
+ {0x3215103C, "Smart Array E200i", &SA5_access, 120},
+ {0x3237103C, "Smart Array E500", &SA5_access, 512},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
#define MAX_CMD_RETRIES 3
#define READ_AHEAD 1024
-#define NR_CMDS 384 /* #commands that can be outstanding */
#define MAX_CTLR 32
/* Originally cciss driver only supports 8 major numbers */
static ctlr_info_t *hba[MAX_CTLR];
static void do_cciss_request(request_queue_t *q);
-static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t do_cciss_intr(int irq, void *dev_id);
static int cciss_open(struct inode *inode, struct file *filep);
static int cciss_release(struct inode *inode, struct file *filep);
static int cciss_ioctl(struct inode *inode, struct file *filep,
unsigned int cmd, unsigned long arg);
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-static int revalidate_allvol(ctlr_info_t *host);
static int cciss_revalidate(struct gendisk *disk);
static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
"Firmware Version: %c%c%c%c\n"
"IRQ: %d\n"
"Logical drives: %d\n"
+ "Max sectors: %d\n"
"Current Q depth: %d\n"
"Current # commands on controller: %d\n"
"Max Q depth since init: %d\n"
(unsigned long)h->board_id,
h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
- h->num_luns, h->Qdepth, h->commands_outstanding,
+ h->num_luns,
+ h->cciss_max_sectors,
+ h->Qdepth, h->commands_outstanding,
h->maxQsinceinit, h->max_outstanding, h->maxSG);
pos += size;
} else { /* get it out of the controllers pool */
do {
- i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS);
- if (i == NR_CMDS)
+ i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
+ if (i == h->nr_cmds)
return NULL;
} while (test_and_set_bit
(i & (BITS_PER_LONG - 1),
* but I'm already using way to many device nodes to claim another one
* for "raw controller".
*/
- if (drv->nr_blocks == 0) {
+ if (drv->heads == 0) {
if (iminor(inode) != 0) { /* not node 0? */
/* if not node 0 make sure it is a partition = 0 */
if (iminor(inode) & 0x0f) {
}
case CCISS_REVALIDVOLS:
- if (bdev != bdev->bd_contains || drv != host->drv)
- return -ENXIO;
- return revalidate_allvol(host);
+ return rebuild_lun_table(host, NULL);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
}
}
-/*
- * revalidate_allvol is for online array config utilities. After a
- * utility reconfigures the drives in the array, it can use this function
- * (through an ioctl) to make the driver zap any previous disk structs for
- * that controller and get new ones.
- *
- * Right now I'm using the getgeometry() function to do this, but this
- * function should probably be finer grained and allow you to revalidate one
- * particular logical volume (instead of all of them on a particular
- * controller).
- */
-static int revalidate_allvol(ctlr_info_t *host)
-{
- int ctlr = host->ctlr, i;
- unsigned long flags;
-
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- if (host->usage_count > 1) {
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- printk(KERN_WARNING "cciss: Device busy for volume"
- " revalidation (usage=%d)\n", host->usage_count);
- return -EBUSY;
- }
- host->usage_count++;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-
- for (i = 0; i < NWD; i++) {
- struct gendisk *disk = host->gendisk[i];
- if (disk) {
- request_queue_t *q = disk->queue;
-
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- if (q)
- blk_cleanup_queue(q);
- }
- }
-
- /*
- * Set the partition and block size structures for all volumes
- * on this controller to zero. We will reread all of this data
- */
- memset(host->drv, 0, sizeof(drive_info_struct)
- * CISS_MAX_LUN);
- /*
- * Tell the array controller not to give us any interrupts while
- * we check the new geometry. Then turn interrupts back on when
- * we're done.
- */
- host->access.set_intr_mask(host, CCISS_INTR_OFF);
- cciss_getgeometry(ctlr);
- host->access.set_intr_mask(host, CCISS_INTR_ON);
-
- /* Loop through each real device */
- for (i = 0; i < NWD; i++) {
- struct gendisk *disk = host->gendisk[i];
- drive_info_struct *drv = &(host->drv[i]);
- /* we must register the controller even if no disks exist */
- /* this is for the online array utilities */
- if (!drv->heads && i)
- continue;
- blk_queue_hardsect_size(drv->queue, drv->block_size);
- set_capacity(disk, drv->nr_blocks);
- add_disk(disk);
- }
- host->usage_count--;
- return 0;
-}
-
static inline void complete_buffers(struct bio *bio, int status)
{
while (bio) {
* in case the interrupt we serviced was from an ioctl and did not
* free any new commands.
*/
- if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
+ if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds)
return;
/* We have room on the queue for more commands. Now we need to queue
/* check to see if we have maxed out the number of commands
* that can be placed on the queue.
*/
- if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) {
+ if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) {
if (curr_queue == start_queue) {
h->next_to_run =
(start_queue + 1) % (h->highest_lun + 1);
complete_buffers(rq->bio, rq->errors);
+ if (blk_fs_request(rq)) {
+ const int rw = rq_data_dir(rq);
+
+ disk_stat_add(rq->rq_disk, sectors[rw], rq->nr_sectors);
+ }
+
#ifdef CCISS_DEBUG
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
/* if it's the controller it's already added */
if (drv_index) {
disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+ sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
+ disk->major = h->major;
+ disk->first_minor = drv_index << NWD_SHIFT;
+ disk->fops = &cciss_fops;
+ disk->private_data = &h->drv[drv_index];
/* Set up queue information */
disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
/* This is a limit in the driver and could be eliminated. */
blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
- blk_queue_max_sectors(disk->queue, 512);
+ blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
blk_queue_softirq_done(disk->queue, cciss_softirq_done);
/* Set busy_configuring flag for this operation */
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- if (h->num_luns >= CISS_MAX_LUN) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- return -EINVAL;
- }
-
if (h->busy_configuring) {
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
return -EBUSY;
0, 0, TYPE_CMD);
if (return_code == IO_OK) {
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[0]))
- << 24;
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[1]))
- << 16;
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[2]))
- << 8;
- listlength |=
- 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
+ listlength =
+ be32_to_cpu(*(__u32 *) ld_buff->LUNListLength);
} else { /* reading number of logical volumes failed */
printk(KERN_WARNING "cciss: report logical volume"
" command failed\n");
if (drv_index == -1)
goto freeret;
+ /*Check if the gendisk needs to be allocated */
+ if (!h->gendisk[drv_index]){
+ h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
+ if (!h->gendisk[drv_index]){
+ printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
+ goto mem_msg;
+ }
+ }
}
h->drv[drv_index].LunID = lunid;
cciss_update_drive_info(ctlr, drv_index);
static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
int clear_all)
{
+ int i;
ctlr_info_t *h = get_host(disk);
if (!capable(CAP_SYS_RAWIO))
del_gendisk(disk);
if (q) {
blk_cleanup_queue(q);
+ /* Set drv->queue to NULL so that we do not try
+ * to call blk_start_queue on this queue in the
+ * interrupt handler
+ */
drv->queue = NULL;
}
+ /* If clear_all is set then we are deleting the logical
+ * drive, not just refreshing its info. For drives
+ * other than disk 0 we will call put_disk. We do not
+ * do this for disk 0 as we need it to be able to
+ * configure the controller.
+ */
+ if (clear_all){
+ /* This isn't pretty, but we need to find the
+ * disk in our array and NULL our the pointer.
+ * This is so that we will call alloc_disk if
+ * this index is used again later.
+ */
+ for (i=0; i < CISS_MAX_LUN; i++){
+ if(h->gendisk[i] == disk){
+ h->gendisk[i] = NULL;
+ break;
+ }
+ }
+ put_disk(disk);
+ }
}
+ } else {
+ set_capacity(disk, 0);
}
--h->num_luns;
{
int return_code;
unsigned long t;
- unsigned long rem;
memset(inq_buff, 0, sizeof(InquiryData_struct));
if (withirq)
printk(KERN_WARNING
"cciss: reading geometry failed, volume "
"does not support reading geometry\n");
- drv->block_size = block_size;
- drv->nr_blocks = total_size;
drv->heads = 255;
drv->sectors = 32; // Sectors per track
- t = drv->heads * drv->sectors;
- drv->cylinders = total_size;
- rem = do_div(drv->cylinders, t);
} else {
- drv->block_size = block_size;
- drv->nr_blocks = total_size;
drv->heads = inq_buff->data_byte[6];
drv->sectors = inq_buff->data_byte[7];
drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
drv->cylinders += inq_buff->data_byte[5];
drv->raid_level = inq_buff->data_byte[8];
- t = drv->heads * drv->sectors;
- if (t > 1) {
- drv->cylinders = total_size;
- rem = do_div(drv->cylinders, t);
- }
+ }
+ drv->block_size = block_size;
+ drv->nr_blocks = total_size;
+ t = drv->heads * drv->sectors;
+ if (t > 1) {
+ unsigned rem = sector_div(total_size, t);
+ if (rem)
+ total_size++;
+ drv->cylinders = total_size;
}
} else { /* Get geometry failed */
printk(KERN_WARNING "cciss: reading geometry failed\n");
*block_size = BLOCK_SIZE;
}
if (*total_size != (__u32) 0)
- printk(KERN_INFO " blocks= %lld block_size= %d\n",
- *total_size, *block_size);
+ printk(KERN_INFO " blocks= %llu block_size= %d\n",
+ (unsigned long long)*total_size, *block_size);
kfree(buf);
return;
}
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- printk(KERN_INFO " blocks= %lld block_size= %d\n",
- *total_size, *block_size);
+ printk(KERN_INFO " blocks= %llu block_size= %d\n",
+ (unsigned long long)*total_size, *block_size);
kfree(buf);
return;
}
/* We've sent down an abort or reset, but something else
has completed */
- if (srl->ncompletions >= (NR_CMDS + 2)) {
+ if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
/* Uh oh. No room to save it for later... */
printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
"reject list overflow, command lost!\n", ctlr);
#ifdef CONFIG_CISS_SCSI_TAPE
/* if we saved some commands for later, process them now. */
if (info_p->scsi_rejects.ncompletions > 0)
- do_cciss_intr(0, info_p, NULL);
+ do_cciss_intr(0, info_p);
#endif
cmd_free(info_p, c, 1);
return status;
#endif
}
-static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t do_cciss_intr(int irq, void *dev_id)
{
ctlr_info_t *h = dev_id;
CommandList_struct *c;
a1 = a;
if ((a & 0x04)) {
a2 = (a >> 3);
- if (a2 >= NR_CMDS) {
+ if (a2 >= h->nr_cmds) {
printk(KERN_WARNING
"cciss: controller cciss%d failed, stopping.\n",
h->ctlr);
if (err > 0) {
printk(KERN_WARNING "cciss: only %d MSI-X vectors "
"available\n", err);
+ goto default_int_mode;
} else {
printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
err);
+ goto default_int_mode;
}
}
if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
if (!pci_enable_msi(pdev)) {
- c->intr[SIMPLE_MODE_INT] = pdev->irq;
c->msi_vector = 1;
- return;
} else {
printk(KERN_WARNING "cciss: MSI init failed\n");
- c->intr[SIMPLE_MODE_INT] = pdev->irq;
- return;
}
}
- default_int_mode:
+default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
c->intr[SIMPLE_MODE_INT] = pdev->irq;
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
+ c->nr_cmds = products[i].nr_cmds;
break;
}
}
- if (i == ARRAY_SIZE(products)) {
- printk(KERN_WARNING "cciss: Sorry, I don't know how"
- " to access the Smart Array controller %08lx\n",
- (unsigned long)board_id);
- err = -ENODEV;
- goto err_out_free_res;
- }
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
(readb(&c->cfgtable->Signature[2]) != 'S') ||
err = -ENODEV;
goto err_out_free_res;
}
+ /* We didn't find the controller in our list. We know the
+ * signature is valid. If it's an HP device let's try to
+ * bind to the device and fire it up. Otherwise we bail.
+ */
+ if (i == ARRAY_SIZE(products)) {
+ if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
+ c->product_name = products[i-1].product_name;
+ c->access = *(products[i-1].access);
+ c->nr_cmds = products[i-1].nr_cmds;
+ printk(KERN_WARNING "cciss: This is an unknown "
+ "Smart Array controller.\n"
+ "cciss: Please update to the latest driver "
+ "available from www.hp.com.\n");
+ } else {
+ printk(KERN_WARNING "cciss: Sorry, I don't know how"
+ " to access the Smart Array controller %08lx\n"
+ , (unsigned long)board_id);
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+ }
#ifdef CONFIG_X86
{
/* Need to enable prefetch in the SCSI core for 6400 in x86 */
}
#endif
+ /* Disabling DMA prefetch for the P600
+ * An ASIC bug may result in a prefetch beyond
+ * physical memory.
+ */
+ if(board_id == 0x3225103C) {
+ __u32 dma_prefetch;
+ dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
+ dma_prefetch |= 0x8000;
+ writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
+ }
+
#ifdef CCISS_DEBUG
printk("Trying to put board into Simple mode\n");
#endif /* CCISS_DEBUG */
/* Returns -1 if no free entries are left. */
static int alloc_cciss_hba(void)
{
- struct gendisk *disk[NWD];
- int i, n;
- for (n = 0; n < NWD; n++) {
- disk[n] = alloc_disk(1 << NWD_SHIFT);
- if (!disk[n])
- goto out;
- }
+ int i;
for (i = 0; i < MAX_CTLR; i++) {
if (!hba[i]) {
p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
if (!p)
goto Enomem;
- for (n = 0; n < NWD; n++)
- p->gendisk[n] = disk[n];
+ p->gendisk[0] = alloc_disk(1 << NWD_SHIFT);
+ if (!p->gendisk[0])
+ goto Enomem;
hba[i] = p;
return i;
}
}
printk(KERN_WARNING "cciss: This driver supports a maximum"
" of %d controllers.\n", MAX_CTLR);
- goto out;
- Enomem:
+ return -1;
+Enomem:
printk(KERN_ERR "cciss: out of memory.\n");
- out:
- while (n--)
- put_disk(disk[n]);
return -1;
}
int n;
hba[i] = NULL;
- for (n = 0; n < NWD; n++)
+ for (n = 0; n < CISS_MAX_LUN; n++)
put_disk(p->gendisk[n]);
kfree(p);
}
static int __devinit cciss_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- request_queue_t *q;
int i;
- int j;
+ int j = 0;
int rc;
int dac;
hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
hba[i]->cmd_pool_bits =
- kmalloc(((NR_CMDS + BITS_PER_LONG -
+ kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
hba[i]->cmd_pool = (CommandList_struct *)
pci_alloc_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(CommandList_struct),
+ hba[i]->nr_cmds * sizeof(CommandList_struct),
&(hba[i]->cmd_pool_dhandle));
hba[i]->errinfo_pool = (ErrorInfo_struct *)
pci_alloc_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(ErrorInfo_struct),
+ hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
&(hba[i]->errinfo_pool_dhandle));
if ((hba[i]->cmd_pool_bits == NULL)
|| (hba[i]->cmd_pool == NULL)
#ifdef CONFIG_CISS_SCSI_TAPE
hba[i]->scsi_rejects.complete =
kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
- (NR_CMDS + 5), GFP_KERNEL);
+ (hba[i]->nr_cmds + 5), GFP_KERNEL);
if (hba[i]->scsi_rejects.complete == NULL) {
printk(KERN_ERR "cciss: out of memory");
goto clean4;
/* command and error info recs zeroed out before
they are used */
memset(hba[i]->cmd_pool_bits, 0,
- ((NR_CMDS + BITS_PER_LONG -
+ ((hba[i]->nr_cmds + BITS_PER_LONG -
1) / BITS_PER_LONG) * sizeof(unsigned long));
#ifdef CCISS_DEBUG
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
cciss_procinit(i);
+
+ hba[i]->cciss_max_sectors = 2048;
+
hba[i]->busy_initializing = 0;
- for (j = 0; j < NWD; j++) { /* mfm */
+ do {
drive_info_struct *drv = &(hba[i]->drv[j]);
struct gendisk *disk = hba[i]->gendisk[j];
+ request_queue_t *q;
+
+ /* Check if the disk was allocated already */
+ if (!disk){
+ hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT);
+ disk = hba[i]->gendisk[j];
+ }
+
+ /* Check that the disk was able to be allocated */
+ if (!disk) {
+ printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j);
+ goto clean4;
+ }
q = blk_init_queue(do_cciss_request, &hba[i]->lock);
if (!q) {
printk(KERN_ERR
"cciss: unable to allocate queue for disk %d\n",
j);
- break;
+ goto clean4;
}
drv->queue = q;
/* This is a limit in the driver and could be eliminated. */
blk_queue_max_phys_segments(q, MAXSGENTRIES);
- blk_queue_max_sectors(q, 512);
+ blk_queue_max_sectors(q, hba[i]->cciss_max_sectors);
blk_queue_softirq_done(q, cciss_softirq_done);
blk_queue_hardsect_size(q, drv->block_size);
set_capacity(disk, drv->nr_blocks);
add_disk(disk);
- }
+ j++;
+ } while (j <= hba[i]->highest_lun);
return 1;
kfree(hba[i]->cmd_pool_bits);
if (hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(CommandList_struct),
+ hba[i]->nr_cmds * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
if (hba[i]->errinfo_pool)
pci_free_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(ErrorInfo_struct),
+ hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
unregister_blkdev(hba[i]->major, hba[i]->devname);
clean1:
hba[i]->busy_initializing = 0;
+ /* cleanup any queues that may have been initialized */
+ for (j=0; j <= hba[i]->highest_lun; j++){
+ drive_info_struct *drv = &(hba[i]->drv[j]);
+ if (drv->queue)
+ blk_cleanup_queue(drv->queue);
+ }
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
free_hba(i);
return -1;
}
remove_proc_entry(hba[i]->devname, proc_cciss);
/* remove it from the disk list */
- for (j = 0; j < NWD; j++) {
+ for (j = 0; j < CISS_MAX_LUN; j++) {
struct gendisk *disk = hba[i]->gendisk[j];
if (disk) {
request_queue_t *q = disk->queue;
}
}
- pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
+ pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
- pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(ErrorInfo_struct),
+ pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
#ifdef CONFIG_CISS_SCSI_TAPE
git.openpandora.org / pandora-kernel.git / blobdiff