* right. Documentation is available at initio's website but it only
* documents registers (not programming model).
*
- * - ATA disks work.
- * - Hotplug works.
- * - ATAPI read works but burning doesn't. This thing is really
- * peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
- * ATAPI DMA WRITE should be programmed. If you've got a clue, be
- * my guest.
- * - Both STR and STD work.
+ * This driver has interesting history. The first version was written
+ * from the documentation and a 2.4 IDE driver posted on a Taiwan
+ * company, which didn't use any IDMA features and couldn't handle
+ * LBA48. The resulting driver couldn't handle LBA48 devices either
+ * making it pretty useless.
+ *
+ * After a while, initio picked the driver up, renamed it to
+ * sata_initio162x, updated it to use IDMA for ATA DMA commands and
+ * posted it on their website. It only used ATA_PROT_DMA for IDMA and
+ * attaching both devices and issuing IDMA and !IDMA commands
+ * simultaneously broke it due to PIRQ masking interaction but it did
+ * show how to use the IDMA (ADMA + some initio specific twists)
+ * engine.
+ *
+ * Then, I picked up their changes again and here's the usable driver
+ * which uses IDMA for everything. Everything works now including
+ * LBA48, CD/DVD burning, suspend/resume and hotplug. There are some
+ * issues tho. Result Tf is not resported properly, NCQ isn't
+ * supported yet and CD/DVD writing works with DMA assisted PIO
+ * protocol (which, for native SATA devices, shouldn't cause any
+ * noticeable difference).
+ *
+ * Anyways, so, here's finally a working driver for inic162x. Enjoy!
+ *
+ * initio: If you guys wanna improve the driver regarding result TF
+ * access and other stuff, please feel free to contact me. I'll be
+ * happy to assist.
*/
#include <linux/kernel.h>
#include <scsi/scsi_device.h>
#define DRV_NAME "sata_inic162x"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.4"
enum {
- MMIO_BAR = 5,
+ MMIO_BAR_PCI = 5,
+ MMIO_BAR_CARDBUS = 1,
NR_PORTS = 2,
+ IDMA_CPB_TBL_SIZE = 4 * 32,
+
+ INIC_DMA_BOUNDARY = 0xffffff,
+
+ HOST_ACTRL = 0x08,
HOST_CTL = 0x7c,
HOST_STAT = 0x7e,
HOST_IRQ_STAT = 0xbc,
PORT_SIZE = 0x40,
/* registers for ATA TF operation */
- PORT_TF = 0x00,
- PORT_ALT_STAT = 0x08,
+ PORT_TF_DATA = 0x00,
+ PORT_TF_FEATURE = 0x01,
+ PORT_TF_NSECT = 0x02,
+ PORT_TF_LBAL = 0x03,
+ PORT_TF_LBAM = 0x04,
+ PORT_TF_LBAH = 0x05,
+ PORT_TF_DEVICE = 0x06,
+ PORT_TF_COMMAND = 0x07,
+ PORT_TF_ALT_STAT = 0x08,
PORT_IRQ_STAT = 0x09,
PORT_IRQ_MASK = 0x0a,
PORT_PRD_CTL = 0x0b,
PORT_PRD_ADDR = 0x0c,
PORT_PRD_XFERLEN = 0x10,
+ PORT_CPB_CPBLAR = 0x18,
+ PORT_CPB_PTQFIFO = 0x1c,
/* IDMA register */
PORT_IDMA_CTL = 0x14,
+ PORT_IDMA_STAT = 0x16,
+
+ PORT_RPQ_FIFO = 0x1e,
+ PORT_RPQ_CNT = 0x1f,
PORT_SCR = 0x20,
/* HOST_CTL bits */
+ HCTL_LEDEN = (1 << 3), /* enable LED operation */
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
- HCTL_PWRDWN = (1 << 13), /* power down PHYs */
+ HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
+ HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
+ HCTL_PWRDWN = (1 << 12), /* power down PHYs */
HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
HCTL_RPGSEL = (1 << 15), /* register page select */
PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
-
- PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA,
- PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE,
+ PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA,
PIRQ_MASK_FREEZE = 0xff,
/* PORT_PRD_CTL bits */
IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
+
+ /* PORT_IDMA_STAT bits */
+ IDMA_STAT_PERR = (1 << 0), /* PCI ERROR MODE */
+ IDMA_STAT_CPBERR = (1 << 1), /* ADMA CPB error */
+ IDMA_STAT_LGCY = (1 << 3), /* ADMA legacy */
+ IDMA_STAT_UIRQ = (1 << 4), /* ADMA unsolicited irq */
+ IDMA_STAT_STPD = (1 << 5), /* ADMA stopped */
+ IDMA_STAT_PSD = (1 << 6), /* ADMA pause */
+ IDMA_STAT_DONE = (1 << 7), /* ADMA done */
+
+ IDMA_STAT_ERR = IDMA_STAT_PERR | IDMA_STAT_CPBERR,
+
+ /* CPB Control Flags*/
+ CPB_CTL_VALID = (1 << 0), /* CPB valid */
+ CPB_CTL_QUEUED = (1 << 1), /* queued command */
+ CPB_CTL_DATA = (1 << 2), /* data, rsvd in datasheet */
+ CPB_CTL_IEN = (1 << 3), /* PCI interrupt enable */
+ CPB_CTL_DEVDIR = (1 << 4), /* device direction control */
+
+ /* CPB Response Flags */
+ CPB_RESP_DONE = (1 << 0), /* ATA command complete */
+ CPB_RESP_REL = (1 << 1), /* ATA release */
+ CPB_RESP_IGNORED = (1 << 2), /* CPB ignored */
+ CPB_RESP_ATA_ERR = (1 << 3), /* ATA command error */
+ CPB_RESP_SPURIOUS = (1 << 4), /* ATA spurious interrupt error */
+ CPB_RESP_UNDERFLOW = (1 << 5), /* APRD deficiency length error */
+ CPB_RESP_OVERFLOW = (1 << 6), /* APRD exccess length error */
+ CPB_RESP_CPB_ERR = (1 << 7), /* CPB error flag */
+
+ /* PRD Control Flags */
+ PRD_DRAIN = (1 << 1), /* ignore data excess */
+ PRD_CDB = (1 << 2), /* atapi packet command pointer */
+ PRD_DIRECT_INTR = (1 << 3), /* direct interrupt */
+ PRD_DMA = (1 << 4), /* data transfer method */
+ PRD_WRITE = (1 << 5), /* data dir, rsvd in datasheet */
+ PRD_IOM = (1 << 6), /* io/memory transfer */
+ PRD_END = (1 << 7), /* APRD chain end */
};
+/* Comman Parameter Block */
+struct inic_cpb {
+ u8 resp_flags; /* Response Flags */
+ u8 error; /* ATA Error */
+ u8 status; /* ATA Status */
+ u8 ctl_flags; /* Control Flags */
+ __le32 len; /* Total Transfer Length */
+ __le32 prd; /* First PRD pointer */
+ u8 rsvd[4];
+ /* 16 bytes */
+ u8 feature; /* ATA Feature */
+ u8 hob_feature; /* ATA Ex. Feature */
+ u8 device; /* ATA Device/Head */
+ u8 mirctl; /* Mirror Control */
+ u8 nsect; /* ATA Sector Count */
+ u8 hob_nsect; /* ATA Ex. Sector Count */
+ u8 lbal; /* ATA Sector Number */
+ u8 hob_lbal; /* ATA Ex. Sector Number */
+ u8 lbam; /* ATA Cylinder Low */
+ u8 hob_lbam; /* ATA Ex. Cylinder Low */
+ u8 lbah; /* ATA Cylinder High */
+ u8 hob_lbah; /* ATA Ex. Cylinder High */
+ u8 command; /* ATA Command */
+ u8 ctl; /* ATA Control */
+ u8 slave_error; /* Slave ATA Error */
+ u8 slave_status; /* Slave ATA Status */
+ /* 32 bytes */
+} __packed;
+
+/* Physical Region Descriptor */
+struct inic_prd {
+ __le32 mad; /* Physical Memory Address */
+ __le16 len; /* Transfer Length */
+ u8 rsvd;
+ u8 flags; /* Control Flags */
+} __packed;
+
+struct inic_pkt {
+ struct inic_cpb cpb;
+ struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */
+ u8 cdb[ATAPI_CDB_LEN];
+} __packed;
+
struct inic_host_priv {
- u16 cached_hctl;
+ void __iomem *mmio_base;
+ u16 cached_hctl;
};
struct inic_port_priv {
- u8 dfl_prdctl;
- u8 cached_prdctl;
- u8 cached_pirq_mask;
+ struct inic_pkt *pkt;
+ dma_addr_t pkt_dma;
+ u32 *cpb_tbl;
+ dma_addr_t cpb_tbl_dma;
};
static struct scsi_host_template inic_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
+ ATA_BASE_SHT(DRV_NAME),
+ .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */
+ .dma_boundary = INIC_DMA_BOUNDARY,
};
static const int scr_map[] = {
static void __iomem *inic_port_base(struct ata_port *ap)
{
- return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
-}
-
-static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
-{
- void __iomem *port_base = inic_port_base(ap);
- struct inic_port_priv *pp = ap->private_data;
+ struct inic_host_priv *hpriv = ap->host->private_data;
- writeb(mask, port_base + PORT_IRQ_MASK);
- pp->cached_pirq_mask = mask;
-}
-
-static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
-{
- struct inic_port_priv *pp = ap->private_data;
-
- if (pp->cached_pirq_mask != mask)
- __inic_set_pirq_mask(ap, mask);
+ return hpriv->mmio_base + ap->port_no * PORT_SIZE;
}
static void inic_reset_port(void __iomem *port_base)
{
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
- u16 ctl;
- ctl = readw(idma_ctl);
- ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
+ /* stop IDMA engine */
+ readw(idma_ctl); /* flush */
+ msleep(1);
/* mask IRQ and assert reset */
- writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
+ writew(IDMA_CTL_RST_IDMA, idma_ctl);
readw(idma_ctl); /* flush */
-
- /* give it some time */
msleep(1);
/* release reset */
- writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
+ writew(0, idma_ctl);
/* clear irq */
writeb(0xff, port_base + PORT_IRQ_STAT);
-
- /* reenable ATA IRQ, turn off IDMA mode */
- writew(ctl, idma_ctl);
}
static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
{
- void __iomem *scr_addr = ap->ioaddr.scr_addr;
+ void __iomem *scr_addr = inic_port_base(ap) + PORT_SCR;
void __iomem *addr;
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
- void __iomem *scr_addr = ap->ioaddr.scr_addr;
- void __iomem *addr;
+ void __iomem *scr_addr = inic_port_base(ap) + PORT_SCR;
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
return -EINVAL;
- addr = scr_addr + scr_map[sc_reg] * 4;
writel(val, scr_addr + scr_map[sc_reg] * 4);
return 0;
}
-/*
- * In TF mode, inic162x is very similar to SFF device. TF registers
- * function the same. DMA engine behaves similary using the same PRD
- * format as BMDMA but different command register, interrupt and event
- * notification methods are used. The following inic_bmdma_*()
- * functions do the impedance matching.
- */
-static void inic_bmdma_setup(struct ata_queued_cmd *qc)
+static void inic_stop_idma(struct ata_port *ap)
{
- struct ata_port *ap = qc->ap;
- struct inic_port_priv *pp = ap->private_data;
void __iomem *port_base = inic_port_base(ap);
- int rw = qc->tf.flags & ATA_TFLAG_WRITE;
-
- /* make sure device sees PRD table writes */
- wmb();
-
- /* load transfer length */
- writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
-
- /* turn on DMA and specify data direction */
- pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
- if (!rw)
- pp->cached_prdctl |= PRD_CTL_WR;
- writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
- /* issue r/w command */
- ap->ops->sff_exec_command(ap, &qc->tf);
+ readb(port_base + PORT_RPQ_FIFO);
+ readb(port_base + PORT_RPQ_CNT);
+ writew(0, port_base + PORT_IDMA_CTL);
}
-static void inic_bmdma_start(struct ata_queued_cmd *qc)
+static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat)
{
- struct ata_port *ap = qc->ap;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
struct inic_port_priv *pp = ap->private_data;
- void __iomem *port_base = inic_port_base(ap);
+ struct inic_cpb *cpb = &pp->pkt->cpb;
+ bool freeze = false;
- /* start host DMA transaction */
- pp->cached_prdctl |= PRD_CTL_START;
- writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
-}
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x",
+ irq_stat, idma_stat);
-static void inic_bmdma_stop(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct inic_port_priv *pp = ap->private_data;
- void __iomem *port_base = inic_port_base(ap);
+ inic_stop_idma(ap);
- /* stop DMA engine */
- writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
-}
+ if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
+ ata_ehi_push_desc(ehi, "hotplug");
+ ata_ehi_hotplugged(ehi);
+ freeze = true;
+ }
-static u8 inic_bmdma_status(struct ata_port *ap)
-{
- /* event is already verified by the interrupt handler */
- return ATA_DMA_INTR;
+ if (idma_stat & IDMA_STAT_PERR) {
+ ata_ehi_push_desc(ehi, "PCI error");
+ freeze = true;
+ }
+
+ if (idma_stat & IDMA_STAT_CPBERR) {
+ ata_ehi_push_desc(ehi, "CPB error");
+
+ if (cpb->resp_flags & CPB_RESP_IGNORED) {
+ __ata_ehi_push_desc(ehi, " ignored");
+ ehi->err_mask |= AC_ERR_INVALID;
+ freeze = true;
+ }
+
+ if (cpb->resp_flags & CPB_RESP_ATA_ERR)
+ ehi->err_mask |= AC_ERR_DEV;
+
+ if (cpb->resp_flags & CPB_RESP_SPURIOUS) {
+ __ata_ehi_push_desc(ehi, " spurious-intr");
+ ehi->err_mask |= AC_ERR_HSM;
+ freeze = true;
+ }
+
+ if (cpb->resp_flags &
+ (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) {
+ __ata_ehi_push_desc(ehi, " data-over/underflow");
+ ehi->err_mask |= AC_ERR_HSM;
+ freeze = true;
+ }
+ }
+
+ if (freeze)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
}
static void inic_host_intr(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
u8 irq_stat;
+ u16 idma_stat;
- /* fetch and clear irq */
+ /* read and clear IRQ status */
irq_stat = readb(port_base + PORT_IRQ_STAT);
writeb(irq_stat, port_base + PORT_IRQ_STAT);
+ idma_stat = readw(port_base + PORT_IDMA_STAT);
- if (likely(!(irq_stat & PIRQ_ERR))) {
- struct ata_queued_cmd *qc =
- ata_qc_from_tag(ap, ap->link.active_tag);
+ if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR)))
+ inic_host_err_intr(ap, irq_stat, idma_stat);
- if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
- ap->ops->sff_check_status(ap); /* clear ATA interrupt */
- return;
- }
+ if (unlikely(!qc))
+ goto spurious;
- if (likely(ata_sff_host_intr(ap, qc)))
- return;
+ if (likely(idma_stat & IDMA_STAT_DONE)) {
+ inic_stop_idma(ap);
- ap->ops->sff_check_status(ap); /* clear ATA interrupt */
- ata_port_printk(ap, KERN_WARNING, "unhandled "
- "interrupt, irq_stat=%x\n", irq_stat);
+ /* Depending on circumstances, device error
+ * isn't reported by IDMA, check it explicitly.
+ */
+ if (unlikely(readb(port_base + PORT_TF_COMMAND) &
+ (ATA_DF | ATA_ERR)))
+ qc->err_mask |= AC_ERR_DEV;
+
+ ata_qc_complete(qc);
return;
}
- /* error */
- ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
-
- if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
- ata_ehi_hotplugged(ehi);
- ata_port_freeze(ap);
- } else
- ata_port_abort(ap);
+ spurious:
+ ata_port_printk(ap, KERN_WARNING, "unhandled interrupt: "
+ "cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n",
+ qc ? qc->tf.command : 0xff, irq_stat, idma_stat);
}
static irqreturn_t inic_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
- void __iomem *mmio_base = host->iomap[MMIO_BAR];
+ struct inic_host_priv *hpriv = host->private_data;
u16 host_irq_stat;
int i, handled = 0;;
- host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
+ host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT);
if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
goto out;
return IRQ_RETVAL(handled);
}
+static int inic_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ /* For some reason ATAPI_PROT_DMA doesn't work for some
+ * commands including writes and other misc ops. Use PIO
+ * protocol instead, which BTW is driven by the DMA engine
+ * anyway, so it shouldn't make much difference for native
+ * SATA devices.
+ */
+ if (atapi_cmd_type(qc->cdb[0]) == READ)
+ return 0;
+ return 1;
+}
+
+static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc)
+{
+ struct scatterlist *sg;
+ unsigned int si;
+ u8 flags = 0;
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ flags |= PRD_WRITE;
+
+ if (ata_is_dma(qc->tf.protocol))
+ flags |= PRD_DMA;
+
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ prd->mad = cpu_to_le32(sg_dma_address(sg));
+ prd->len = cpu_to_le16(sg_dma_len(sg));
+ prd->flags = flags;
+ prd++;
+ }
+
+ WARN_ON(!si);
+ prd[-1].flags |= PRD_END;
+}
+
+static void inic_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct inic_port_priv *pp = qc->ap->private_data;
+ struct inic_pkt *pkt = pp->pkt;
+ struct inic_cpb *cpb = &pkt->cpb;
+ struct inic_prd *prd = pkt->prd;
+ bool is_atapi = ata_is_atapi(qc->tf.protocol);
+ bool is_data = ata_is_data(qc->tf.protocol);
+ unsigned int cdb_len = 0;
+
+ VPRINTK("ENTER\n");
+
+ if (is_atapi)
+ cdb_len = qc->dev->cdb_len;
+
+ /* prepare packet, based on initio driver */
+ memset(pkt, 0, sizeof(struct inic_pkt));
+
+ cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN;
+ if (is_atapi || is_data)
+ cpb->ctl_flags |= CPB_CTL_DATA;
+
+ cpb->len = cpu_to_le32(qc->nbytes + cdb_len);
+ cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd));
+
+ cpb->device = qc->tf.device;
+ cpb->feature = qc->tf.feature;
+ cpb->nsect = qc->tf.nsect;
+ cpb->lbal = qc->tf.lbal;
+ cpb->lbam = qc->tf.lbam;
+ cpb->lbah = qc->tf.lbah;
+
+ if (qc->tf.flags & ATA_TFLAG_LBA48) {
+ cpb->hob_feature = qc->tf.hob_feature;
+ cpb->hob_nsect = qc->tf.hob_nsect;
+ cpb->hob_lbal = qc->tf.hob_lbal;
+ cpb->hob_lbam = qc->tf.hob_lbam;
+ cpb->hob_lbah = qc->tf.hob_lbah;
+ }
+
+ cpb->command = qc->tf.command;
+ /* don't load ctl - dunno why. it's like that in the initio driver */
+
+ /* setup PRD for CDB */
+ if (is_atapi) {
+ memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN);
+ prd->mad = cpu_to_le32(pp->pkt_dma +
+ offsetof(struct inic_pkt, cdb));
+ prd->len = cpu_to_le16(cdb_len);
+ prd->flags = PRD_CDB | PRD_WRITE;
+ if (!is_data)
+ prd->flags |= PRD_END;
+ prd++;
+ }
+
+ /* setup sg table */
+ if (is_data)
+ inic_fill_sg(prd, qc);
+
+ pp->cpb_tbl[0] = pp->pkt_dma;
+}
+
static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ void __iomem *port_base = inic_port_base(ap);
- /* ATA IRQ doesn't wait for DMA transfer completion and vice
- * versa. Mask IRQ selectively to detect command completion.
- * Without it, ATA DMA read command can cause data corruption.
- *
- * Something similar might be needed for ATAPI writes. I
- * tried a lot of combinations but couldn't find the solution.
- */
- if (qc->tf.protocol == ATA_PROT_DMA &&
- !(qc->tf.flags & ATA_TFLAG_WRITE))
- inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
- else
- inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+ /* fire up the ADMA engine */
+ writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
+ writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
+ writeb(0, port_base + PORT_CPB_PTQFIFO);
+
+ return 0;
+}
+
+static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ void __iomem *port_base = inic_port_base(ap);
+
+ tf->feature = readb(port_base + PORT_TF_FEATURE);
+ tf->nsect = readb(port_base + PORT_TF_NSECT);
+ tf->lbal = readb(port_base + PORT_TF_LBAL);
+ tf->lbam = readb(port_base + PORT_TF_LBAM);
+ tf->lbah = readb(port_base + PORT_TF_LBAH);
+ tf->device = readb(port_base + PORT_TF_DEVICE);
+ tf->command = readb(port_base + PORT_TF_COMMAND);
+}
- /* Issuing a command to yet uninitialized port locks up the
- * controller. Most of the time, this happens for the first
- * command after reset which are ATA and ATAPI IDENTIFYs.
- * Fast fail if stat is 0x7f or 0xff for those commands.
+static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *rtf = &qc->result_tf;
+ struct ata_taskfile tf;
+
+ /* FIXME: Except for status and error, result TF access
+ * doesn't work. I tried reading from BAR0/2, CPB and BAR5.
+ * None works regardless of which command interface is used.
+ * For now return true iff status indicates device error.
+ * This means that we're reporting bogus sector for RW
+ * failures. Eeekk....
*/
- if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
- qc->tf.command == ATA_CMD_ID_ATAPI)) {
- u8 stat = ap->ops->sff_check_status(ap);
- if (stat == 0x7f || stat == 0xff)
- return AC_ERR_HSM;
- }
+ inic_tf_read(qc->ap, &tf);
- return ata_sff_qc_issue(qc);
+ if (!(tf.command & ATA_ERR))
+ return false;
+
+ rtf->command = tf.command;
+ rtf->feature = tf.feature;
+ return true;
}
static void inic_freeze(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
-
- ap->ops->sff_check_status(ap);
+ writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK);
writeb(0xff, port_base + PORT_IRQ_STAT);
-
- readb(port_base + PORT_IRQ_STAT); /* flush */
}
static void inic_thaw(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- ap->ops->sff_check_status(ap);
writeb(0xff, port_base + PORT_IRQ_STAT);
+ writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK);
+}
- __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+static int inic_check_ready(struct ata_link *link)
+{
+ void __iomem *port_base = inic_port_base(link->ap);
- readb(port_base + PORT_IRQ_STAT); /* flush */
+ return ata_check_ready(readb(port_base + PORT_TF_COMMAND));
}
/*
void __iomem *port_base = inic_port_base(ap);
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
- u16 val;
int rc;
/* hammer it into sane state */
inic_reset_port(port_base);
- val = readw(idma_ctl);
- writew(val | IDMA_CTL_RST_ATA, idma_ctl);
+ writew(IDMA_CTL_RST_ATA, idma_ctl);
readw(idma_ctl); /* flush */
msleep(1);
- writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
+ writew(0, idma_ctl);
rc = sata_link_resume(link, timing, deadline);
if (rc) {
struct ata_taskfile tf;
/* wait for link to become ready */
- rc = ata_sff_wait_after_reset(link, 1, deadline);
+ rc = ata_wait_after_reset(link, deadline, inic_check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
ata_link_printk(link, KERN_WARNING, "device not ready "
return rc;
}
- ata_sff_tf_read(ap, &tf);
+ inic_tf_read(ap, &tf);
*class = ata_dev_classify(&tf);
}
static void inic_error_handler(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
- struct inic_port_priv *pp = ap->private_data;
- unsigned long flags;
- /* reset PIO HSM and stop DMA engine */
inic_reset_port(port_base);
-
- spin_lock_irqsave(ap->lock, flags);
- ap->hsm_task_state = HSM_ST_IDLE;
- writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
- spin_unlock_irqrestore(ap->lock, flags);
-
- /* PIO and DMA engines have been stopped, perform recovery */
ata_std_error_handler(ap);
}
inic_reset_port(inic_port_base(qc->ap));
}
-static void inic_dev_config(struct ata_device *dev)
-{
- /* inic can only handle upto LBA28 max sectors */
- if (dev->max_sectors > ATA_MAX_SECTORS)
- dev->max_sectors = ATA_MAX_SECTORS;
-
- if (dev->n_sectors >= 1 << 28) {
- ata_dev_printk(dev, KERN_ERR,
- "ERROR: This driver doesn't support LBA48 yet and may cause\n"
- " data corruption on such devices. Disabling.\n");
- ata_dev_disable(dev);
- }
-}
-
static void init_port(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
+ struct inic_port_priv *pp = ap->private_data;
- /* Setup PRD address */
+ /* clear packet and CPB table */
+ memset(pp->pkt, 0, sizeof(struct inic_pkt));
+ memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE);
+
+ /* setup PRD and CPB lookup table addresses */
writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
+ writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR);
}
static int inic_port_resume(struct ata_port *ap)
static int inic_port_start(struct ata_port *ap)
{
- void __iomem *port_base = inic_port_base(ap);
+ struct device *dev = ap->host->dev;
struct inic_port_priv *pp;
- u8 tmp;
int rc;
/* alloc and initialize private data */
- pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL);
+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
ap->private_data = pp;
- /* default PRD_CTL value, DMAEN, WR and START off */
- tmp = readb(port_base + PORT_PRD_CTL);
- tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
- pp->dfl_prdctl = tmp;
-
/* Alloc resources */
rc = ata_port_start(ap);
- if (rc) {
- kfree(pp);
+ if (rc)
return rc;
- }
+
+ pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt),
+ &pp->pkt_dma, GFP_KERNEL);
+ if (!pp->pkt)
+ return -ENOMEM;
+
+ pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE,
+ &pp->cpb_tbl_dma, GFP_KERNEL);
+ if (!pp->cpb_tbl)
+ return -ENOMEM;
init_port(ap);
}
static struct ata_port_operations inic_port_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &sata_port_ops,
- .bmdma_setup = inic_bmdma_setup,
- .bmdma_start = inic_bmdma_start,
- .bmdma_stop = inic_bmdma_stop,
- .bmdma_status = inic_bmdma_status,
+ .check_atapi_dma = inic_check_atapi_dma,
+ .qc_prep = inic_qc_prep,
.qc_issue = inic_qc_issue,
+ .qc_fill_rtf = inic_qc_fill_rtf,
.freeze = inic_freeze,
.thaw = inic_thaw,
- .softreset = ATA_OP_NULL, /* softreset is broken */
.hardreset = inic_hardreset,
.error_handler = inic_error_handler,
.post_internal_cmd = inic_post_internal_cmd,
- .dev_config = inic_dev_config,
.scr_read = inic_scr_read,
.scr_write = inic_scr_write,
};
static struct ata_port_info inic_port_info = {
- /* For some reason, ATAPI_PROT_PIO is broken on this
- * controller, and no, PIO_POLLING does't fix it. It somehow
- * manages to report the wrong ireason and ignoring ireason
- * results in machine lock up. Tell libata to always prefer
- * DMA.
- */
.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct inic_host_priv *hpriv = host->private_data;
- void __iomem *mmio_base = host->iomap[MMIO_BAR];
int rc;
rc = ata_pci_device_do_resume(pdev);
return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- rc = init_controller(mmio_base, hpriv->cached_hctl);
+ rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc)
return rc;
}
struct ata_host *host;
struct inic_host_priv *hpriv;
void __iomem * const *iomap;
+ int mmio_bar;
int i, rc;
if (!printed_version++)
host->private_data = hpriv;
- /* acquire resources and fill host */
+ /* Acquire resources and fill host. Note that PCI and cardbus
+ * use different BARs.
+ */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
- rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
+ if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM)
+ mmio_bar = MMIO_BAR_PCI;
+ else
+ mmio_bar = MMIO_BAR_CARDBUS;
+
+ rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME);
if (rc)
return rc;
host->iomap = iomap = pcim_iomap_table(pdev);
+ hpriv->mmio_base = iomap[mmio_bar];
+ hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL);
for (i = 0; i < NR_PORTS; i++) {
struct ata_port *ap = host->ports[i];
- struct ata_ioports *port = &ap->ioaddr;
- unsigned int offset = i * PORT_SIZE;
-
- port->cmd_addr = iomap[2 * i];
- port->altstatus_addr =
- port->ctl_addr = (void __iomem *)
- ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
- port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
-
- ata_sff_std_ports(port);
-
- ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
- ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
- ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
- (unsigned long long)pci_resource_start(pdev, 2 * i),
- (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
- ATA_PCI_CTL_OFS);
- }
- hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
+ ata_port_pbar_desc(ap, mmio_bar, -1, "mmio");
+ ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port");
+ }
/* Set dma_mask. This devices doesn't support 64bit addressing. */
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
return rc;
}
- rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
+ rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to initialize controller\n");
git.openpandora.org / pandora-kernel.git / blobdiff