libata: change ATA_QCFLAG_DMAMAP semantics

[pandora-kernel.git] / drivers / ata / pata_radisys.c

diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 1c54673..8109b08 100644 (file)
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -161,7 +161,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
  *
  *     Called when the libata layer is about to issue a command. We wrap
  *     this interface so that we can load the correct ATA timings if
- *     neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ *     necessary. Our logic also clears TIME0/TIME1 for the other device so
  *     that, even if we get this wrong, cycles to the other device will
  *     be made PIO0.
  */
@@ -200,14 +200,9 @@ static struct scsi_host_template radisys_sht = {
        .slave_configure        = ata_scsi_slave_config,
        .slave_destroy          = ata_scsi_slave_destroy,
        .bios_param             = ata_std_bios_param,
-#ifdef CONFIG_PM
-       .resume                 = ata_scsi_device_resume,
-       .suspend                = ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations radisys_pata_ops = {
-       .port_disable           = ata_port_disable,
        .set_piomode            = radisys_set_piomode,
        .set_dmamode            = radisys_set_dmamode,
        .mode_filter            = ata_pci_default_filter,
@@ -235,9 +230,8 @@ static const struct ata_port_operations radisys_pata_ops = {
        .irq_handler            = ata_interrupt,
        .irq_clear              = ata_bmdma_irq_clear,
        .irq_on                 = ata_irq_on,
-       .irq_ack                = ata_irq_ack,
 
-       .port_start             = ata_port_start,
+       .port_start             = ata_sff_port_start,
 };
 
 
@@ -259,21 +253,21 @@ static const struct ata_port_operations radisys_pata_ops = {
 static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
        static int printed_version;
-       static struct ata_port_info info = {
+       static const struct ata_port_info info = {
                .sht            = &radisys_sht,
-               .flags          = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .flags          = ATA_FLAG_SLAVE_POSS,
                .pio_mask       = 0x1f, /* pio0-4 */
                .mwdma_mask     = 0x07, /* mwdma1-2 */
                .udma_mask      = 0x14, /* UDMA33/66 only */
                .port_ops       = &radisys_pata_ops,
        };
-       static struct ata_port_info *port_info[2] = { &info, &info };
+       const struct ata_port_info *ppi[] = { &info, NULL };
 
        if (!printed_version++)
                dev_printk(KERN_DEBUG, &pdev->dev,
                           "version " DRV_VERSION "\n");
 
-       return ata_pci_init_one(pdev, port_info, 2);
+       return ata_pci_init_one(pdev, ppi);
 }
 
 static const struct pci_device_id radisys_pci_tbl[] = {