#include "libata.h"
+static struct workqueue_struct *ata_sff_wq;
+
const struct ata_port_operations ata_sff_port_ops = {
.inherits = &ata_base_port_ops,
- .qc_prep = ata_sff_qc_prep,
+ .qc_prep = ata_noop_qc_prep,
.qc_issue = ata_sff_qc_issue,
.qc_fill_rtf = ata_sff_qc_fill_rtf,
.softreset = ata_sff_softreset,
.hardreset = sata_sff_hardreset,
.postreset = ata_sff_postreset,
- .drain_fifo = ata_sff_drain_fifo,
.error_handler = ata_sff_error_handler,
- .post_internal_cmd = ata_sff_post_internal_cmd,
.sff_dev_select = ata_sff_dev_select,
.sff_check_status = ata_sff_check_status,
.sff_exec_command = ata_sff_exec_command,
.sff_data_xfer = ata_sff_data_xfer,
.sff_irq_clear = ata_sff_irq_clear,
+ .sff_drain_fifo = ata_sff_drain_fifo,
.lost_interrupt = ata_sff_lost_interrupt,
-
- .port_start = ata_sff_port_start,
};
EXPORT_SYMBOL_GPL(ata_sff_port_ops);
-const struct ata_port_operations ata_bmdma_port_ops = {
- .inherits = &ata_sff_port_ops,
-
- .mode_filter = ata_bmdma_mode_filter,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-};
-EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
-
-const struct ata_port_operations ata_bmdma32_port_ops = {
- .inherits = &ata_bmdma_port_ops,
-
- .sff_data_xfer = ata_sff_data_xfer32,
- .port_start = ata_sff_port_start32,
-};
-EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
-
-/**
- * ata_fill_sg - Fill PCI IDE PRD table
- * @qc: Metadata associated with taskfile to be transferred
- *
- * Fill PCI IDE PRD (scatter-gather) table with segments
- * associated with the current disk command.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scatterlist *sg;
- unsigned int si, pi;
-
- pi = 0;
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- u32 addr, offset;
- u32 sg_len, len;
-
- /* determine if physical DMA addr spans 64K boundary.
- * Note h/w doesn't support 64-bit, so we unconditionally
- * truncate dma_addr_t to u32.
- */
- addr = (u32) sg_dma_address(sg);
- sg_len = sg_dma_len(sg);
-
- while (sg_len) {
- offset = addr & 0xffff;
- len = sg_len;
- if ((offset + sg_len) > 0x10000)
- len = 0x10000 - offset;
-
- ap->prd[pi].addr = cpu_to_le32(addr);
- ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
- pi++;
- sg_len -= len;
- addr += len;
- }
- }
-
- ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
- * ata_fill_sg_dumb - Fill PCI IDE PRD table
- * @qc: Metadata associated with taskfile to be transferred
- *
- * Fill PCI IDE PRD (scatter-gather) table with segments
- * associated with the current disk command. Perform the fill
- * so that we avoid writing any length 64K records for
- * controllers that don't follow the spec.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scatterlist *sg;
- unsigned int si, pi;
-
- pi = 0;
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- u32 addr, offset;
- u32 sg_len, len, blen;
-
- /* determine if physical DMA addr spans 64K boundary.
- * Note h/w doesn't support 64-bit, so we unconditionally
- * truncate dma_addr_t to u32.
- */
- addr = (u32) sg_dma_address(sg);
- sg_len = sg_dma_len(sg);
-
- while (sg_len) {
- offset = addr & 0xffff;
- len = sg_len;
- if ((offset + sg_len) > 0x10000)
- len = 0x10000 - offset;
-
- blen = len & 0xffff;
- ap->prd[pi].addr = cpu_to_le32(addr);
- if (blen == 0) {
- /* Some PATA chipsets like the CS5530 can't
- cope with 0x0000 meaning 64K as the spec
- says */
- ap->prd[pi].flags_len = cpu_to_le32(0x8000);
- blen = 0x8000;
- ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
- }
- ap->prd[pi].flags_len = cpu_to_le32(blen);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
- pi++;
- sg_len -= len;
- addr += len;
- }
- }
-
- ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
- * ata_sff_qc_prep - Prepare taskfile for submission
- * @qc: Metadata associated with taskfile to be prepared
- *
- * Prepare ATA taskfile for submission.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_sff_qc_prep(struct ata_queued_cmd *qc)
-{
- if (!(qc->flags & ATA_QCFLAG_DMAMAP))
- return;
-
- ata_fill_sg(qc);
-}
-EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
-
-/**
- * ata_sff_dumb_qc_prep - Prepare taskfile for submission
- * @qc: Metadata associated with taskfile to be prepared
- *
- * Prepare ATA taskfile for submission.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc)
-{
- if (!(qc->flags & ATA_QCFLAG_DMAMAP))
- return;
-
- ata_fill_sg_dumb(qc);
-}
-EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
-
/**
* ata_sff_check_status - Read device status reg & clear interrupt
* @ap: port where the device is
if (in_wq)
spin_unlock_irqrestore(ap->lock, flags);
- /* if polling, ata_pio_task() handles the rest.
+ /* if polling, ata_sff_pio_task() handles the rest.
* otherwise, interrupt handler takes over from here.
*/
break;
}
EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
-void ata_pio_task(struct work_struct *work)
+void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay)
+{
+ /* may fail if ata_sff_flush_pio_task() in progress */
+ queue_delayed_work(ata_sff_wq, &ap->sff_pio_task,
+ msecs_to_jiffies(delay));
+}
+EXPORT_SYMBOL_GPL(ata_sff_queue_pio_task);
+
+void ata_sff_flush_pio_task(struct ata_port *ap)
+{
+ DPRINTK("ENTER\n");
+
+ cancel_rearming_delayed_work(&ap->sff_pio_task);
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ if (ata_msg_ctl(ap))
+ ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
+}
+
+static void ata_sff_pio_task(struct work_struct *work)
{
struct ata_port *ap =
- container_of(work, struct ata_port, port_task.work);
- struct ata_queued_cmd *qc = ap->port_task_data;
+ container_of(work, struct ata_port, sff_pio_task.work);
+ struct ata_queued_cmd *qc;
u8 status;
int poll_next;
+ /* qc can be NULL if timeout occurred */
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (!qc)
+ return;
+
fsm_start:
WARN_ON_ONCE(ap->hsm_task_state == HSM_ST_IDLE);
msleep(2);
status = ata_sff_busy_wait(ap, ATA_BUSY, 10);
if (status & ATA_BUSY) {
- ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
+ ata_sff_queue_pio_task(ap, ATA_SHORT_PAUSE);
return;
}
}
}
/**
- * ata_sff_qc_issue - issue taskfile to device in proto-dependent manner
+ * ata_sff_qc_issue - issue taskfile to a SFF controller
* @qc: command to issue to device
*
- * Using various libata functions and hooks, this function
- * starts an ATA command. ATA commands are grouped into
- * classes called "protocols", and issuing each type of protocol
- * is slightly different.
- *
- * May be used as the qc_issue() entry in ata_port_operations.
+ * This function issues a PIO or NODATA command to a SFF
+ * controller.
*
* LOCKING:
* spin_lock_irqsave(host lock)
/* Use polling pio if the LLD doesn't handle
* interrupt driven pio and atapi CDB interrupt.
*/
- if (ap->flags & ATA_FLAG_PIO_POLLING) {
- switch (qc->tf.protocol) {
- case ATA_PROT_PIO:
- case ATA_PROT_NODATA:
- case ATAPI_PROT_PIO:
- case ATAPI_PROT_NODATA:
- qc->tf.flags |= ATA_TFLAG_POLLING;
- break;
- case ATAPI_PROT_DMA:
- if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
- /* see ata_dma_blacklisted() */
- BUG();
- break;
- default:
- break;
- }
- }
+ if (ap->flags & ATA_FLAG_PIO_POLLING)
+ qc->tf.flags |= ATA_TFLAG_POLLING;
/* select the device */
ata_dev_select(ap, qc->dev->devno, 1, 0);
ap->hsm_task_state = HSM_ST_LAST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
-
- break;
-
- case ATA_PROT_DMA:
- WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
+ ata_sff_queue_pio_task(ap, 0);
- ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
- ap->ops->bmdma_setup(qc); /* set up bmdma */
- ap->ops->bmdma_start(qc); /* initiate bmdma */
- ap->hsm_task_state = HSM_ST_LAST;
break;
case ATA_PROT_PIO:
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* PIO data out protocol */
ap->hsm_task_state = HSM_ST_FIRST;
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
- /* always send first data block using
- * the ata_pio_task() codepath.
+ /* always send first data block using the
+ * ata_sff_pio_task() codepath.
*/
} else {
/* PIO data in protocol */
ap->hsm_task_state = HSM_ST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
- /* if polling, ata_pio_task() handles the rest.
- * otherwise, interrupt handler takes over from here.
+ /* if polling, ata_sff_pio_task() handles the
+ * rest. otherwise, interrupt handler takes
+ * over from here.
*/
}
/* send cdb by polling if no cdb interrupt */
if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
(qc->tf.flags & ATA_TFLAG_POLLING))
- ata_pio_queue_task(ap, qc, 0);
- break;
-
- case ATAPI_PROT_DMA:
- WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
-
- ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
- ap->ops->bmdma_setup(qc); /* set up bmdma */
- ap->hsm_task_state = HSM_ST_FIRST;
-
- /* send cdb by polling if no cdb interrupt */
- if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
break;
default:
goto idle_irq;
}
- /* ack bmdma irq events */
+ /* clear irq events */
ap->ops->sff_irq_clear(ap);
ata_sff_hsm_move(ap, qc, status, 0);
* ata_sff_freeze - Freeze SFF controller port
* @ap: port to freeze
*
- * Freeze BMDMA controller port.
+ * Freeze SFF controller port.
*
* LOCKING:
* Inherited from caller.
EXPORT_SYMBOL_GPL(ata_sff_drain_fifo);
/**
- * ata_sff_error_handler - Stock error handler for BMDMA controller
+ * ata_sff_error_handler - Stock error handler for SFF controller
* @ap: port to handle error for
*
* Stock error handler for SFF controller. It can handle both
ata_reset_fn_t hardreset = ap->ops->hardreset;
struct ata_queued_cmd *qc;
unsigned long flags;
- bool thaw = false;
qc = __ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
qc = NULL;
- /* reset PIO HSM and stop DMA engine */
spin_lock_irqsave(ap->lock, flags);
- ap->hsm_task_state = HSM_ST_IDLE;
-
- if (ap->ioaddr.bmdma_addr &&
- qc && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA)) {
- u8 host_stat;
-
- host_stat = ap->ops->bmdma_status(ap);
-
- /* BMDMA controllers indicate host bus error by
- * setting DMA_ERR bit and timing out. As it wasn't
- * really a timeout event, adjust error mask and
- * cancel frozen state.
- */
- if (qc->err_mask == AC_ERR_TIMEOUT
- && (host_stat & ATA_DMA_ERR)) {
- qc->err_mask = AC_ERR_HOST_BUS;
- thaw = true;
- }
-
- ap->ops->bmdma_stop(qc);
-
- /* if we're gonna thaw, make sure IRQ is clear */
- if (thaw) {
- ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
-
- spin_unlock_irqrestore(ap->lock, flags);
- ata_eh_thaw_port(ap);
- spin_lock_irqsave(ap->lock, flags);
- }
- }
-
- /* We *MUST* do FIFO draining before we issue a reset as several
- * devices helpfully clear their internal state and will lock solid
- * if we touch the data port post reset. Pass qc in case anyone wants
- * to do different PIO/DMA recovery or has per command fixups
+ /*
+ * We *MUST* do FIFO draining before we issue a reset as
+ * several devices helpfully clear their internal state and
+ * will lock solid if we touch the data port post reset. Pass
+ * qc in case anyone wants to do different PIO/DMA recovery or
+ * has per command fixups
*/
- if (ap->ops->drain_fifo)
- ap->ops->drain_fifo(qc);
+ if (ap->ops->sff_drain_fifo)
+ ap->ops->sff_drain_fifo(qc);
spin_unlock_irqrestore(ap->lock, flags);
- /* PIO and DMA engines have been stopped, perform recovery */
-
- /* Ignore ata_sff_softreset if ctl isn't accessible and
- * built-in hardresets if SCR access isn't available.
- */
+ /* ignore ata_sff_softreset if ctl isn't accessible */
if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
softreset = NULL;
- if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
+
+ /* ignore built-in hardresets if SCR access is not available */
+ if ((hardreset == sata_std_hardreset ||
+ hardreset == sata_sff_hardreset) && !sata_scr_valid(&ap->link))
hardreset = NULL;
ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
EXPORT_SYMBOL_GPL(ata_sff_error_handler);
/**
- * ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller
- * @qc: internal command to clean up
+ * ata_sff_std_ports - initialize ioaddr with standard port offsets.
+ * @ioaddr: IO address structure to be initialized
*
- * LOCKING:
- * Kernel thread context (may sleep)
+ * Utility function which initializes data_addr, error_addr,
+ * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
+ * device_addr, status_addr, and command_addr to standard offsets
+ * relative to cmd_addr.
+ *
+ * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
*/
-void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
+void ata_sff_std_ports(struct ata_ioports *ioaddr)
{
- struct ata_port *ap = qc->ap;
- unsigned long flags;
-
- spin_lock_irqsave(ap->lock, flags);
-
- ap->hsm_task_state = HSM_ST_IDLE;
+ ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
+ ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
+ ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
+ ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
+ ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
+ ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
+ ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
+ ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
+ ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
+ ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
+}
+EXPORT_SYMBOL_GPL(ata_sff_std_ports);
- if (ap->ioaddr.bmdma_addr)
- ap->ops->bmdma_stop(qc);
+#ifdef CONFIG_PCI
- spin_unlock_irqrestore(ap->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
-
-/**
- * ata_sff_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start(struct ata_port *ap)
-{
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-
-/**
- * ata_sff_port_start32 - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations for
- * devices that are capable of 32bit PIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start32(struct ata_port *ap)
-{
- ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start32);
-
-/**
- * ata_sff_std_ports - initialize ioaddr with standard port offsets.
- * @ioaddr: IO address structure to be initialized
- *
- * Utility function which initializes data_addr, error_addr,
- * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
- * device_addr, status_addr, and command_addr to standard offsets
- * relative to cmd_addr.
- *
- * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
- */
-void ata_sff_std_ports(struct ata_ioports *ioaddr)
-{
- ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
- ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
- ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
- ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
- ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
- ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
- ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
- ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
- ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
- ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
-}
-EXPORT_SYMBOL_GPL(ata_sff_std_ports);
-
-unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
- unsigned long xfer_mask)
-{
- /* Filter out DMA modes if the device has been configured by
- the BIOS as PIO only */
-
- if (adev->link->ap->ioaddr.bmdma_addr == NULL)
- xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return xfer_mask;
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
-
-/**
- * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_bmdma_setup(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
- u8 dmactl;
-
- /* load PRD table addr. */
- mb(); /* make sure PRD table writes are visible to controller */
- iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
-
- /* specify data direction, triple-check start bit is clear */
- dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
- if (!rw)
- dmactl |= ATA_DMA_WR;
- iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* issue r/w command */
- ap->ops->sff_exec_command(ap, &qc->tf);
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_setup);
-
-/**
- * ata_bmdma_start - Start a PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 dmactl;
-
- /* start host DMA transaction */
- dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* Strictly, one may wish to issue an ioread8() here, to
- * flush the mmio write. However, control also passes
- * to the hardware at this point, and it will interrupt
- * us when we are to resume control. So, in effect,
- * we don't care when the mmio write flushes.
- * Further, a read of the DMA status register _immediately_
- * following the write may not be what certain flaky hardware
- * is expected, so I think it is best to not add a readb()
- * without first all the MMIO ATA cards/mobos.
- * Or maybe I'm just being paranoid.
- *
- * FIXME: The posting of this write means I/O starts are
- * unneccessarily delayed for MMIO
- */
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_start);
-
-/**
- * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
- * @qc: Command we are ending DMA for
- *
- * Clears the ATA_DMA_START flag in the dma control register
- *
- * May be used as the bmdma_stop() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_bmdma_stop(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- /* clear start/stop bit */
- iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
- mmio + ATA_DMA_CMD);
-
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_dma_pause(ap);
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_stop);
-
-/**
- * ata_bmdma_status - Read PCI IDE BMDMA status
- * @ap: Port associated with this ATA transaction.
- *
- * Read and return BMDMA status register.
- *
- * May be used as the bmdma_status() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-u8 ata_bmdma_status(struct ata_port *ap)
-{
- return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_status);
-
-#ifdef CONFIG_PCI
-
-/**
- * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
- * @pdev: PCI device
- *
- * Some PCI ATA devices report simplex mode but in fact can be told to
- * enter non simplex mode. This implements the necessary logic to
- * perform the task on such devices. Calling it on other devices will
- * have -undefined- behaviour.
- */
-int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
-{
- unsigned long bmdma = pci_resource_start(pdev, 4);
- u8 simplex;
-
- if (bmdma == 0)
- return -ENOENT;
-
- simplex = inb(bmdma + 0x02);
- outb(simplex & 0x60, bmdma + 0x02);
- simplex = inb(bmdma + 0x02);
- if (simplex & 0x80)
- return -EOPNOTSUPP;
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
-
-/**
- * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
- * @host: target ATA host
- *
- * Acquire PCI BMDMA resources and initialize @host accordingly.
- *
- * LOCKING:
- * Inherited from calling layer (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_pci_bmdma_init(struct ata_host *host)
-{
- struct device *gdev = host->dev;
- struct pci_dev *pdev = to_pci_dev(gdev);
- int i, rc;
-
- /* No BAR4 allocation: No DMA */
- if (pci_resource_start(pdev, 4) == 0)
- return 0;
-
- /* TODO: If we get no DMA mask we should fall back to PIO */
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- return rc;
-
- /* request and iomap DMA region */
- rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
- if (rc) {
- dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
- return -ENOMEM;
- }
- host->iomap = pcim_iomap_table(pdev);
-
- for (i = 0; i < 2; i++) {
- struct ata_port *ap = host->ports[i];
- void __iomem *bmdma = host->iomap[4] + 8 * i;
-
- if (ata_port_is_dummy(ap))
- continue;
-
- ap->ioaddr.bmdma_addr = bmdma;
- if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
- (ioread8(bmdma + 2) & 0x80))
- host->flags |= ATA_HOST_SIMPLEX;
-
- ata_port_desc(ap, "bmdma 0x%llx",
- (unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
-
-static int ata_resources_present(struct pci_dev *pdev, int port)
-{
- int i;
+static int ata_resources_present(struct pci_dev *pdev, int port)
+{
+ int i;
/* Check the PCI resources for this channel are enabled */
port = port * 2;
goto err_out;
/* init DMA related stuff */
- rc = ata_pci_bmdma_init(host);
- if (rc)
- goto err_bmdma;
+ ata_pci_bmdma_init(host);
devres_remove_group(&pdev->dev, NULL);
*r_host = host;
return 0;
-err_bmdma:
- /* This is necessary because PCI and iomap resources are
- * merged and releasing the top group won't release the
- * acquired resources if some of those have been acquired
- * before entering this function.
- */
- pcim_iounmap_regions(pdev, 0xf);
err_out:
devres_release_group(&pdev->dev, NULL);
return rc;
EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
#endif /* CONFIG_PCI */
+
+const struct ata_port_operations ata_bmdma_port_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .qc_prep = ata_bmdma_qc_prep,
+ .qc_issue = ata_bmdma_qc_issue,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .port_start = ata_bmdma_port_start,
+};
+EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
+
+const struct ata_port_operations ata_bmdma32_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .sff_data_xfer = ata_sff_data_xfer32,
+ .port_start = ata_bmdma_port_start32,
+};
+EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
+
+/**
+ * ata_bmdma_fill_sg - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_bmdma_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_bmdma_prd *prd = ap->bmdma_prd;
+ struct scatterlist *sg;
+ unsigned int si, pi;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, offset;
+ u32 sg_len, len;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ prd[pi].addr = cpu_to_le32(addr);
+ prd[pi].flags_len = cpu_to_le32(len & 0xffff);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+ pi++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ * ata_bmdma_fill_sg_dumb - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command. Perform the fill
+ * so that we avoid writing any length 64K records for
+ * controllers that don't follow the spec.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_bmdma_fill_sg_dumb(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_bmdma_prd *prd = ap->bmdma_prd;
+ struct scatterlist *sg;
+ unsigned int si, pi;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, offset;
+ u32 sg_len, len, blen;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ blen = len & 0xffff;
+ prd[pi].addr = cpu_to_le32(addr);
+ if (blen == 0) {
+ /* Some PATA chipsets like the CS5530 can't
+ cope with 0x0000 meaning 64K as the spec
+ says */
+ prd[pi].flags_len = cpu_to_le32(0x8000);
+ blen = 0x8000;
+ prd[++pi].addr = cpu_to_le32(addr + 0x8000);
+ }
+ prd[pi].flags_len = cpu_to_le32(blen);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+ pi++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ * ata_bmdma_qc_prep - Prepare taskfile for submission
+ * @qc: Metadata associated with taskfile to be prepared
+ *
+ * Prepare ATA taskfile for submission.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ ata_bmdma_fill_sg(qc);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_qc_prep);
+
+/**
+ * ata_bmdma_dumb_qc_prep - Prepare taskfile for submission
+ * @qc: Metadata associated with taskfile to be prepared
+ *
+ * Prepare ATA taskfile for submission.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ ata_bmdma_fill_sg_dumb(qc);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_dumb_qc_prep);
+
+/**
+ * ata_bmdma_qc_issue - issue taskfile to a BMDMA controller
+ * @qc: command to issue to device
+ *
+ * This function issues a PIO, NODATA or DMA command to a
+ * SFF/BMDMA controller. PIO and NODATA are handled by
+ * ata_sff_qc_issue().
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, AC_ERR_* mask on failure
+ */
+unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* see ata_dma_blacklisted() */
+ BUG_ON((ap->flags & ATA_FLAG_PIO_POLLING) &&
+ qc->tf.protocol == ATAPI_PROT_DMA);
+
+ /* defer PIO handling to sff_qc_issue */
+ if (!ata_is_dma(qc->tf.protocol))
+ return ata_sff_qc_issue(qc);
+
+ /* select the device */
+ ata_dev_select(ap, qc->dev->devno, 1, 0);
+
+ /* start the command */
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->bmdma_setup(qc); /* set up bmdma */
+ ap->ops->bmdma_start(qc); /* initiate bmdma */
+ ap->hsm_task_state = HSM_ST_LAST;
+ break;
+
+ case ATAPI_PROT_DMA:
+ WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->bmdma_setup(qc); /* set up bmdma */
+ ap->hsm_task_state = HSM_ST_FIRST;
+
+ /* send cdb by polling if no cdb interrupt */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ ata_sff_queue_pio_task(ap, 0);
+ break;
+
+ default:
+ WARN_ON(1);
+ return AC_ERR_SYSTEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue);
+
+/**
+ * ata_bmdma_error_handler - Stock error handler for BMDMA controller
+ * @ap: port to handle error for
+ *
+ * Stock error handler for BMDMA controller. It can handle both
+ * PATA and SATA controllers. Most BMDMA controllers should be
+ * able to use this EH as-is or with some added handling before
+ * and after.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_error_handler(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ bool thaw = false;
+
+ qc = __ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
+ qc = NULL;
+
+ /* reset PIO HSM and stop DMA engine */
+ spin_lock_irqsave(ap->lock, flags);
+
+ if (qc && ata_is_dma(qc->tf.protocol)) {
+ u8 host_stat;
+
+ host_stat = ap->ops->bmdma_status(ap);
+
+ /* BMDMA controllers indicate host bus error by
+ * setting DMA_ERR bit and timing out. As it wasn't
+ * really a timeout event, adjust error mask and
+ * cancel frozen state.
+ */
+ if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) {
+ qc->err_mask = AC_ERR_HOST_BUS;
+ thaw = true;
+ }
+
+ ap->ops->bmdma_stop(qc);
+
+ /* if we're gonna thaw, make sure IRQ is clear */
+ if (thaw) {
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+ }
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (thaw)
+ ata_eh_thaw_port(ap);
+
+ ata_sff_error_handler(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
+
+/**
+ * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for BMDMA
+ * @qc: internal command to clean up
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned long flags;
+
+ if (ata_is_dma(qc->tf.protocol)) {
+ spin_lock_irqsave(ap->lock, flags);
+ ap->ops->bmdma_stop(qc);
+ spin_unlock_irqrestore(ap->lock, flags);
+ }
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
+
+/**
+ * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+
+ /* load PRD table addr. */
+ mb(); /* make sure PRD table writes are visible to controller */
+ iowrite32(ap->bmdma_prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_setup);
+
+/**
+ * ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ u8 dmactl;
+
+ /* start host DMA transaction */
+ dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+ /* Strictly, one may wish to issue an ioread8() here, to
+ * flush the mmio write. However, control also passes
+ * to the hardware at this point, and it will interrupt
+ * us when we are to resume control. So, in effect,
+ * we don't care when the mmio write flushes.
+ * Further, a read of the DMA status register _immediately_
+ * following the write may not be what certain flaky hardware
+ * is expected, so I think it is best to not add a readb()
+ * without first all the MMIO ATA cards/mobos.
+ * Or maybe I'm just being paranoid.
+ *
+ * FIXME: The posting of this write means I/O starts are
+ * unneccessarily delayed for MMIO
+ */
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_start);
+
+/**
+ * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @qc: Command we are ending DMA for
+ *
+ * Clears the ATA_DMA_START flag in the dma control register
+ *
+ * May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ /* clear start/stop bit */
+ iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
+ mmio + ATA_DMA_CMD);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_sff_dma_pause(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_stop);
+
+/**
+ * ata_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Read and return BMDMA status register.
+ *
+ * May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+u8 ata_bmdma_status(struct ata_port *ap)
+{
+ return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_status);
+
+
+/**
+ * ata_bmdma_port_start - Set port up for bmdma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start(struct ata_port *ap)
+{
+ if (ap->mwdma_mask || ap->udma_mask) {
+ ap->bmdma_prd =
+ dmam_alloc_coherent(ap->host->dev, ATA_PRD_TBL_SZ,
+ &ap->bmdma_prd_dma, GFP_KERNEL);
+ if (!ap->bmdma_prd)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start);
+
+/**
+ * ata_bmdma_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Enables 32bit PIO and allocates space for PRD
+ * table.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ return ata_bmdma_port_start(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
+
+#ifdef CONFIG_PCI
+
+/**
+ * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
+ * @pdev: PCI device
+ *
+ * Some PCI ATA devices report simplex mode but in fact can be told to
+ * enter non simplex mode. This implements the necessary logic to
+ * perform the task on such devices. Calling it on other devices will
+ * have -undefined- behaviour.
+ */
+int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
+{
+ unsigned long bmdma = pci_resource_start(pdev, 4);
+ u8 simplex;
+
+ if (bmdma == 0)
+ return -ENOENT;
+
+ simplex = inb(bmdma + 0x02);
+ outb(simplex & 0x60, bmdma + 0x02);
+ simplex = inb(bmdma + 0x02);
+ if (simplex & 0x80)
+ return -EOPNOTSUPP;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+
+static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
+{
+ int i;
+
+ dev_printk(KERN_ERR, host->dev, "BMDMA: %s, falling back to PIO\n",
+ reason);
+
+ for (i = 0; i < 2; i++) {
+ host->ports[i]->mwdma_mask = 0;
+ host->ports[i]->udma_mask = 0;
+ }
+}
+
+/**
+ * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
+ * @host: target ATA host
+ *
+ * Acquire PCI BMDMA resources and initialize @host accordingly.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ */
+void ata_pci_bmdma_init(struct ata_host *host)
+{
+ struct device *gdev = host->dev;
+ struct pci_dev *pdev = to_pci_dev(gdev);
+ int i, rc;
+
+ /* No BAR4 allocation: No DMA */
+ if (pci_resource_start(pdev, 4) == 0) {
+ ata_bmdma_nodma(host, "BAR4 is zero");
+ return;
+ }
+
+ /*
+ * Some controllers require BMDMA region to be initialized
+ * even if DMA is not in use to clear IRQ status via
+ * ->sff_irq_clear method. Try to initialize bmdma_addr
+ * regardless of dma masks.
+ */
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ ata_bmdma_nodma(host, "failed to set dma mask");
+ if (!rc) {
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ ata_bmdma_nodma(host,
+ "failed to set consistent dma mask");
+ }
+
+ /* request and iomap DMA region */
+ rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
+ if (rc) {
+ ata_bmdma_nodma(host, "failed to request/iomap BAR4");
+ return;
+ }
+ host->iomap = pcim_iomap_table(pdev);
+
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+ void __iomem *bmdma = host->iomap[4] + 8 * i;
+
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ ap->ioaddr.bmdma_addr = bmdma;
+ if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (ioread8(bmdma + 2) & 0x80))
+ host->flags |= ATA_HOST_SIMPLEX;
+
+ ata_port_desc(ap, "bmdma 0x%llx",
+ (unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
+ }
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
+
+#endif /* CONFIG_PCI */
+
+/**
+ * ata_sff_port_init - Initialize SFF/BMDMA ATA port
+ * @ap: Port to initialize
+ *
+ * Called on port allocation to initialize SFF/BMDMA specific
+ * fields.
+ *
+ * LOCKING:
+ * None.
+ */
+void ata_sff_port_init(struct ata_port *ap)
+{
+ INIT_DELAYED_WORK(&ap->sff_pio_task, ata_sff_pio_task);
+ ap->ctl = ATA_DEVCTL_OBS;
+ ap->last_ctl = 0xFF;
+}
+
+int __init ata_sff_init(void)
+{
+ /*
+ * FIXME: In UP case, there is only one workqueue thread and if you
+ * have more than one PIO device, latency is bloody awful, with
+ * occasional multi-second "hiccups" as one PIO device waits for
+ * another. It's an ugly wart that users DO occasionally complain
+ * about; luckily most users have at most one PIO polled device.
+ */
+ ata_sff_wq = create_workqueue("ata_sff");
+ if (!ata_sff_wq)
+ return -ENOMEM;
+
+ return 0;
+}
+
+void __exit ata_sff_exit(void)
+{
+ destroy_workqueue(ata_sff_wq);
+}
git.openpandora.org / pandora-kernel.git / blobdiff