#include "libata.h"
+#define DRV_VERSION "2.10" /* must be exactly four chars */
+
+
/* debounce timing parameters in msecs { interval, duration, timeout } */
const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 };
const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 };
module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
+int noacpi;
+module_param(noacpi, int, 0444);
+MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
}
/**
- * ata_pio_devchk - PATA device presence detection
- * @ap: ATA channel to examine
- * @device: Device to examine (starting at zero)
- *
- * This technique was originally described in
- * Hale Landis's ATADRVR (www.ata-atapi.com), and
- * later found its way into the ATA/ATAPI spec.
- *
- * Write a pattern to the ATA shadow registers,
- * and if a device is present, it will respond by
- * correctly storing and echoing back the
- * ATA shadow register contents.
- *
- * LOCKING:
- * caller.
- */
-
-static unsigned int ata_pio_devchk(struct ata_port *ap,
- unsigned int device)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 nsect, lbal;
-
- ap->ops->dev_select(ap, device);
-
- outb(0x55, ioaddr->nsect_addr);
- outb(0xaa, ioaddr->lbal_addr);
-
- outb(0xaa, ioaddr->nsect_addr);
- outb(0x55, ioaddr->lbal_addr);
-
- outb(0x55, ioaddr->nsect_addr);
- outb(0xaa, ioaddr->lbal_addr);
-
- nsect = inb(ioaddr->nsect_addr);
- lbal = inb(ioaddr->lbal_addr);
-
- if ((nsect == 0x55) && (lbal == 0xaa))
- return 1; /* we found a device */
-
- return 0; /* nothing found */
-}
-
-/**
- * ata_mmio_devchk - PATA device presence detection
+ * ata_devchk - PATA device presence detection
* @ap: ATA channel to examine
* @device: Device to examine (starting at zero)
*
* caller.
*/
-static unsigned int ata_mmio_devchk(struct ata_port *ap,
- unsigned int device)
+static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
u8 nsect, lbal;
ap->ops->dev_select(ap, device);
- writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
- writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
+ iowrite8(0x55, ioaddr->nsect_addr);
+ iowrite8(0xaa, ioaddr->lbal_addr);
- writeb(0xaa, (void __iomem *) ioaddr->nsect_addr);
- writeb(0x55, (void __iomem *) ioaddr->lbal_addr);
+ iowrite8(0xaa, ioaddr->nsect_addr);
+ iowrite8(0x55, ioaddr->lbal_addr);
- writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
- writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
+ iowrite8(0x55, ioaddr->nsect_addr);
+ iowrite8(0xaa, ioaddr->lbal_addr);
- nsect = readb((void __iomem *) ioaddr->nsect_addr);
- lbal = readb((void __iomem *) ioaddr->lbal_addr);
+ nsect = ioread8(ioaddr->nsect_addr);
+ lbal = ioread8(ioaddr->lbal_addr);
if ((nsect == 0x55) && (lbal == 0xaa))
return 1; /* we found a device */
return 0; /* nothing found */
}
-/**
- * ata_devchk - PATA device presence detection
- * @ap: ATA channel to examine
- * @device: Device to examine (starting at zero)
- *
- * Dispatch ATA device presence detection, depending
- * on whether we are using PIO or MMIO to talk to the
- * ATA shadow registers.
- *
- * LOCKING:
- * caller.
- */
-
-static unsigned int ata_devchk(struct ata_port *ap,
- unsigned int device)
-{
- if (ap->flags & ATA_FLAG_MMIO)
- return ata_mmio_devchk(ap, device);
- return ata_pio_devchk(ap, device);
-}
-
/**
* ata_dev_classify - determine device type based on ATA-spec signature
* @tf: ATA taskfile register set for device to be identified
else
tmp = ATA_DEVICE_OBS | ATA_DEV1;
- if (ap->flags & ATA_FLAG_MMIO) {
- writeb(tmp, (void __iomem *) ap->ioaddr.device_addr);
- } else {
- outb(tmp, ap->ioaddr.device_addr);
- }
+ iowrite8(tmp, ap->ioaddr.device_addr);
ata_pause(ap); /* needed; also flushes, for mmio */
}
}
tf.protocol = ATA_PROT_PIO;
- tf.flags |= ATA_TFLAG_POLLING; /* for polling presence detection */
+
+ /* Some devices choke if TF registers contain garbage. Make
+ * sure those are properly initialized.
+ */
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+
+ /* Device presence detection is unreliable on some
+ * controllers. Always poll IDENTIFY if available.
+ */
+ tf.flags |= ATA_TFLAG_POLLING;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS);
const u16 *id = dev->id;
unsigned int xfer_mask;
char revbuf[7]; /* XYZ-99\0 */
+ char fwrevbuf[ATA_ID_FW_REV_LEN+1];
+ char modelbuf[ATA_ID_PROD_LEN+1];
int rc;
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
__FUNCTION__, ap->id, dev->devno);
+ /* set _SDD */
+ rc = ata_acpi_push_id(ap, dev->devno);
+ if (rc) {
+ ata_dev_printk(dev, KERN_WARNING, "failed to set _SDD(%d)\n",
+ rc);
+ }
+
+ /* retrieve and execute the ATA task file of _GTF */
+ ata_acpi_exec_tfs(ap);
+
/* print device capabilities */
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG,
dev->n_sectors = ata_id_n_sectors(id);
+ /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
+ ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
+ sizeof(fwrevbuf));
+
+ ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD,
+ sizeof(modelbuf));
+
+ if (dev->id[59] & 0x100)
+ dev->multi_count = dev->id[59] & 0xff;
+
if (ata_id_has_lba(id)) {
const char *lba_desc;
char ncq_desc[20];
ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
/* print device info to dmesg */
- if (ata_msg_drv(ap) && print_info)
- ata_dev_printk(dev, KERN_INFO, "%s, "
- "max %s, %Lu sectors: %s %s\n",
- revbuf,
- ata_mode_string(xfer_mask),
+ if (ata_msg_drv(ap) && print_info) {
+ ata_dev_printk(dev, KERN_INFO,
+ "%s: %s, %s, max %s\n",
+ revbuf, modelbuf, fwrevbuf,
+ ata_mode_string(xfer_mask));
+ ata_dev_printk(dev, KERN_INFO,
+ "%Lu sectors, multi %u: %s %s\n",
(unsigned long long)dev->n_sectors,
- lba_desc, ncq_desc);
+ dev->multi_count, lba_desc, ncq_desc);
+ }
} else {
/* CHS */
}
/* print device info to dmesg */
- if (ata_msg_drv(ap) && print_info)
- ata_dev_printk(dev, KERN_INFO, "%s, "
- "max %s, %Lu sectors: CHS %u/%u/%u\n",
- revbuf,
- ata_mode_string(xfer_mask),
- (unsigned long long)dev->n_sectors,
- dev->cylinders, dev->heads,
- dev->sectors);
- }
-
- if (dev->id[59] & 0x100) {
- dev->multi_count = dev->id[59] & 0xff;
- if (ata_msg_drv(ap) && print_info)
+ if (ata_msg_drv(ap) && print_info) {
ata_dev_printk(dev, KERN_INFO,
- "ata%u: dev %u multi count %u\n",
- ap->id, dev->devno, dev->multi_count);
+ "%s: %s, %s, max %s\n",
+ revbuf, modelbuf, fwrevbuf,
+ ata_mode_string(xfer_mask));
+ ata_dev_printk(dev, KERN_INFO,
+ "%Lu sectors, multi %u, CHS %u/%u/%u\n",
+ (unsigned long long)dev->n_sectors,
+ dev->multi_count, dev->cylinders,
+ dev->heads, dev->sectors);
+ }
}
dev->cdb_len = 16;
dev->flags |= ATA_DFLAG_PIO;
err_mask = ata_dev_set_xfermode(dev);
+ /* Old CFA may refuse this command, which is just fine */
+ if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id))
+ err_mask &= ~AC_ERR_DEV;
+
if (err_mask) {
ata_dev_printk(dev, KERN_ERR, "failed to set xfermode "
"(err_mask=0x%x)\n", err_mask);
u8 nsect, lbal;
ap->ops->dev_select(ap, 1);
- if (ap->flags & ATA_FLAG_MMIO) {
- nsect = readb((void __iomem *) ioaddr->nsect_addr);
- lbal = readb((void __iomem *) ioaddr->lbal_addr);
- } else {
- nsect = inb(ioaddr->nsect_addr);
- lbal = inb(ioaddr->lbal_addr);
- }
+ nsect = ioread8(ioaddr->nsect_addr);
+ lbal = ioread8(ioaddr->lbal_addr);
if ((nsect == 1) && (lbal == 1))
break;
if (time_after(jiffies, timeout)) {
DPRINTK("ata%u: bus reset via SRST\n", ap->id);
/* software reset. causes dev0 to be selected */
- if (ap->flags & ATA_FLAG_MMIO) {
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- udelay(20); /* FIXME: flush */
- writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr);
- udelay(20); /* FIXME: flush */
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- } else {
- outb(ap->ctl, ioaddr->ctl_addr);
- udelay(10);
- outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
- udelay(10);
- outb(ap->ctl, ioaddr->ctl_addr);
- }
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
+ udelay(20); /* FIXME: flush */
+ iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+ udelay(20); /* FIXME: flush */
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
/* spec mandates ">= 2ms" before checking status.
* We wait 150ms, because that was the magic delay used for
ap->device[1].class = ata_dev_try_classify(ap, 1, &err);
/* re-enable interrupts */
- if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
- ata_irq_on(ap);
+ ap->ops->irq_on(ap);
/* is double-select really necessary? */
if (ap->device[1].class != ATA_DEV_NONE)
if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
/* set up device control for ATA_FLAG_SATA_RESET */
- if (ap->flags & ATA_FLAG_MMIO)
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- else
- outb(ap->ctl, ioaddr->ctl_addr);
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
}
DPRINTK("EXIT\n");
return 0;
}
+ /* wait a while before checking status, see SRST for more info */
+ msleep(150);
+
if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
ata_port_printk(ap, KERN_ERR,
"COMRESET failed (device not ready)\n");
sata_scr_write(ap, SCR_ERROR, serror);
/* re-enable interrupts */
- if (!ap->ops->error_handler) {
- /* FIXME: hack. create a hook instead */
- if (ap->ioaddr.ctl_addr)
- ata_irq_on(ap);
- }
+ if (!ap->ops->error_handler)
+ ap->ops->irq_on(ap);
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
}
/* set up device control */
- if (ap->ioaddr.ctl_addr) {
- if (ap->flags & ATA_FLAG_MMIO)
- writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
- else
- outb(ap->ctl, ap->ioaddr.ctl_addr);
- }
+ if (ap->ioaddr.ctl_addr)
+ iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
DPRINTK("EXIT\n");
}
}
/**
- * ata_mmio_data_xfer - Transfer data by MMIO
- * @adev: device for this I/O
- * @buf: data buffer
- * @buflen: buffer length
- * @write_data: read/write
- *
- * Transfer data from/to the device data register by MMIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
-{
- struct ata_port *ap = adev->ap;
- unsigned int i;
- unsigned int words = buflen >> 1;
- u16 *buf16 = (u16 *) buf;
- void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr;
-
- /* Transfer multiple of 2 bytes */
- if (write_data) {
- for (i = 0; i < words; i++)
- writew(le16_to_cpu(buf16[i]), mmio);
- } else {
- for (i = 0; i < words; i++)
- buf16[i] = cpu_to_le16(readw(mmio));
- }
-
- /* Transfer trailing 1 byte, if any. */
- if (unlikely(buflen & 0x01)) {
- u16 align_buf[1] = { 0 };
- unsigned char *trailing_buf = buf + buflen - 1;
-
- if (write_data) {
- memcpy(align_buf, trailing_buf, 1);
- writew(le16_to_cpu(align_buf[0]), mmio);
- } else {
- align_buf[0] = cpu_to_le16(readw(mmio));
- memcpy(trailing_buf, align_buf, 1);
- }
- }
-}
-
-/**
- * ata_pio_data_xfer - Transfer data by PIO
+ * ata_data_xfer - Transfer data by PIO
* @adev: device to target
* @buf: data buffer
* @buflen: buffer length
* LOCKING:
* Inherited from caller.
*/
-
-void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+void ata_data_xfer(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->ap;
unsigned int words = buflen >> 1;
/* Transfer multiple of 2 bytes */
if (write_data)
- outsw(ap->ioaddr.data_addr, buf, words);
+ iowrite16_rep(ap->ioaddr.data_addr, buf, words);
else
- insw(ap->ioaddr.data_addr, buf, words);
+ ioread16_rep(ap->ioaddr.data_addr, buf, words);
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
if (write_data) {
memcpy(align_buf, trailing_buf, 1);
- outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
+ iowrite16(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
} else {
- align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr));
+ align_buf[0] = cpu_to_le16(ioread16(ap->ioaddr.data_addr));
memcpy(trailing_buf, align_buf, 1);
}
}
}
/**
- * ata_pio_data_xfer_noirq - Transfer data by PIO
+ * ata_data_xfer_noirq - Transfer data by PIO
* @adev: device to target
* @buf: data buffer
* @buflen: buffer length
* LOCKING:
* Inherited from caller.
*/
-
-void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int write_data)
{
unsigned long flags;
local_irq_save(flags);
- ata_pio_data_xfer(adev, buf, buflen, write_data);
+ ata_data_xfer(adev, buf, buflen, write_data);
local_irq_restore(flags);
}
qc = ata_qc_from_tag(ap, qc->tag);
if (qc) {
if (likely(!(qc->err_mask & AC_ERR_HSM))) {
- ata_irq_on(ap);
+ ap->ops->irq_on(ap);
ata_qc_complete(qc);
} else
ata_port_freeze(ap);
} else {
if (in_wq) {
spin_lock_irqsave(ap->lock, flags);
- ata_irq_on(ap);
+ ap->ops->irq_on(ap);
ata_qc_complete(qc);
spin_unlock_irqrestore(ap->lock, flags);
} else
#ifdef ATA_IRQ_TRAP
if ((ap->stats.idle_irq % 1000) == 0) {
- ata_irq_ack(ap, 0); /* debug trap */
+ ap->ops->irq_ack(ap, 0); /* debug trap */
ata_port_printk(ap, KERN_WARNING, "irq trap\n");
return 1;
}
host->n_ports = ent->n_ports;
host->irq = ent->irq;
host->irq2 = ent->irq2;
- host->mmio_base = ent->mmio_base;
+ host->iomap = ent->iomap;
host->private_data = ent->private_data;
/* register each port bound to this device */
(ap->pio_mask << ATA_SHIFT_PIO);
/* print per-port info to dmesg */
- ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX "
- "ctl 0x%lX bmdma 0x%lX irq %d\n",
+ ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
+ "ctl 0x%p bmdma 0x%p irq %d\n",
ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
ata_mode_string(xfer_mode_mask),
ap->ioaddr.cmd_addr,
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_interrupt);
-EXPORT_SYMBOL_GPL(ata_mmio_data_xfer);
-EXPORT_SYMBOL_GPL(ata_pio_data_xfer);
-EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq);
+EXPORT_SYMBOL_GPL(ata_data_xfer);
+EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
EXPORT_SYMBOL_GPL(ata_qc_prep);
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
EXPORT_SYMBOL_GPL(ata_do_eh);
+EXPORT_SYMBOL_GPL(ata_irq_on);
+EXPORT_SYMBOL_GPL(ata_dummy_irq_on);
+EXPORT_SYMBOL_GPL(ata_irq_ack);
+EXPORT_SYMBOL_GPL(ata_dummy_irq_ack);