static int atapi_enabled = 1;
module_param(atapi_enabled, int, 0444);
-MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
static int atapi_dmadir = 0;
module_param(atapi_dmadir, int, 0444);
-MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
int atapi_passthru16 = 1;
module_param(atapi_passthru16, int, 0444);
-MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
-MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
static int ata_ignore_hpa;
module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
int libata_noacpi = 0;
module_param_named(noacpi, libata_noacpi, int, 0444);
-MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set");
+MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
int libata_allow_tpm = 0;
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
-MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands");
+MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
* Check if the current speed of the device requires IORDY. Used
* by various controllers for chip configuration.
*/
-
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
{
- /* Controller doesn't support IORDY. Probably a pointless check
- as the caller should know this */
+ /* Don't set IORDY if we're preparing for reset. IORDY may
+ * lead to controller lock up on certain controllers if the
+ * port is not occupied. See bko#11703 for details.
+ */
+ if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
+ return 0;
+ /* Controller doesn't support IORDY. Probably a pointless
+ * check as the caller should know this.
+ */
if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
return 0;
/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
* Compute the highest mode possible if we are not using iordy. Return
* -1 if no iordy mode is available.
*/
-
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
{
/* If we have no drive specific rule, then PIO 2 is non IORDY */
{
int nr_done = 0;
u32 done_mask;
- int i;
done_mask = ap->qc_active ^ qc_active;
return -EINVAL;
}
- for (i = 0; i < ATA_MAX_QUEUE; i++) {
+ while (done_mask) {
struct ata_queued_cmd *qc;
+ unsigned int tag = __ffs(done_mask);
- if (!(done_mask & (1 << i)))
- continue;
-
- if ((qc = ata_qc_from_tag(ap, i))) {
+ qc = ata_qc_from_tag(ap, tag);
+ if (qc) {
ata_qc_complete(qc);
nr_done++;
}
+ done_mask &= ~(1 << tag);
}
return nr_done;