PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS,
PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
+ PIIX_FLAG_PIO16 = (1 << 30), /*support 16bit PIO only*/
+
PIIX_80C_PRI = (1 << 5) | (1 << 4),
PIIX_80C_SEC = (1 << 7) | (1 << 6),
ich8m_apple_sata, /* locks up on second port enable */
tolapai_sata,
piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
+ ich8_sata_snb,
};
struct piix_map_db {
static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
unsigned hints);
static bool piix_irq_check(struct ata_port *ap);
+static int piix_port_start(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
/* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (CPT) */
- { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (CPT) */
- { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (CPT) */
{ 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (CPT) */
{ 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (PBG) */
- { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (PBG) */
{ 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Panther Point) */
- { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (Panther Point) */
- { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (Panther Point) */
{ 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Panther Point) */
static struct ata_port_operations piix_sata_ops = {
.inherits = &ata_bmdma32_port_ops,
.sff_irq_check = piix_irq_check,
+ .port_start = piix_port_start,
};
static struct ata_port_operations piix_pata_ops = {
[ich8_2port_sata] = &ich8_2port_map_db,
[ich8m_apple_sata] = &ich8m_apple_map_db,
[tolapai_sata] = &tolapai_map_db,
+ [ich8_sata_snb] = &ich8_map_db,
};
static struct ata_port_info piix_port_info[] = {
.port_ops = &piix_vmw_ops,
},
+ /*
+ * some Sandybridge chipsets have broken 32 mode up to now,
+ * see https://bugzilla.kernel.org/show_bug.cgi?id=40592
+ */
+ [ich8_sata_snb] =
+ {
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_sata_ops,
+ },
+
};
static struct pci_bits piix_enable_bits[] = {
{ 0, }
};
+static int piix_port_start(struct ata_port *ap)
+{
+ if (!(ap->flags & PIIX_FLAG_PIO16))
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+
+ return ata_bmdma_port_start(ap);
+}
+
/**
* ich_pata_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
static DEFINE_SPINLOCK(piix_lock);
-/**
- * piix_set_piomode - Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set PIO mode for device, in host controller PCI config space.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void piix_set_timings(struct ata_port *ap, struct ata_device *adev,
+ u8 pio)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned long flags;
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
control |= 1; /* TIME1 enable */
if (ata_pio_need_iordy(adev))
control |= 2; /* IE enable */
-
/* Intel specifies that the PPE functionality is for disk only */
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ /*
+ * If the drive MWDMA is faster than it can do PIO then
+ * we must force PIO into PIO0
+ */
+ if (adev->pio_mode < XFER_PIO_0 + pio)
+ /* Enable DMA timing only */
+ control |= 8; /* PIO cycles in PIO0 */
spin_lock_irqsave(&piix_lock, flags);
if (is_slave) {
/* clear TIME1|IE1|PPE1|DTE1 */
master_data &= 0xff0f;
- /* Enable SITRE (separate slave timing register) */
- master_data |= 0x4000;
/* enable PPE1, IE1 and TIME1 as needed */
master_data |= (control << 4);
pci_read_config_byte(dev, slave_port, &slave_data);
(timings[pio][0] << 12) |
(timings[pio][1] << 8);
}
+
+ /* Enable SITRE (separate slave timing register) */
+ master_data |= 0x4000;
pci_write_config_word(dev, master_port, master_data);
if (is_slave)
pci_write_config_byte(dev, slave_port, slave_data);
spin_unlock_irqrestore(&piix_lock, flags);
}
+/**
+ * piix_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Drive in question
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ piix_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0);
+}
+
/**
* do_pata_set_dmamode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned long flags;
- u8 master_port = ap->port_no ? 0x42 : 0x40;
- u16 master_data;
u8 speed = adev->dma_mode;
int devid = adev->devno + 2 * ap->port_no;
u8 udma_enable = 0;
- static const /* ISP RTC */
- u8 timings[][2] = { { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- spin_lock_irqsave(&piix_lock, flags);
-
- pci_read_config_word(dev, master_port, &master_data);
- if (ap->udma_mask)
- pci_read_config_byte(dev, 0x48, &udma_enable);
-
if (speed >= XFER_UDMA_0) {
- unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+ unsigned int udma = speed - XFER_UDMA_0;
u16 udma_timing;
u16 ideconf;
int u_clock, u_speed;
+ spin_lock_irqsave(&piix_lock, flags);
+
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+
/*
* UDMA is handled by a combination of clock switching and
* selection of dividers
performance (WR_PingPong_En) */
pci_write_config_word(dev, 0x54, ideconf);
}
+
+ pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&piix_lock, flags);
} else {
- /*
- * MWDMA is driven by the PIO timings. We must also enable
- * IORDY unconditionally along with TIME1. PPE has already
- * been set when the PIO timing was set.
- */
- unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
- unsigned int control;
- u8 slave_data;
+ /* MWDMA is driven by the PIO timings. */
+ unsigned int mwdma = speed - XFER_MW_DMA_0;
const unsigned int needed_pio[3] = {
XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
};
int pio = needed_pio[mwdma] - XFER_PIO_0;
- control = 3; /* IORDY|TIME1 */
-
- /* If the drive MWDMA is faster than it can do PIO then
- we must force PIO into PIO0 */
-
- if (adev->pio_mode < needed_pio[mwdma])
- /* Enable DMA timing only */
- control |= 8; /* PIO cycles in PIO0 */
-
- if (adev->devno) { /* Slave */
- master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
- master_data |= control << 4;
- pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= (ap->port_no ? 0x0f : 0xf0);
- /* Load the matching timing */
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
- pci_write_config_byte(dev, 0x44, slave_data);
- } else { /* Master */
- master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
- and master timing bits */
- master_data |= control;
- master_data |=
- (timings[pio][0] << 12) |
- (timings[pio][1] << 8);
- }
-
- if (ap->udma_mask)
- udma_enable &= ~(1 << devid);
-
- pci_write_config_word(dev, master_port, master_data);
+ /* XFER_PIO_0 is never used currently */
+ piix_set_timings(ap, adev, pio);
}
- /* Don't scribble on 0x48 if the controller does not support UDMA */
- if (ap->udma_mask)
- pci_write_config_byte(dev, 0x48, udma_enable);
-
- spin_unlock_irqrestore(&piix_lock, flags);
}
/**
git.openpandora.org / pandora-kernel.git / blobdiff