#include <asm/pci-direct.h>
#include <asm/system.h>
#include <asm/dma.h>
+#include <asm/rio.h>
+
+#ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT
+int use_calgary __read_mostly = 1;
+#else
+int use_calgary __read_mostly = 0;
+#endif /* CONFIG_CALGARY_DEFAULT_ENABLED */
#define PCI_DEVICE_ID_IBM_CALGARY 0x02a1
#define PCI_VENDOR_DEVICE_ID_CALGARY \
#define ONE_BASED_CHASSIS_NUM 1
/* register offsets inside the host bridge space */
-#define PHB_CSR_OFFSET 0x0110
+#define CALGARY_CONFIG_REG 0x0108
+#define PHB_CSR_OFFSET 0x0110 /* Channel Status */
#define PHB_PLSSR_OFFSET 0x0120
#define PHB_CONFIG_RW_OFFSET 0x0160
#define PHB_IOBASE_BAR_LOW 0x0170
#define TAR_VALID 0x0000000000000008UL
/* CSR (Channel/DMA Status Register) */
#define CSR_AGENT_MASK 0xffe0ffff
+/* CCR (Calgary Configuration Register) */
+#define CCR_2SEC_TIMEOUT 0x000000000000000EUL
#define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */
#define MAX_NUM_CHASSIS 8 /* max number of chassis */
0xB000 /* PHB3 */
};
+/* PHB debug registers */
+
+static const unsigned long phb_debug_offsets[] = {
+ 0x4000 /* PHB 0 DEBUG */,
+ 0x5000 /* PHB 1 DEBUG */,
+ 0x6000 /* PHB 2 DEBUG */,
+ 0x7000 /* PHB 3 DEBUG */
+};
+
+/*
+ * STUFF register for each debug PHB,
+ * byte 1 = start bus number, byte 2 = end bus number
+ */
+
+#define PHB_DEBUG_STUFF_OFFSET 0x0020
+
unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED;
static int translate_empty_slots __read_mostly = 0;
static int calgary_detected __read_mostly = 0;
+static struct rio_table_hdr *rio_table_hdr __initdata;
+static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
+static struct rio_detail *rio_devs[MAX_NUMNODES * 4] __initdata;
+
struct calgary_bus_info {
void *tce_space;
unsigned char translation_disabled;
signed char phbid;
+ void __iomem *bbar;
};
static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
.unmap_sg = calgary_unmap_sg,
};
+static inline void __iomem * busno_to_bbar(unsigned char num)
+{
+ return bus_info[num].bbar;
+}
+
static inline int busno_to_phbid(unsigned char num)
{
return bus_info[num].phbid;
static void __init calgary_reserve_regions(struct pci_dev *dev)
{
unsigned int npages;
- void __iomem *bbar;
- unsigned char busnum;
u64 start;
struct iommu_table *tbl = dev->sysdata;
- bbar = tbl->bbar;
- busnum = dev->bus->number;
-
/* reserve bad_dma_address in case it's a legal address */
iommu_range_reserve(tbl, bad_dma_address, 1);
}
}
+static void __init calgary_increase_split_completion_timeout(void __iomem *bbar,
+ unsigned char busnum)
+{
+ u64 val64;
+ void __iomem *target;
+ unsigned int phb_shift = ~0; /* silence gcc */
+ u64 mask;
+
+ switch (busno_to_phbid(busnum)) {
+ case 0: phb_shift = (63 - 19);
+ break;
+ case 1: phb_shift = (63 - 23);
+ break;
+ case 2: phb_shift = (63 - 27);
+ break;
+ case 3: phb_shift = (63 - 35);
+ break;
+ default:
+ BUG_ON(busno_to_phbid(busnum));
+ }
+
+ target = calgary_reg(bbar, CALGARY_CONFIG_REG);
+ val64 = be64_to_cpu(readq(target));
+
+ /* zero out this PHB's timer bits */
+ mask = ~(0xFUL << phb_shift);
+ val64 &= mask;
+ val64 |= (CCR_2SEC_TIMEOUT << phb_shift);
+ writeq(cpu_to_be64(val64), target);
+ readq(target); /* flush */
+}
+
static void __init calgary_enable_translation(struct pci_dev *dev)
{
u32 val32;
writel(cpu_to_be32(val32), target);
readl(target); /* flush */
+ /*
+ * Give split completion a longer timeout on bus 1 for aic94xx
+ * http://bugzilla.kernel.org/show_bug.cgi?id=7180
+ */
+ if (busnum == 1)
+ calgary_increase_split_completion_timeout(bbar, busnum);
+
init_timer(&tbl->watchdog_timer);
tbl->watchdog_timer.function = &calgary_watchdog;
tbl->watchdog_timer.data = (unsigned long)dev;
del_timer_sync(&tbl->watchdog_timer);
}
-static inline unsigned int __init locate_register_space(struct pci_dev *dev)
-{
- int rionodeid;
- u32 address;
-
- /*
- * Each Calgary has four busses. The first four busses (first Calgary)
- * have RIO node ID 2, then the next four (second Calgary) have RIO
- * node ID 3, the next four (third Calgary) have node ID 2 again, etc.
- * We use a gross hack - relying on the dev->bus->number ordering,
- * modulo 14 - to decide which Calgary a given bus is on. Busses 0, 1,
- * 2 and 4 are on the first Calgary (id 2), 6, 8, a and c are on the
- * second (id 3), and then it repeats modulo 14.
- */
- rionodeid = (dev->bus->number % 14 > 4) ? 3 : 2;
- /*
- * register space address calculation as follows:
- * FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase)
- * ChassisBase is always zero for x366/x260/x460
- * RioNodeId is 2 for first Calgary, 3 for second Calgary
- */
- address = START_ADDRESS -
- (0x800000 * (ONE_BASED_CHASSIS_NUM + dev->bus->number / 14)) +
- (0x100000) * (rionodeid - CHASSIS_BASE);
- return address;
-}
-
static void __init calgary_init_one_nontraslated(struct pci_dev *dev)
{
pci_dev_get(dev);
static int __init calgary_init_one(struct pci_dev *dev)
{
- u32 address;
void __iomem *bbar;
int ret;
BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM);
- address = locate_register_space(dev);
- /* map entire 1MB of Calgary config space */
- bbar = ioremap_nocache(address, 1024 * 1024);
- if (!bbar) {
- ret = -ENODATA;
- goto done;
- }
-
+ bbar = busno_to_bbar(dev->bus->number);
ret = calgary_setup_tar(dev, bbar);
if (ret)
- goto iounmap;
+ goto done;
pci_dev_get(dev);
dev->bus->self = dev;
return 0;
-iounmap:
- iounmap(bbar);
done:
return ret;
}
+static int __init calgary_locate_bbars(void)
+{
+ int ret;
+ int rioidx, phb, bus;
+ void __iomem *bbar;
+ void __iomem *target;
+ unsigned long offset;
+ u8 start_bus, end_bus;
+ u32 val;
+
+ ret = -ENODATA;
+ for (rioidx = 0; rioidx < rio_table_hdr->num_rio_dev; rioidx++) {
+ struct rio_detail *rio = rio_devs[rioidx];
+
+ if ((rio->type != COMPAT_CALGARY) && (rio->type != ALT_CALGARY))
+ continue;
+
+ /* map entire 1MB of Calgary config space */
+ bbar = ioremap_nocache(rio->BBAR, 1024 * 1024);
+ if (!bbar)
+ goto error;
+
+ for (phb = 0; phb < PHBS_PER_CALGARY; phb++) {
+ offset = phb_debug_offsets[phb] | PHB_DEBUG_STUFF_OFFSET;
+ target = calgary_reg(bbar, offset);
+
+ val = be32_to_cpu(readl(target));
+ start_bus = (u8)((val & 0x00FF0000) >> 16);
+ end_bus = (u8)((val & 0x0000FF00) >> 8);
+ for (bus = start_bus; bus <= end_bus; bus++) {
+ bus_info[bus].bbar = bbar;
+ bus_info[bus].phbid = phb;
+ }
+ }
+ }
+
+ return 0;
+
+error:
+ /* scan bus_info and iounmap any bbars we previously ioremap'd */
+ for (bus = 0; bus < ARRAY_SIZE(bus_info); bus++)
+ if (bus_info[bus].bbar)
+ iounmap(bus_info[bus].bbar);
+
+ return ret;
+}
+
static int __init calgary_init(void)
{
- int ret = -ENODEV;
+ int ret;
struct pci_dev *dev = NULL;
+ ret = calgary_locate_bbars();
+ if (ret)
+ return ret;
+
do {
dev = pci_get_device(PCI_VENDOR_ID_IBM,
PCI_DEVICE_ID_IBM_CALGARY,
error:
do {
- dev = pci_find_device_reverse(PCI_VENDOR_ID_IBM,
+ dev = pci_get_device_reverse(PCI_VENDOR_ID_IBM,
PCI_DEVICE_ID_IBM_CALGARY,
dev);
if (!dev)
return ret;
}
+static int __init build_detail_arrays(void)
+{
+ unsigned long ptr;
+ int i, scal_detail_size, rio_detail_size;
+
+ if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+ printk(KERN_WARNING
+ "Calgary: MAX_NUMNODES too low! Defined as %d, "
+ "but system has %d nodes.\n",
+ MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ return -ENODEV;
+ }
+
+ switch (rio_table_hdr->version){
+ case 2:
+ scal_detail_size = 11;
+ rio_detail_size = 13;
+ break;
+ case 3:
+ scal_detail_size = 12;
+ rio_detail_size = 15;
+ break;
+ default:
+ printk(KERN_WARNING
+ "Calgary: Invalid Rio Grande Table Version: %d\n",
+ rio_table_hdr->version);
+ return -EPROTO;
+ }
+
+ ptr = ((unsigned long)rio_table_hdr) + 3;
+ for (i = 0; i < rio_table_hdr->num_scal_dev;
+ i++, ptr += scal_detail_size)
+ scal_devs[i] = (struct scal_detail *)ptr;
+
+ for (i = 0; i < rio_table_hdr->num_rio_dev;
+ i++, ptr += rio_detail_size)
+ rio_devs[i] = (struct rio_detail *)ptr;
+
+ return 0;
+}
+
void __init detect_calgary(void)
{
u32 val;
int bus;
void *tbl;
int calgary_found = 0;
- int phb = -1;
+ unsigned long ptr;
+ unsigned int offset, prev_offset;
+ int ret;
/*
* if the user specified iommu=off or iommu=soft or we found
if (swiotlb || no_iommu || iommu_detected)
return;
+ if (!use_calgary)
+ return;
+
if (!early_pci_allowed())
return;
+ printk(KERN_DEBUG "Calgary: detecting Calgary via BIOS EBDA area\n");
+
+ ptr = (unsigned long)phys_to_virt(get_bios_ebda());
+
+ rio_table_hdr = NULL;
+ prev_offset = 0;
+ offset = 0x180;
+ /*
+ * The next offset is stored in the 1st word.
+ * Only parse up until the offset increases:
+ */
+ while (offset > prev_offset) {
+ /* The block id is stored in the 2nd word */
+ if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+ /* set the pointer past the offset & block id */
+ rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
+ break;
+ }
+ prev_offset = offset;
+ offset = *((unsigned short *)(ptr + offset));
+ }
+ if (!rio_table_hdr) {
+ printk(KERN_DEBUG "Calgary: Unable to locate Rio Grande table "
+ "in EBDA - bailing!\n");
+ return;
+ }
+
+ ret = build_detail_arrays();
+ if (ret) {
+ printk(KERN_DEBUG "Calgary: build_detail_arrays ret %d\n", ret);
+ return;
+ }
+
specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
int dev;
struct calgary_bus_info *info = &bus_info[bus];
- info->phbid = -1;
if (read_pci_config(bus, 0, 0, 0) != PCI_VENDOR_DEVICE_ID_CALGARY)
continue;
- /*
- * There are 4 PHBs per Calgary chip. Set phb to which phb (0-3)
- * it is connected to releative to the clagary chip.
- */
- phb = (phb + 1) % PHBS_PER_CALGARY;
-
if (info->translation_disabled)
continue;
if (!tbl)
goto cleanup;
info->tce_space = tbl;
- info->phbid = phb;
calgary_found = 1;
break;
}
}
}
+ printk(KERN_DEBUG "Calgary: finished detection, Calgary %s\n",
+ calgary_found ? "found" : "not found");
+
if (calgary_found) {
iommu_detected = 1;
calgary_detected = 1;
git.openpandora.org / pandora-kernel.git / blobdiff