#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
-#include <asm/io.h>
-#include <asm/smp.h>
+#include <linux/io.h>
+#include <linux/smp.h>
#include <asm/io_apic.h>
#include <linux/irq.h>
#include <linux/acpi.h>
* and perform checksum verification.
*/
-static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
{
struct irq_routing_table *rt;
int i;
rt->size < sizeof(struct irq_routing_table))
return NULL;
sum = 0;
- for (i=0; i < rt->size; i++)
+ for (i = 0; i < rt->size; i++)
sum += addr[i];
if (!sum) {
DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
return rt;
printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
}
- for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
+ for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
rt = pirq_check_routing_table(addr);
if (rt)
return rt;
struct irq_info *e;
memset(busmap, 0, sizeof(busmap));
- for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
+ for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
e = &rt->slots[i];
#ifdef DEBUG
{
int j;
DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
- for(j=0; j<4; j++)
+ for (j = 0; j < 4; j++)
DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
DBG("\n");
}
#endif
busmap[e->bus] = 1;
}
- for(i = 1; i < 256; i++) {
+ for (i = 1; i < 256; i++) {
int node;
if (!busmap[i] || pci_find_bus(0, i))
continue;
static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
WARN_ON_ONCE(pirq > 4);
- return read_config_nybble(router,0x43, pirqmap[pirq-1]);
+ return read_config_nybble(router, 0x43, pirqmap[pirq-1]);
}
static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
/*
* Cyrix: nibble offset 0x5C
- * 0x5C bits 7:4 is INTB bits 3:0 is INTA
+ * 0x5C bits 7:4 is INTB bits 3:0 is INTA
* 0x5D bits 7:4 is INTD bits 3:0 is INTC
*/
static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
* Apparently there are systems implementing PCI routing table using
* link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
* We try our best to handle both link mappings.
- *
+ *
* Currently (2003-05-21) it appears most SiS chipsets follow the
* definition of routing registers from the SiS-5595 southbridge.
* According to the SiS 5595 datasheets the revision id's of the
*
* 0x62: USBIRQ:
* bit 6 OHCI function disabled (0), enabled (1)
- *
+ *
* 0x6a: ACPI/SCI IRQ: bits 4-6 reserved
*
* 0x7e: Data Acq. Module IRQ - bits 4-6 reserved
u8 irq;
irq = 0;
if (pirq <= 4)
- {
irq = read_config_nybble(router, 0x56, pirq - 1);
- }
printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
dev->vendor, dev->device, pirq, irq);
return irq;
static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
- printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
+ printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
dev->vendor, dev->device, pirq, irq);
if (pirq <= 4)
- {
write_config_nybble(router, 0x56, pirq - 1, irq);
- }
return 1;
}
if (pci_dev_present(pirq_440gx))
return 0;
- switch(device)
- {
- case PCI_DEVICE_ID_INTEL_82371FB_0:
- case PCI_DEVICE_ID_INTEL_82371SB_0:
- case PCI_DEVICE_ID_INTEL_82371AB_0:
- case PCI_DEVICE_ID_INTEL_82371MX:
- case PCI_DEVICE_ID_INTEL_82443MX_0:
- case PCI_DEVICE_ID_INTEL_82801AA_0:
- case PCI_DEVICE_ID_INTEL_82801AB_0:
- case PCI_DEVICE_ID_INTEL_82801BA_0:
- case PCI_DEVICE_ID_INTEL_82801BA_10:
- case PCI_DEVICE_ID_INTEL_82801CA_0:
- case PCI_DEVICE_ID_INTEL_82801CA_12:
- case PCI_DEVICE_ID_INTEL_82801DB_0:
- case PCI_DEVICE_ID_INTEL_82801E_0:
- case PCI_DEVICE_ID_INTEL_82801EB_0:
- case PCI_DEVICE_ID_INTEL_ESB_1:
- case PCI_DEVICE_ID_INTEL_ICH6_0:
- case PCI_DEVICE_ID_INTEL_ICH6_1:
- case PCI_DEVICE_ID_INTEL_ICH7_0:
- case PCI_DEVICE_ID_INTEL_ICH7_1:
- case PCI_DEVICE_ID_INTEL_ICH7_30:
- case PCI_DEVICE_ID_INTEL_ICH7_31:
- case PCI_DEVICE_ID_INTEL_ESB2_0:
- case PCI_DEVICE_ID_INTEL_ICH8_0:
- case PCI_DEVICE_ID_INTEL_ICH8_1:
- case PCI_DEVICE_ID_INTEL_ICH8_2:
- case PCI_DEVICE_ID_INTEL_ICH8_3:
- case PCI_DEVICE_ID_INTEL_ICH8_4:
- case PCI_DEVICE_ID_INTEL_ICH9_0:
- case PCI_DEVICE_ID_INTEL_ICH9_1:
- case PCI_DEVICE_ID_INTEL_ICH9_2:
- case PCI_DEVICE_ID_INTEL_ICH9_3:
- case PCI_DEVICE_ID_INTEL_ICH9_4:
- case PCI_DEVICE_ID_INTEL_ICH9_5:
- case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
- case PCI_DEVICE_ID_INTEL_ICH10_0:
- case PCI_DEVICE_ID_INTEL_ICH10_1:
- case PCI_DEVICE_ID_INTEL_ICH10_2:
- case PCI_DEVICE_ID_INTEL_ICH10_3:
- r->name = "PIIX/ICH";
- r->get = pirq_piix_get;
- r->set = pirq_piix_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_INTEL_82371FB_0:
+ case PCI_DEVICE_ID_INTEL_82371SB_0:
+ case PCI_DEVICE_ID_INTEL_82371AB_0:
+ case PCI_DEVICE_ID_INTEL_82371MX:
+ case PCI_DEVICE_ID_INTEL_82443MX_0:
+ case PCI_DEVICE_ID_INTEL_82801AA_0:
+ case PCI_DEVICE_ID_INTEL_82801AB_0:
+ case PCI_DEVICE_ID_INTEL_82801BA_0:
+ case PCI_DEVICE_ID_INTEL_82801BA_10:
+ case PCI_DEVICE_ID_INTEL_82801CA_0:
+ case PCI_DEVICE_ID_INTEL_82801CA_12:
+ case PCI_DEVICE_ID_INTEL_82801DB_0:
+ case PCI_DEVICE_ID_INTEL_82801E_0:
+ case PCI_DEVICE_ID_INTEL_82801EB_0:
+ case PCI_DEVICE_ID_INTEL_ESB_1:
+ case PCI_DEVICE_ID_INTEL_ICH6_0:
+ case PCI_DEVICE_ID_INTEL_ICH6_1:
+ case PCI_DEVICE_ID_INTEL_ICH7_0:
+ case PCI_DEVICE_ID_INTEL_ICH7_1:
+ case PCI_DEVICE_ID_INTEL_ICH7_30:
+ case PCI_DEVICE_ID_INTEL_ICH7_31:
+ case PCI_DEVICE_ID_INTEL_ESB2_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_1:
+ case PCI_DEVICE_ID_INTEL_ICH8_2:
+ case PCI_DEVICE_ID_INTEL_ICH8_3:
+ case PCI_DEVICE_ID_INTEL_ICH8_4:
+ case PCI_DEVICE_ID_INTEL_ICH9_0:
+ case PCI_DEVICE_ID_INTEL_ICH9_1:
+ case PCI_DEVICE_ID_INTEL_ICH9_2:
+ case PCI_DEVICE_ID_INTEL_ICH9_3:
+ case PCI_DEVICE_ID_INTEL_ICH9_4:
+ case PCI_DEVICE_ID_INTEL_ICH9_5:
+ case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
+ case PCI_DEVICE_ID_INTEL_ICH10_0:
+ case PCI_DEVICE_ID_INTEL_ICH10_1:
+ case PCI_DEVICE_ID_INTEL_ICH10_2:
+ case PCI_DEVICE_ID_INTEL_ICH10_3:
+ r->name = "PIIX/ICH";
+ r->get = pirq_piix_get;
+ r->set = pirq_piix_set;
+ return 1;
}
return 0;
}
* workarounds for some buggy BIOSes
*/
if (device == PCI_DEVICE_ID_VIA_82C586_0) {
- switch(router->device) {
+ switch (router->device) {
case PCI_DEVICE_ID_VIA_82C686:
/*
* Asus k7m bios wrongly reports 82C686A
}
}
- switch(device) {
+ switch (device) {
case PCI_DEVICE_ID_VIA_82C586_0:
r->name = "VIA";
r->get = pirq_via586_get;
static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_VLSI_82C534:
- r->name = "VLSI 82C534";
- r->get = pirq_vlsi_get;
- r->set = pirq_vlsi_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_VLSI_82C534:
+ r->name = "VLSI 82C534";
+ r->get = pirq_vlsi_get;
+ r->set = pirq_vlsi_set;
+ return 1;
}
return 0;
}
static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_SERVERWORKS_OSB4:
- case PCI_DEVICE_ID_SERVERWORKS_CSB5:
- r->name = "ServerWorks";
- r->get = pirq_serverworks_get;
- r->set = pirq_serverworks_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_SERVERWORKS_OSB4:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB5:
+ r->name = "ServerWorks";
+ r->get = pirq_serverworks_get;
+ r->set = pirq_serverworks_set;
+ return 1;
}
return 0;
}
{
if (device != PCI_DEVICE_ID_SI_503)
return 0;
-
+
r->name = "SIS";
r->get = pirq_sis_get;
r->set = pirq_sis_set;
static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_CYRIX_5520:
- r->name = "NatSemi";
- r->get = pirq_cyrix_get;
- r->set = pirq_cyrix_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_CYRIX_5520:
+ r->name = "NatSemi";
+ r->get = pirq_cyrix_get;
+ r->set = pirq_cyrix_set;
+ return 1;
}
return 0;
}
static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_OPTI_82C700:
- r->name = "OPTI";
- r->get = pirq_opti_get;
- r->set = pirq_opti_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_OPTI_82C700:
+ r->name = "OPTI";
+ r->get = pirq_opti_get;
+ r->set = pirq_opti_set;
+ return 1;
}
return 0;
}
static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_ITE_IT8330G_0:
- r->name = "ITE";
- r->get = pirq_ite_get;
- r->set = pirq_ite_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_ITE_IT8330G_0:
+ r->name = "ITE";
+ r->get = pirq_ite_get;
+ r->set = pirq_ite_set;
+ return 1;
}
return 0;
}
static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
+ switch (device) {
case PCI_DEVICE_ID_AL_M1533:
case PCI_DEVICE_ID_AL_M1563:
printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_AMD_VIPER_740B:
- r->name = "AMD756";
- break;
- case PCI_DEVICE_ID_AMD_VIPER_7413:
- r->name = "AMD766";
- break;
- case PCI_DEVICE_ID_AMD_VIPER_7443:
- r->name = "AMD768";
- break;
- default:
- return 0;
+ switch (device) {
+ case PCI_DEVICE_ID_AMD_VIPER_740B:
+ r->name = "AMD756";
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7413:
+ r->name = "AMD766";
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7443:
+ r->name = "AMD768";
+ break;
+ default:
+ return 0;
}
r->get = pirq_amd756_get;
r->set = pirq_amd756_set;
return 1;
}
-
+
static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
switch (device) {
* FIXME: should we have an option to say "generic for
* chipset" ?
*/
-
+
static void __init pirq_find_router(struct irq_router *r)
{
struct irq_routing_table *rt = pirq_table;
r->name = "default";
r->get = NULL;
r->set = NULL;
-
+
DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
rt->rtr_vendor, rt->rtr_device);
return;
}
- for( h = pirq_routers; h->vendor; h++) {
+ for (h = pirq_routers; h->vendor; h++) {
/* First look for a router match */
if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
break;
if (!pirq_table)
return 0;
-
+
DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
info = pirq_get_info(dev);
if (!info) {
*/
newirq = dev->irq;
if (newirq && !((1 << newirq) & mask)) {
- if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
- else printk("\n" KERN_WARNING
+ if (pci_probe & PCI_USE_PIRQ_MASK)
+ newirq = 0;
+ else
+ printk("\n" KERN_WARNING
"PCI: IRQ %i for device %s doesn't match PIRQ mask "
"- try pci=usepirqmask\n" KERN_DEBUG, newirq,
pci_name(dev));
irq = pirq & 0xf;
DBG(" -> hardcoded IRQ %d\n", irq);
msg = "Hardcoded";
- } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
- ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
+ } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
+ ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
DBG(" -> got IRQ %d\n", irq);
msg = "Found";
eisa_set_level_irq(irq);
continue;
if (info->irq[pin].link == pirq) {
/* We refuse to override the dev->irq information. Give a warning! */
- if ( dev2->irq && dev2->irq != irq && \
+ if (dev2->irq && dev2->irq != irq && \
(!(pci_probe & PCI_USE_PIRQ_MASK) || \
- ((1 << dev2->irq) & mask)) ) {
+ ((1 << dev2->irq) & mask))) {
#ifndef CONFIG_PCI_MSI
- printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
+ printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
pci_name(dev2), dev2->irq, irq);
#endif
- continue;
- }
+ continue;
+ }
dev2->irq = irq;
pirq_penalty[irq]++;
if (dev != dev2)
/*
* Recalculate IRQ numbers if we use the I/O APIC.
*/
- if (io_apic_assign_pci_irqs)
- {
+ if (io_apic_assign_pci_irqs) {
int irq;
if (pin) {
* busses itself so we should get into this branch reliably.
*/
if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
- struct pci_dev * bridge = dev->bus->self;
+ struct pci_dev *bridge = dev->bus->self;
pin = (pin + PCI_SLOT(dev->devfn)) % 4;
- irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
{ }
};
-static int __init pcibios_irq_init(void)
+int __init pcibios_irq_init(void)
{
DBG(KERN_DEBUG "PCI: IRQ init\n");
pirq_find_router(&pirq_router);
if (pirq_table->exclusive_irqs) {
int i;
- for (i=0; i<16; i++)
+ for (i = 0; i < 16; i++)
if (!(pirq_table->exclusive_irqs & (1 << i)))
pirq_penalty[i] += 100;
}
return 0;
}
-subsys_initcall(pcibios_irq_init);
-
-
static void pirq_penalize_isa_irq(int irq, int active)
{
/*
*/
temp_dev = dev;
while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
- struct pci_dev * bridge = dev->bus->self;
+ struct pci_dev *bridge = dev->bus->self;
pin = (pin + PCI_SLOT(dev->devfn)) % 4;
- irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
git.openpandora.org / pandora-kernel.git / blobdiff