static DEFINE_SPINLOCK(ioapic_lock);
static DEFINE_SPINLOCK(vector_lock);
-static bool mask_ioapic_irq_2 __initdata;
-
-void __init force_mask_ioapic_irq_2(void)
-{
- mask_ioapic_irq_2 = true;
-}
-
int timer_through_8259 __initdata;
/*
/*
* Send the IPI. The write to APIC_ICR fires this off.
*/
- apic_write_around(APIC_ICR, cfg);
+ apic_write(APIC_ICR, cfg);
}
#endif /* !CONFIG_SMP */
void print_all_local_APICs(void)
{
- on_each_cpu(print_local_APIC, NULL, 1, 1);
+ on_each_cpu(print_local_APIC, NULL, 1);
}
void /*__init*/ print_PIC(void)
unsigned long v;
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
}
static void unmask_lapic_irq(unsigned int irq)
unsigned long v;
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
}
static struct irq_chip lapic_chip __read_mostly = {
* The AEOI mode will finish them in the 8259A
* automatically.
*/
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
- printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
- vector, apic1, pin1, apic2, pin2);
-
- if (mask_ioapic_irq_2)
- mask_IO_APIC_irq(2);
+ apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+ "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+ vector, apic1, pin1, apic2, pin2);
/*
* Some BIOS writers are clueless and report the ExtINTA
}
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
- printk(KERN_ERR "..MP-BIOS bug: "
- "8254 timer not connected to IO-APIC\n");
+ apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+ "8254 timer not connected to IO-APIC\n");
- printk(KERN_INFO "...trying to set up timer (IRQ0) "
- "through the 8259A ... ");
- printk("\n..... (found pin %d) ...", pin2);
+ apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+ "(IRQ0) through the 8259A ...\n");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "..... (found apic %d pin %d) ...\n", apic2, pin2);
/*
* legacy devices should be connected to IO APIC #0
*/
unmask_IO_APIC_irq(0);
enable_8259A_irq(0);
if (timer_irq_works()) {
- printk("works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
timer_through_8259 = 1;
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
*/
disable_8259A_irq(0);
clear_IO_APIC_pin(apic2, pin2);
- printk(" failed.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
}
if (nmi_watchdog == NMI_IO_APIC) {
- printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+ apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+ "through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = NMI_NONE;
}
timer_ack = 0;
- printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "...trying to set up timer as Virtual Wire IRQ...\n");
lapic_register_intr(0, vector);
- apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
+ apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
if (timer_irq_works()) {
- printk(" works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
goto out;
}
disable_8259A_irq(0);
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
- printk(" failed.\n");
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+ apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
- printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+ apic_printk(APIC_QUIET, KERN_INFO
+ "...trying to set up timer as ExtINT IRQ...\n");
init_8259A(0);
make_8259A_irq(0);
- apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_DM_EXTINT);
unlock_ExtINT_logic();
if (timer_irq_works()) {
- printk(" works.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
goto out;
}
- printk(" failed :(.\n");
+ apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
- "report. Then try booting with the 'noapic' option");
+ "report. Then try booting with the 'noapic' option.\n");
out:
local_irq_restore(flags);
}
/*
- *
- * IRQ's that are handled by the PIC in the MPS IOAPIC case.
- * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
- * Linux doesn't really care, as it's not actually used
- * for any interrupt handling anyway.
+ * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
+ * to devices. However there may be an I/O APIC pin available for
+ * this interrupt regardless. The pin may be left unconnected, but
+ * typically it will be reused as an ExtINT cascade interrupt for
+ * the master 8259A. In the MPS case such a pin will normally be
+ * reported as an ExtINT interrupt in the MP table. With ACPI
+ * there is no provision for ExtINT interrupts, and in the absence
+ * of an override it would be treated as an ordinary ISA I/O APIC
+ * interrupt, that is edge-triggered and unmasked by default. We
+ * used to do this, but it caused problems on some systems because
+ * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
+ * the same ExtINT cascade interrupt to drive the local APIC of the
+ * bootstrap processor. Therefore we refrain from routing IRQ2 to
+ * the I/O APIC in all cases now. No actual device should request
+ * it anyway. --macro
*/
#define PIC_IRQS (1 << PIC_CASCADE_IR)
enable_IO_APIC();
- if (acpi_ioapic)
- io_apic_irqs = ~0; /* all IRQs go through IOAPIC */
- else
- io_apic_irqs = ~PIC_IRQS;
+ io_apic_irqs = ~PIC_IRQS;
printk("ENABLING IO-APIC IRQs\n");