#endif
#ifdef CONFIG_PARAVIRT
-ENTRY(native_irq_enable_syscall_ret)
- movq %gs:pda_oldrsp,%rsp
+ENTRY(native_usergs_sysret64)
swapgs
sysretq
#endif /* CONFIG_PARAVIRT */
.macro FAKE_STACK_FRAME child_rip
/* push in order ss, rsp, eflags, cs, rip */
xorl %eax, %eax
- pushq %rax /* ss */
+ pushq $__KERNEL_DS /* ss */
CFI_ADJUST_CFA_OFFSET 8
/*CFI_REL_OFFSET ss,0*/
pushq %rax /* rsp */
CFI_ADJUST_CFA_OFFSET -4
call schedule_tail
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
jnz rff_trace
rff_action:
RESTORE_REST
testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread?
je int_ret_from_sys_call
- testl $_TIF_IA32,threadinfo_flags(%rcx)
+ testl $_TIF_IA32,TI_flags(%rcx)
jnz int_ret_from_sys_call
RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
jmp ret_from_sys_call
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%rcx)
jnz tracesys
cmpq $__NR_syscall_max,%rax
ja badsys
GET_THREAD_INFO(%rcx)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
jnz sysret_careful
CFI_REMEMBER_STATE
CFI_REGISTER rip,rcx
RESTORE_ARGS 0,-ARG_SKIP,1
/*CFI_REGISTER rflags,r11*/
- ENABLE_INTERRUPTS_SYSCALL_RET
+ movq %gs:pda_oldrsp, %rsp
+ USERGS_SYSRET64
CFI_RESTORE_STATE
/* Handle reschedules */
leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
xorl %esi,%esi # oldset -> arg2
call ptregscall_common
-1: movl $_TIF_NEED_RESCHED,%edi
+1: movl $_TIF_WORK_MASK,%edi
/* Use IRET because user could have changed frame. This
works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
DISABLE_INTERRUPTS(CLBR_NONE)
/* Do syscall tracing */
tracesys:
SAVE_REST
- movq $-ENOSYS,RAX(%rsp)
+ movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
FIXUP_TOP_OF_STACK %rdi
movq %rsp,%rdi
call syscall_trace_enter
LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
cmpq $__NR_syscall_max,%rax
- movq $-ENOSYS,%rcx
- cmova %rcx,%rax
- ja 1f
+ ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */
movq %r10,%rcx /* fixup for C */
call *sys_call_table(,%rax,8)
-1: movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX-ARGOFFSET(%rsp)
/* Use IRET because user could have changed frame */
/*
int_with_check:
LOCKDEP_SYS_EXIT_IRQ
GET_THREAD_INFO(%rcx)
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
jnz int_careful
- andl $~TS_COMPAT,threadinfo_status(%rcx)
+ andl $~TS_COMPAT,TI_status(%rcx)
jmp retint_swapgs
/* Either reschedule or signal or syscall exit tracking needed. */
movq %rsp,%rdi # &ptregs -> arg1
xorl %esi,%esi # oldset -> arg2
call do_notify_resume
-1: movl $_TIF_NEED_RESCHED,%edi
+1: movl $_TIF_WORK_MASK,%edi
int_restore_rest:
RESTORE_REST
DISABLE_INTERRUPTS(CLBR_NONE)
PTREGSCALL stub_clone, sys_clone, %r8
PTREGSCALL stub_fork, sys_fork, %rdi
PTREGSCALL stub_vfork, sys_vfork, %rdi
- PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx
PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
PTREGSCALL stub_iopl, sys_iopl, %rsi
movl $_TIF_WORK_MASK,%edi
retint_check:
LOCKDEP_SYS_EXIT_IRQ
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
CFI_REMEMBER_STATE
jnz retint_careful
RESTORE_REST
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl $_TIF_NEED_RESCHED,%edi
GET_THREAD_INFO(%rcx)
- jmp retint_check
+ jmp retint_with_reschedule
#ifdef CONFIG_PREEMPT
/* Returning to kernel space. Check if we need preemption */
/* rcx: threadinfo. interrupts off. */
ENTRY(retint_kernel)
- cmpl $0,threadinfo_preempt_count(%rcx)
+ cmpl $0,TI_preempt_count(%rcx)
jnz retint_restore_args
- bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
+ bt $TIF_NEED_RESCHED,TI_flags(%rcx)
jnc retint_restore_args
bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
jnc retint_restore_args
apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
END(apic_timer_interrupt)
+ENTRY(uv_bau_message_intr1)
+ apicinterrupt 220,uv_bau_message_interrupt
+END(uv_bau_message_intr1)
+
ENTRY(error_interrupt)
apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
END(error_interrupt)
*/
.macro zeroentry sym
INTR_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq $0 /* push error code/oldrax */
CFI_ADJUST_CFA_OFFSET 8
pushq %rax /* push real oldrax to the rdi slot */
.macro errorentry sym
XCPT_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq %rax
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rax,0
jmp irq_return
paranoid_userspace\trace:
GET_THREAD_INFO(%rcx)
- movl threadinfo_flags(%rcx),%ebx
+ movl TI_flags(%rcx),%ebx
andl $_TIF_WORK_MASK,%ebx
jz paranoid_swapgs\trace
movq %rsp,%rdi /* &pt_regs */
testl %eax,%eax
jne retint_kernel
LOCKDEP_SYS_EXIT_IRQ
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
movl $_TIF_WORK_MASK,%edi
andl %edi,%edx
jnz retint_careful
iret run with kernel gs again, so don't set the user space flag.
B stepping K8s sometimes report an truncated RIP for IRET
exceptions returning to compat mode. Check for these here too. */
- leaq irq_return(%rip),%rbp
- cmpq %rbp,RIP(%rsp)
+ leaq irq_return(%rip),%rcx
+ cmpq %rcx,RIP(%rsp)
je error_swapgs
- movl %ebp,%ebp /* zero extend */
- cmpq %rbp,RIP(%rsp)
+ movl %ecx,%ecx /* zero extend */
+ cmpq %rcx,RIP(%rsp)
je error_swapgs
cmpq $gs_change,RIP(%rsp)
je error_swapgs
/* Reload gs selector with exception handling */
/* edi: new selector */
-ENTRY(load_gs_index)
+ENTRY(native_load_gs_index)
CFI_STARTPROC
pushf
CFI_ADJUST_CFA_OFFSET 8
CFI_ADJUST_CFA_OFFSET -8
ret
CFI_ENDPROC
-ENDPROC(load_gs_index)
+ENDPROC(native_load_gs_index)
.section __ex_table,"a"
.align 8
zeroentry do_coprocessor_segment_overrun
END(coprocessor_segment_overrun)
-ENTRY(reserved)
- zeroentry do_reserved
-END(reserved)
-
/* runs on exception stack */
ENTRY(double_fault)
XCPT_FRAME
git.openpandora.org / pandora-kernel.git / blobdiff