#include <asm/apic.h>
#define __apicdebuginit(type) static type __init
+#define for_each_irq_pin(entry, head) \
+ for (entry = head; entry; entry = entry->next)
/*
* Is the SiS APIC rmw bug present ?
struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
+/* IO APIC gsi routing info */
+struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS];
+
/* MP IRQ source entries */
struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
}
early_param("noapic", parse_noapic);
-struct irq_pin_list;
-
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
struct irq_pin_list {
int apic, pin;
struct irq_pin_list *next;
return pin;
}
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * Most irqs are mapped 1:1 with pins.
+ */
struct irq_cfg {
struct irq_pin_list *irq_2_pin;
cpumask_var_t domain;
unsigned long flags;
spin_lock_irqsave(&ioapic_lock, flags);
- entry = cfg->irq_2_pin;
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
int pin;
- if (!entry)
- break;
pin = entry->pin;
reg = io_apic_read(entry->apic, 0x10 + pin*2);
/* Is the remote IRR bit set? */
spin_unlock_irqrestore(&ioapic_lock, flags);
return true;
}
- if (!entry->next)
- break;
- entry = entry->next;
}
spin_unlock_irqrestore(&ioapic_lock, flags);
* shared ISA-space IRQs, so we have to support them. We are super
* fast in the common case, and fast for shared ISA-space IRQs.
*/
-static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static int
+add_pin_to_irq_node_nopanic(struct irq_cfg *cfg, int node, int apic, int pin)
{
- struct irq_pin_list *entry;
+ struct irq_pin_list **last, *entry;
- entry = cfg->irq_2_pin;
- if (!entry) {
- entry = get_one_free_irq_2_pin(node);
- if (!entry) {
- printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
- apic, pin);
- return;
- }
- cfg->irq_2_pin = entry;
- entry->apic = apic;
- entry->pin = pin;
- return;
- }
-
- while (entry->next) {
- /* not again, please */
+ /* don't allow duplicates */
+ last = &cfg->irq_2_pin;
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
if (entry->apic == apic && entry->pin == pin)
- return;
-
- entry = entry->next;
+ return 0;
+ last = &entry->next;
}
- entry->next = get_one_free_irq_2_pin(node);
- entry = entry->next;
+ entry = get_one_free_irq_2_pin(node);
+ if (!entry) {
+ printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
+ node, apic, pin);
+ return -ENOMEM;
+ }
entry->apic = apic;
entry->pin = pin;
+
+ *last = entry;
+ return 0;
+}
+
+static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+{
+ if (add_pin_to_irq_node_nopanic(cfg, node, apic, pin))
+ panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
}
/*
* Reroute an IRQ to a different pin.
*/
static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
- int oldapic, int oldpin,
- int newapic, int newpin)
+ int oldapic, int oldpin,
+ int newapic, int newpin)
{
- struct irq_pin_list *entry = cfg->irq_2_pin;
- int replaced = 0;
+ struct irq_pin_list *entry;
- while (entry) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
if (entry->apic == oldapic && entry->pin == oldpin) {
entry->apic = newapic;
entry->pin = newpin;
- replaced = 1;
/* every one is different, right? */
- break;
+ return;
}
- entry = entry->next;
}
- /* why? call replace before add? */
- if (!replaced)
- add_pin_to_irq_node(cfg, node, newapic, newpin);
+ /* old apic/pin didn't exist, so just add new ones */
+ add_pin_to_irq_node(cfg, node, newapic, newpin);
}
-static inline void io_apic_modify_irq(struct irq_cfg *cfg,
- int mask_and, int mask_or,
- void (*final)(struct irq_pin_list *entry))
+static void io_apic_modify_irq(struct irq_cfg *cfg,
+ int mask_and, int mask_or,
+ void (*final)(struct irq_pin_list *entry))
{
int pin;
struct irq_pin_list *entry;
- for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
pin = entry->pin;
reg = io_apic_read(entry->apic, 0x10 + pin * 2);
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
}
-#ifdef CONFIG_X86_64
static void io_apic_sync(struct irq_pin_list *entry)
{
/*
{
io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
}
-#else /* CONFIG_X86_32 */
-static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
-{
- io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
-}
static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
{
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
}
-#endif /* CONFIG_X86_32 */
static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
{
if (!entry)
continue;
printk(KERN_DEBUG "IRQ%d ", irq);
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin)
printk("-> %d:%d", entry->apic, entry->pin);
- if (!entry->next)
- break;
- entry = entry->next;
- }
printk("\n");
}
return was_pending;
}
-#ifdef CONFIG_X86_64
static int ioapic_retrigger_irq(unsigned int irq)
{
return 1;
}
-#else
-static int ioapic_retrigger_irq(unsigned int irq)
-{
- apic->send_IPI_self(irq_cfg(irq)->vector);
-
- return 1;
-}
-#endif
/*
* Level and edge triggered IO-APIC interrupts need different handling,
struct irq_pin_list *entry;
u8 vector = cfg->vector;
- entry = cfg->irq_2_pin;
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
- if (!entry)
- break;
-
apic = entry->apic;
pin = entry->pin;
/*
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
io_apic_modify(apic, 0x10 + pin*2, reg);
- if (!entry->next)
- break;
- entry = entry->next;
}
}
static void ack_apic_level(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
-
-#ifdef CONFIG_X86_32
unsigned long v;
int i;
-#endif
struct irq_cfg *cfg;
int do_unmask_irq = 0;
}
#endif
-#ifdef CONFIG_X86_32
/*
- * It appears there is an erratum which affects at least version 0x11
- * of I/O APIC (that's the 82093AA and cores integrated into various
- * chipsets). Under certain conditions a level-triggered interrupt is
- * erroneously delivered as edge-triggered one but the respective IRR
- * bit gets set nevertheless. As a result the I/O unit expects an EOI
- * message but it will never arrive and further interrupts are blocked
- * from the source. The exact reason is so far unknown, but the
- * phenomenon was observed when two consecutive interrupt requests
- * from a given source get delivered to the same CPU and the source is
- * temporarily disabled in between.
- *
- * A workaround is to simulate an EOI message manually. We achieve it
- * by setting the trigger mode to edge and then to level when the edge
- * trigger mode gets detected in the TMR of a local APIC for a
- * level-triggered interrupt. We mask the source for the time of the
- * operation to prevent an edge-triggered interrupt escaping meanwhile.
- * The idea is from Manfred Spraul. --macro
- */
+ * It appears there is an erratum which affects at least version 0x11
+ * of I/O APIC (that's the 82093AA and cores integrated into various
+ * chipsets). Under certain conditions a level-triggered interrupt is
+ * erroneously delivered as edge-triggered one but the respective IRR
+ * bit gets set nevertheless. As a result the I/O unit expects an EOI
+ * message but it will never arrive and further interrupts are blocked
+ * from the source. The exact reason is so far unknown, but the
+ * phenomenon was observed when two consecutive interrupt requests
+ * from a given source get delivered to the same CPU and the source is
+ * temporarily disabled in between.
+ *
+ * A workaround is to simulate an EOI message manually. We achieve it
+ * by setting the trigger mode to edge and then to level when the edge
+ * trigger mode gets detected in the TMR of a local APIC for a
+ * level-triggered interrupt. We mask the source for the time of the
+ * operation to prevent an edge-triggered interrupt escaping meanwhile.
+ * The idea is from Manfred Spraul. --macro
+ */
cfg = desc->chip_data;
i = cfg->vector;
-
v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-#endif
/*
* We must acknowledge the irq before we move it or the acknowledge will
unmask_IO_APIC_irq_desc(desc);
}
-#ifdef CONFIG_X86_32
+ /* Tail end of version 0x11 I/O APIC bug workaround */
if (!(v & (1 << (i & 0x1f)))) {
atomic_inc(&irq_mis_count);
spin_lock(&ioapic_lock);
__unmask_and_level_IO_APIC_irq(cfg);
spin_unlock(&ioapic_lock);
}
-#endif
}
#ifdef CONFIG_INTR_REMAP
static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
{
- int apic, pin;
struct irq_pin_list *entry;
- entry = cfg->irq_2_pin;
- for (;;) {
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- io_apic_eoi(apic, pin);
- entry = entry->next;
- }
+ for_each_irq_pin(entry, cfg->irq_2_pin)
+ io_apic_eoi(entry->apic, entry->pin);
}
static void
cfg = desc->chip_data;
dynamic_irq_cleanup(irq);
/* connect back irq_cfg */
- if (desc)
- desc->chip_data = cfg;
+ desc->chip_data = cfg;
free_irte(irq);
spin_lock_irqsave(&vector_lock, flags);
*/
if (irq >= NR_IRQS_LEGACY) {
cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, ioapic, pin);
+ if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) {
+ printk(KERN_INFO "can not add pin %d for irq %d\n",
+ pin, irq);
+ return 0;
+ }
}
setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
return __io_apic_set_pci_routing(dev, irq, irq_attr);
}
-/* --------------------------------------------------------------------------
- ACPI-based IOAPIC Configuration
- -------------------------------------------------------------------------- */
+u8 __init io_apic_unique_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ return io_apic_get_unique_id(nr_ioapics, id);
+ else
+ return id;
+#else
+ int i;
+ DECLARE_BITMAP(used, 256);
-#ifdef CONFIG_ACPI
+ bitmap_zero(used, 256);
+ for (i = 0; i < nr_ioapics; i++) {
+ struct mpc_ioapic *ia = &mp_ioapics[i];
+ __set_bit(ia->apicid, used);
+ }
+ if (!test_bit(id, used))
+ return id;
+ return find_first_zero_bit(used, 256);
+#endif
+}
#ifdef CONFIG_X86_32
int __init io_apic_get_unique_id(int ioapic, int apic_id)
return 0;
}
-#endif /* CONFIG_ACPI */
-
/*
* This function currently is only a helper for the i386 smp boot process where
* we need to reprogram the ioredtbls to cater for the cpus which have come online
static struct resource *ioapic_resources;
-static struct resource * __init ioapic_setup_resources(void)
+static struct resource * __init ioapic_setup_resources(int nr_ioapics)
{
unsigned long n;
struct resource *res;
mem = alloc_bootmem(n);
res = (void *)mem;
- if (mem != NULL) {
- mem += sizeof(struct resource) * nr_ioapics;
+ mem += sizeof(struct resource) * nr_ioapics;
- for (i = 0; i < nr_ioapics; i++) {
- res[i].name = mem;
- res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- sprintf(mem, "IOAPIC %u", i);
- mem += IOAPIC_RESOURCE_NAME_SIZE;
- }
+ for (i = 0; i < nr_ioapics; i++) {
+ res[i].name = mem;
+ res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ sprintf(mem, "IOAPIC %u", i);
+ mem += IOAPIC_RESOURCE_NAME_SIZE;
}
ioapic_resources = res;
struct resource *ioapic_res;
int i;
- ioapic_res = ioapic_setup_resources();
+ ioapic_res = ioapic_setup_resources(nr_ioapics);
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
ioapic_phys = mp_ioapics[i].apicaddr;
__fix_to_virt(idx), ioapic_phys);
idx++;
- if (ioapic_res != NULL) {
- ioapic_res->start = ioapic_phys;
- ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
- ioapic_res++;
- }
+ ioapic_res->start = ioapic_phys;
+ ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+ ioapic_res++;
}
}
r++;
}
}
+
+int mp_find_ioapic(int gsi)
+{
+ int i = 0;
+
+ /* Find the IOAPIC that manages this GSI. */
+ for (i = 0; i < nr_ioapics; i++) {
+ if ((gsi >= mp_gsi_routing[i].gsi_base)
+ && (gsi <= mp_gsi_routing[i].gsi_end))
+ return i;
+ }
+
+ printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+ return -1;
+}
+
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+ if (WARN_ON(ioapic == -1))
+ return -1;
+ if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end))
+ return -1;
+
+ return gsi - mp_gsi_routing[ioapic].gsi_base;
+}
+
+static int bad_ioapic(unsigned long address)
+{
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+ "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+ return 1;
+ }
+ if (!address) {
+ printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
+ " found in table, skipping!\n");
+ return 1;
+ }
+ return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+ int idx = 0;
+
+ if (bad_ioapic(address))
+ return;
+
+ idx = nr_ioapics;
+
+ mp_ioapics[idx].type = MP_IOAPIC;
+ mp_ioapics[idx].flags = MPC_APIC_USABLE;
+ mp_ioapics[idx].apicaddr = address;
+
+ set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+ mp_ioapics[idx].apicid = io_apic_unique_id(id);
+ mp_ioapics[idx].apicver = io_apic_get_version(idx);
+
+ /*
+ * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+ * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+ */
+ mp_gsi_routing[idx].gsi_base = gsi_base;
+ mp_gsi_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
+
+ printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+ "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+ mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
+ mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end);
+
+ nr_ioapics++;
+}
git.openpandora.org / pandora-kernel.git / blobdiff