return static_cpu_has(X86_FEATURE_XSAVE);
}
+static __always_inline __pure bool use_fxsr(void)
+{
+ return static_cpu_has(X86_FEATURE_FXSR);
+}
+
extern void __sanitize_i387_state(struct task_struct *);
static inline void sanitize_i387_state(struct task_struct *tsk)
return err;
}
-/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. The kernel data segment can be sometimes 0 and sometimes
- new user value. Both should be ok.
- Use the PDA as safe address because it should be already in L1. */
-static inline void fpu_clear(struct fpu *fpu)
-{
- struct xsave_struct *xstate = &fpu->state->xsave;
- struct i387_fxsave_struct *fx = &fpu->state->fxsave;
-
- /*
- * xsave header may indicate the init state of the FP.
- */
- if (use_xsave() &&
- !(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
- return;
-
- if (unlikely(fx->swd & X87_FSW_ES))
- asm volatile("fnclex");
- alternative_input(ASM_NOP8 ASM_NOP2,
- " emms\n" /* clear stack tags */
- " fildl %%gs:0", /* load to clear state */
- X86_FEATURE_FXSAVE_LEAK);
-}
-
-static inline void clear_fpu_state(struct task_struct *tsk)
-{
- fpu_clear(&tsk->thread.fpu);
-}
-
static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
{
int err;
/* Using "rex64; fxsave %0" is broken because, if the memory operand
uses any extended registers for addressing, a second REX prefix
will be generated (to the assembler, rex64 followed by semicolon
- is a separate instruction), and hence the 64-bitness is lost.
- Using "fxsaveq %0" would be the ideal choice, but is only supported
- starting with gas 2.16.
- asm volatile("fxsaveq %0"
- : "=m" (fpu->state->fxsave));
- Using, as a workaround, the properly prefixed form below isn't
+ is a separate instruction), and hence the 64-bitness is lost. */
+
+#ifdef CONFIG_AS_FXSAVEQ
+ /* Using "fxsaveq %0" would be the ideal choice, but is only supported
+ starting with gas 2.16. */
+ __asm__ __volatile__("fxsaveq %0"
+ : "=m" (fpu->state->fxsave));
+#else
+ /* Using, as a workaround, the properly prefixed form below isn't
accepted by any binutils version so far released, complaining that
the same type of prefix is used twice if an extended register is
needed for addressing (fix submitted to mainline 2005-11-21).
asm volatile("rex64/fxsave (%[fx])"
: "=m" (fpu->state->fxsave)
: [fx] "R" (&fpu->state->fxsave));
-}
-
-static inline void fpu_save_init(struct fpu *fpu)
-{
- if (use_xsave())
- fpu_xsave(fpu);
- else
- fpu_fxsave(fpu);
-
- fpu_clear(fpu);
+#endif
}
#else /* CONFIG_X86_32 */
return 0;
}
+static inline void fpu_fxsave(struct fpu *fpu)
+{
+ asm volatile("fxsave %[fx]"
+ : [fx] "=m" (fpu->state->fxsave));
+}
+
+#endif /* CONFIG_X86_64 */
+
/* We need a safe address that is cheap to find and that is already
in L1 during context switch. The best choices are unfortunately
different for UP and SMP */
static inline void fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
- struct xsave_struct *xstate = &fpu->state->xsave;
- struct i387_fxsave_struct *fx = &fpu->state->fxsave;
-
fpu_xsave(fpu);
/*
* xsave header may indicate the init state of the FP.
*/
- if (!(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
- goto end;
-
- if (unlikely(fx->swd & X87_FSW_ES))
- asm volatile("fnclex");
-
- /*
- * we can do a simple return here or be paranoid :)
- */
- goto clear_state;
+ if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
+ return;
+ } else if (use_fxsr()) {
+ fpu_fxsave(fpu);
+ } else {
+ asm volatile("fsave %[fx]; fwait"
+ : [fx] "=m" (fpu->state->fsave));
+ return;
}
- /* Use more nops than strictly needed in case the compiler
- varies code */
- alternative_input(
- "fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
- "fxsave %[fx]\n"
- "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
- X86_FEATURE_FXSR,
- [fx] "m" (fpu->state->fxsave),
- [fsw] "m" (fpu->state->fxsave.swd) : "memory");
-clear_state:
+ if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
+ asm volatile("fnclex");
+
/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
is pending. Clear the x87 state here by setting it to fixed
values. safe_address is a random variable that should be in L1 */
alternative_input(
- GENERIC_NOP8 GENERIC_NOP2,
+ ASM_NOP8 ASM_NOP2,
"emms\n\t" /* clear stack tags */
- "fildl %[addr]", /* set F?P to defined value */
+ "fildl %P[addr]", /* set F?P to defined value */
X86_FEATURE_FXSAVE_LEAK,
[addr] "m" (safe_address));
-end:
- ;
}
-#endif /* CONFIG_X86_64 */
-
static inline void __save_init_fpu(struct task_struct *tsk)
{
fpu_save_init(&tsk->thread.fpu);
#endif /* __ASSEMBLY__ */
-#define PSHUFB_XMM5_XMM0 .byte 0x66, 0x0f, 0x38, 0x00, 0xc5
-#define PSHUFB_XMM5_XMM6 .byte 0x66, 0x0f, 0x38, 0x00, 0xf5
-
#endif /* _ASM_X86_I387_H */
git.openpandora.org / pandora-kernel.git / blobdiff