#include <linux/console.h>
#include <linux/tty.h>
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/io.h>
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
#include <linux/serial_core.h>
#include "../../../drivers/serial/sh-sci.h"
-#ifdef CONFIG_CPU_SH4
-#define SCIF_REG 0xffe80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH72060)
-#define SCIF_REG 0xfffe9800
-#else
-#error "Undefined SCIF for this subtype"
-#endif
-
static struct uart_port scif_port = {
- .mapbase = SCIF_REG,
- .membase = (char __iomem *)SCIF_REG,
+ .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT,
+ .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
};
static void scif_sercon_putc(int c)
.index = -1,
};
-static void scif_sercon_init(int baud)
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+#define DEFAULT_BAUD 115200
+/*
+ * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
+ * devices that aren't using sh-ipl+g.
+ */
+static void scif_sercon_init(char *s)
{
- ctrl_outw(0, SCIF_REG + 8);
- ctrl_outw(0, SCIF_REG);
+ unsigned baud = DEFAULT_BAUD;
+ char *e;
+
+ if (*s == ',')
+ ++s;
+
+ if (*s) {
+ /* ignore ioport/device name */
+ s += strcspn(s, ",");
+ if (*s == ',')
+ s++;
+ }
+
+ if (*s) {
+ baud = simple_strtoul(s, &e, 0);
+ if (baud == 0 || s == e)
+ baud = DEFAULT_BAUD;
+ }
+
+ ctrl_outw(0, scif_port.mapbase + 8);
+ ctrl_outw(0, scif_port.mapbase);
/* Set baud rate */
ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
- (32 * baud) - 1, SCIF_REG + 4);
-
- ctrl_outw(12, SCIF_REG + 24);
- ctrl_outw(8, SCIF_REG + 24);
- ctrl_outw(0, SCIF_REG + 32);
- ctrl_outw(0x60, SCIF_REG + 16);
- ctrl_outw(0, SCIF_REG + 36);
- ctrl_outw(0x30, SCIF_REG + 8);
+ (32 * baud) - 1, scif_port.mapbase + 4);
+
+ ctrl_outw(12, scif_port.mapbase + 24);
+ ctrl_outw(8, scif_port.mapbase + 24);
+ ctrl_outw(0, scif_port.mapbase + 32);
+ ctrl_outw(0x60, scif_port.mapbase + 16);
+ ctrl_outw(0, scif_port.mapbase + 36);
+ ctrl_outw(0x30, scif_port.mapbase + 8);
}
-#endif
+#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */
+#endif /* CONFIG_EARLY_SCIF_CONSOLE */
/*
* Setup a default console, if more than one is compiled in, rely on the
;
static int __initdata keep_early;
+static int early_console_initialized;
-int __init setup_early_printk(char *opt)
+int __init setup_early_printk(char *buf)
{
- char *space;
- char buf[256];
+ if (!buf)
+ return 0;
- strlcpy(buf, opt, sizeof(buf));
- space = strchr(buf, ' ');
- if (space)
- *space = 0;
+ if (early_console_initialized)
+ return 0;
+ early_console_initialized = 1;
if (strstr(buf, "keep"))
keep_early = 1;
if (!strncmp(buf, "serial", 6)) {
early_console = &scif_console;
-#ifdef CONFIG_CPU_SH4
- scif_sercon_init(115200);
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+ scif_sercon_init(buf + 6);
#endif
}
#endif
if (likely(early_console))
register_console(early_console);
- return 1;
+ return 0;
}
-__setup("earlyprintk=", setup_early_printk);
+early_param("earlyprintk", setup_early_printk);
void __init disable_early_printk(void)
{
+ if (!early_console_initialized || !early_console)
+ return;
if (!keep_early) {
printk("disabling early console\n");
unregister_console(early_console);