Merge branch 'intx' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6
[pandora-kernel.git] / arch / sh / kernel / early_printk.c
index a000227..6034082 100644 (file)
@@ -12,7 +12,7 @@
 #include <linux/console.h>
 #include <linux/tty.h>
 #include <linux/init.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
@@ -62,17 +62,9 @@ static struct console bios_console = {
 #include <linux/serial_core.h>
 #include "../../../drivers/serial/sh-sci.h"
 
-#ifdef CONFIG_CPU_SH4
-#define SCIF_REG       0xffe80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH72060)
-#define SCIF_REG       0xfffe9800
-#else
-#error "Undefined SCIF for this subtype"
-#endif
-
 static struct uart_port scif_port = {
-       .mapbase        = SCIF_REG,
-       .membase        = (char __iomem *)SCIF_REG,
+       .mapbase        = CONFIG_EARLY_SCIF_CONSOLE_PORT,
+       .membase        = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
 };
 
 static void scif_sercon_putc(int c)
@@ -113,23 +105,29 @@ static struct console scif_console = {
        .index          = -1,
 };
 
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+/*
+ * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
+ * devices that aren't using sh-ipl+g.
+ */
 static void scif_sercon_init(int baud)
 {
-       ctrl_outw(0, SCIF_REG + 8);
-       ctrl_outw(0, SCIF_REG);
+       ctrl_outw(0, scif_port.mapbase + 8);
+       ctrl_outw(0, scif_port.mapbase);
 
        /* Set baud rate */
        ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
-                 (32 * baud) - 1, SCIF_REG + 4);
-
-       ctrl_outw(12, SCIF_REG + 24);
-       ctrl_outw(8, SCIF_REG + 24);
-       ctrl_outw(0, SCIF_REG + 32);
-       ctrl_outw(0x60, SCIF_REG + 16);
-       ctrl_outw(0, SCIF_REG + 36);
-       ctrl_outw(0x30, SCIF_REG + 8);
+                 (32 * baud) - 1, scif_port.mapbase + 4);
+
+       ctrl_outw(12, scif_port.mapbase + 24);
+       ctrl_outw(8, scif_port.mapbase + 24);
+       ctrl_outw(0, scif_port.mapbase + 32);
+       ctrl_outw(0x60, scif_port.mapbase + 16);
+       ctrl_outw(0, scif_port.mapbase + 36);
+       ctrl_outw(0x30, scif_port.mapbase + 8);
 }
-#endif
+#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */
+#endif /* CONFIG_EARLY_SCIF_CONSOLE */
 
 /*
  * Setup a default console, if more than one is compiled in, rely on the
@@ -168,7 +166,7 @@ int __init setup_early_printk(char *opt)
        if (!strncmp(buf, "serial", 6)) {
                early_console = &scif_console;
 
-#ifdef CONFIG_CPU_SH4
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
                scif_sercon_init(115200);
 #endif
        }