Merge mulgrave-w:git/scsi-misc-2.6
[pandora-kernel.git] / arch / ppc / kernel / setup.c
index 53e9dea..5458ac5 100644 (file)
@@ -1,8 +1,7 @@
 /*
- * Common prep/chrp boot and setup code.
+ * Common prep boot and setup code.
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/sched.h>
@@ -12,7 +11,7 @@
 #include <linux/delay.h>
 #include <linux/initrd.h>
 #include <linux/ide.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
@@ -72,17 +71,12 @@ unsigned long ISA_DMA_THRESHOLD;
 unsigned int DMA_MODE_READ;
 unsigned int DMA_MODE_WRITE;
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-
+#ifdef CONFIG_PPC_PREP
 extern void prep_init(unsigned long r3, unsigned long r4,
                unsigned long r5, unsigned long r6, unsigned long r7);
-extern void chrp_init(unsigned long r3, unsigned long r4,
-               unsigned long r5, unsigned long r6, unsigned long r7);
 
 dev_t boot_dev;
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_PPC_PREP */
 
 int have_of;
 EXPORT_SYMBOL(have_of);
@@ -133,11 +127,8 @@ void machine_restart(char *cmd)
        ppc_md.restart(cmd);
 }
 
-void machine_power_off(void)
+static void ppc_generic_power_off(void)
 {
-#ifdef CONFIG_NVRAM
-       nvram_sync();
-#endif
        ppc_md.power_off();
 }
 
@@ -149,7 +140,17 @@ void machine_halt(void)
        ppc_md.halt();
 }
 
-void (*pm_power_off)(void) = machine_power_off;
+void (*pm_power_off)(void) = ppc_generic_power_off;
+
+void machine_power_off(void)
+{
+#ifdef CONFIG_NVRAM
+       nvram_sync();
+#endif
+       if (pm_power_off)
+               pm_power_off();
+       ppc_generic_power_off();
+}
 
 #ifdef CONFIG_TAU
 extern u32 cpu_temp(unsigned long cpu);
@@ -319,72 +320,12 @@ early_init(int r3, int r4, int r5)
        identify_cpu(offset, 0);
        do_cpu_ftr_fixups(offset);
 
-#if defined(CONFIG_PPC_OF)
-       reloc_got2(offset);
-
-       /*
-        * don't do anything on prep
-        * for now, don't use bootinfo because it breaks yaboot 0.5
-        * and assume that if we didn't find a magic number, we have OF
-        */
-       if (*(unsigned long *)(0) != 0xdeadc0de)
-               phys = prom_init(r3, r4, (prom_entry)r5);
-
-       reloc_got2(-offset);
-#endif
-
        return phys;
 }
 
-#ifdef CONFIG_PPC_OF
-/*
- * Assume here that all clock rates are the same in a
- * smp system.  -- Cort
- */
-int
-of_show_percpuinfo(struct seq_file *m, int i)
-{
-       struct device_node *cpu_node;
-       u32 *fp;
-       int s;
-       
-       cpu_node = find_type_devices("cpu");
-       if (!cpu_node)
-               return 0;
-       for (s = 0; s < i && cpu_node->next; s++)
-               cpu_node = cpu_node->next;
-       fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL);
-       if (fp)
-               seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000);
-       return 0;
-}
-
-void __init
-intuit_machine_type(void)
-{
-       char *model;
-       struct device_node *root;
-       
-       /* ask the OF info if we're a chrp or pmac */
-       root = find_path_device("/");
-       if (root != 0) {
-               /* assume pmac unless proven to be chrp -- Cort */
-               _machine = _MACH_Pmac;
-               model = get_property(root, "device_type", NULL);
-               if (model && !strncmp("chrp", model, 4))
-                       _machine = _MACH_chrp;
-               else {
-                       model = get_property(root, "model", NULL);
-                       if (model && !strncmp(model, "IBM", 3))
-                               _machine = _MACH_chrp;
-               }
-       }
-}
-#endif
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
 /*
- * The PPC_MULTIPLATFORM version of platform_init...
+ * The PPC_PREP version of platform_init...
  */
 void __init
 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
@@ -399,161 +340,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
        parse_bootinfo(find_bootinfo());
 
-       /* if we didn't get any bootinfo telling us what we are... */
-       if (_machine == 0) {
-               /* prep boot loader tells us if we're prep or not */
-               if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
-                       _machine = _MACH_prep;
-       }
-
-#ifdef CONFIG_PPC_PREP
-       /* not much more to do here, if prep */
-       if (_machine == _MACH_prep) {
-               prep_init(r3, r4, r5, r6, r7);
-               return;
-       }
-#endif
-
-#ifdef CONFIG_PPC_OF
-       have_of = 1;
-
-       /* prom_init has already been called from __start */
-       if (boot_infos)
-               relocate_nodes();
-
-       /* If we aren't PReP, we can find out if we're Pmac
-        * or CHRP with this. */
-       if (_machine == 0)
-               intuit_machine_type();
-
-       /* finish_device_tree may need _machine defined. */
-       finish_device_tree();
-
-       /*
-        * If we were booted via quik, r3 points to the physical
-        * address of the command-line parameters.
-        * If we were booted from an xcoff image (i.e. netbooted or
-        * booted from floppy), we get the command line from the
-        * bootargs property of the /chosen node.
-        * If an initial ramdisk is present, r3 and r4
-        * are used for initrd_start and initrd_size,
-        * otherwise they contain 0xdeadbeef.
-        */
-       if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) {
-               strlcpy(cmd_line, (char *)r3 + KERNELBASE,
-                       sizeof(cmd_line));
-       } else if (boot_infos != 0) {
-               /* booted by BootX - check for ramdisk */
-               if (boot_infos->kernelParamsOffset != 0)
-                       strlcpy(cmd_line, (char *) boot_infos
-                               + boot_infos->kernelParamsOffset,
-                               sizeof(cmd_line));
-#ifdef CONFIG_BLK_DEV_INITRD
-               if (boot_infos->ramDisk) {
-                       initrd_start = (unsigned long) boot_infos
-                               + boot_infos->ramDisk;
-                       initrd_end = initrd_start + boot_infos->ramDiskSize;
-                       initrd_below_start_ok = 1;
-               }
-#endif
-       } else {
-               struct device_node *chosen;
-               char *p;
-       
-#ifdef CONFIG_BLK_DEV_INITRD
-               if (r3 && r4 && r4 != 0xdeadbeef) {
-                       if (r3 < KERNELBASE)
-                               r3 += KERNELBASE;
-                       initrd_start = r3;
-                       initrd_end = r3 + r4;
-                       ROOT_DEV = Root_RAM0;
-                       initrd_below_start_ok = 1;
-               }
-#endif
-               chosen = find_devices("chosen");
-               if (chosen != NULL) {
-                       p = get_property(chosen, "bootargs", NULL);
-                       if (p && *p) {
-                               strlcpy(cmd_line, p, sizeof(cmd_line));
-                       }
-               }
-       }
-#ifdef CONFIG_ADB
-       if (strstr(cmd_line, "adb_sync")) {
-               extern int __adb_probe_sync;
-               __adb_probe_sync = 1;
-       }
-#endif /* CONFIG_ADB */
-
-       switch (_machine) {
-#ifdef CONFIG_PPC_CHRP
-       case _MACH_chrp:
-               chrp_init(r3, r4, r5, r6, r7);
-               break;
-#endif
-       }
-#endif /* CONFIG_PPC_OF */
-}
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-#ifdef CONFIG_PPC_OF
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-extern char *of_stdout_device;
-
-static int __init set_preferred_console(void)
-{
-       struct device_node *prom_stdout;
-       char *name;
-       int offset = 0;
-
-       if (of_stdout_device == NULL)
-               return -ENODEV;
-
-       /* The user has requested a console so this is already set up. */
-       if (strstr(saved_command_line, "console="))
-               return -EBUSY;
-
-       prom_stdout = find_path_device(of_stdout_device);
-       if (!prom_stdout)
-               return -ENODEV;
-
-       name = (char *)get_property(prom_stdout, "name", NULL);
-       if (!name)
-               return -ENODEV;
-
-       if (strcmp(name, "serial") == 0) {
-               int i;
-               u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
-               if (i > 8) {
-                       switch (reg[1]) {
-                               case 0x3f8:
-                                       offset = 0;
-                                       break;
-                               case 0x2f8:
-                                       offset = 1;
-                                       break;
-                               case 0x898:
-                                       offset = 2;
-                                       break;
-                               case 0x890:
-                                       offset = 3;
-                                       break;
-                               default:
-                                       /* We dont recognise the serial port */
-                                       return -ENODEV;
-                       }
-               }
-       } else if (strcmp(name, "ch-a") == 0)
-               offset = 0;
-       else if (strcmp(name, "ch-b") == 0)
-               offset = 1;
-       else
-               return -ENODEV;
-       return add_preferred_console("ttyS", offset, NULL);
+       prep_init(r3, r4, r5, r6, r7);
 }
-console_initcall(set_preferred_console);
-#endif /* CONFIG_SERIAL_CORE_CONSOLE */
-#endif /* CONFIG_PPC_OF */
+#endif /* CONFIG_PPC_PREP */
 
 struct bi_record *find_bootinfo(void)
 {
@@ -589,23 +378,6 @@ void parse_bootinfo(struct bi_record *rec)
                        initrd_end = data[0] + data[1] + KERNELBASE;
                        break;
 #endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_MULTIPLATFORM
-               case BI_MACHTYPE:
-                       /* Machine types changed with the merge. Since the
-                        * bootinfo are now deprecated, we can just hard code
-                        * the appropriate conversion here for when we are
-                        * called with yaboot which passes us a machine type
-                        * this way.
-                        */
-                       switch(data[0]) {
-                       case 1: _machine = _MACH_prep; break;
-                       case 2: _machine = _MACH_Pmac; break;
-                       case 4: _machine = _MACH_chrp; break;
-                       default:
-                               _machine = data[0];
-                       }
-                       break;
-#endif
                case BI_MEMSIZE:
                        boot_mem_size = data[0];
                        break;
@@ -631,9 +403,6 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #ifdef CONFIG_6xx
        ppc_md.power_save = ppc6xx_idle;
 #endif
-#ifdef CONFIG_POWER4
-       ppc_md.power_save = power4_idle;
-#endif
 
        platform_init(r3, r4, r5, r6, r7);
 
@@ -711,8 +480,8 @@ int __init ppc_init(void)
        if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
 
        /* register CPU devices */
-       for_each_cpu(i)
-               register_cpu(&cpu_devices[i], i, NULL);
+       for_each_possible_cpu(i)
+               register_cpu(&cpu_devices[i], i);
 
        /* call platform init */
        if (ppc_md.init != NULL) {
@@ -799,7 +568,4 @@ void __init setup_arch(char **cmdline_p)
        if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 
        paging_init();
-
-       /* this is for modules since _machine can be a define -- Cort */
-       ppc_md.ppc_machine = _machine;
 }