Pull sbs into release branch
[pandora-kernel.git] / arch / powerpc / sysdev / tsi108_pci.c
index 322f86e..90db8a7 100644 (file)
@@ -3,6 +3,8 @@
  *
  * 2004-2005 (c) Tundra Semiconductor Corp.
  * Author: Alex Bounine (alexandreb@tundra.com)
+ * Author: Roy Zang (tie-fei.zang@freescale.com)
+ *        Add pci interrupt router host
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -33,6 +35,7 @@
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
 #include <asm/tsi108.h>
+#include <asm/tsi108_pci.h>
 #include <asm/tsi108_irq.h>
 #include <asm/prom.h>
 
        ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
 
 u32 tsi108_pci_cfg_base;
+static u32 tsi108_pci_cfg_phys;
 u32 tsi108_csr_vir_base;
+static struct device_node *pci_irq_node;
+static struct irq_host *pci_irq_host;
 
 extern u32 get_vir_csrbase(void);
 extern u32 tsi108_read_reg(u32 reg_offset);
@@ -58,9 +64,10 @@ tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
                           int offset, int len, u32 val)
 {
        volatile unsigned char *cfg_addr;
+       struct pci_controller *hose = bus->sysdata;
 
        if (ppc_md.pci_exclude_device)
-               if (ppc_md.pci_exclude_device(bus->number, devfunc))
+               if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
                        return PCIBIOS_DEVICE_NOT_FOUND;
 
        cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
@@ -143,10 +150,11 @@ tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
                          int len, u32 * val)
 {
        volatile unsigned char *cfg_addr;
+       struct pci_controller *hose = bus->sysdata;
        u32 temp;
 
        if (ppc_md.pci_exclude_device)
-               if (ppc_md.pci_exclude_device(bus->number, devfn))
+               if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
                        return PCIBIOS_DEVICE_NOT_FOUND;
 
        cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
@@ -181,7 +189,7 @@ tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 
 void tsi108_clear_pci_cfg_error(void)
 {
-       tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS);
+       tsi108_clear_pci_error(tsi108_pci_cfg_phys);
 }
 
 static struct pci_ops tsi108_direct_pci_ops = {
@@ -189,17 +197,17 @@ static struct pci_ops tsi108_direct_pci_ops = {
        tsi108_direct_write_config
 };
 
-int __init tsi108_setup_pci(struct device_node *dev)
+int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
 {
        int len;
        struct pci_controller *hose;
        struct resource rsrc;
        const int *bus_range;
-       int primary = 0, has_address = 0;
+       int has_address = 0;
 
        /* PCI Config mapping */
-       tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS,
-                       TSI108_PCI_CFG_SIZE);
+       tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
+       tsi108_pci_cfg_phys = cfg_phys;
        DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
            tsi108_pci_cfg_base);
 
@@ -207,20 +215,18 @@ int __init tsi108_setup_pci(struct device_node *dev)
        has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
 
        /* Get bus range if any */
-       bus_range = get_property(dev, "bus-range", &len);
+       bus_range = of_get_property(dev, "bus-range", &len);
        if (bus_range == NULL || len < 2 * sizeof(int)) {
                printk(KERN_WARNING "Can't get bus-range for %s, assume"
                       " bus 0\n", dev->full_name);
        }
 
-       hose = pcibios_alloc_controller();
+       hose = pcibios_alloc_controller(dev);
 
        if (!hose) {
                printk("PCI Host bridge init failed\n");
                return -ENOMEM;
        }
-       hose->arch_data = dev;
-       hose->set_cfg_type = 1;
 
        hose->first_busno = bus_range ? bus_range[0] : 0;
        hose->last_busno = bus_range ? bus_range[1] : 0xff;
@@ -378,6 +384,38 @@ static struct irq_chip tsi108_pci_irq = {
        .unmask = tsi108_pci_irq_enable,
 };
 
+static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
+                           u32 *intspec, unsigned int intsize,
+                           irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+       *out_hwirq = intspec[0];
+       *out_flags = IRQ_TYPE_LEVEL_HIGH;
+       return 0;
+}
+
+static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
+                         irq_hw_number_t hw)
+{      unsigned int irq;
+       DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw);
+       if ((virq >= 1) && (virq <= 4)){
+               irq = virq + IRQ_PCI_INTAD_BASE - 1;
+               get_irq_desc(irq)->status |= IRQ_LEVEL;
+               set_irq_chip(irq, &tsi108_pci_irq);
+       }
+       return 0;
+}
+
+static int pci_irq_host_match(struct irq_host *h, struct device_node *node)
+{
+       return pci_irq_node == node;
+}
+
+static struct irq_host_ops pci_irq_host_ops = {
+       .match = pci_irq_host_match,
+       .map = pci_irq_host_map,
+       .xlate = pci_irq_host_xlate,
+};
+
 /*
  * Exported functions
  */
@@ -391,15 +429,15 @@ static struct irq_chip tsi108_pci_irq = {
  * to the MPIC.
  */
 
-void __init tsi108_pci_int_init(void)
+void __init tsi108_pci_int_init(struct device_node *node)
 {
-       u_int i;
-
        DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
-       for (i = 0; i < NUM_PCI_IRQS; i++) {
-               irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq;
-               irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
+       pci_irq_node = of_node_get(node);
+       pci_irq_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &pci_irq_host_ops, 0);
+       if (pci_irq_host == NULL) {
+               printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
+               return;
        }
 
        init_pci_source();