static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(ras_log_buf_lock);
-static char mce_data_buf[RTAS_ERROR_LOG_MAX];
+static char global_mce_data_buf[RTAS_ERROR_LOG_MAX];
+static DEFINE_PER_CPU(__u64, mce_data_buf);
static int ras_get_sensor_state_token;
static int ras_check_exception_token;
#define EPOW_SENSOR_TOKEN 9
#define EPOW_SENSOR_INDEX 0
-#define RAS_VECTOR_OFFSET 0x500
static irqreturn_t ras_epow_interrupt(int irq, void *dev_id);
static irqreturn_t ras_error_interrupt(int irq, void *dev_id);
spin_lock(&ras_log_buf_lock);
status = rtas_call(ras_check_exception_token, 6, 1, NULL,
- RAS_VECTOR_OFFSET,
+ RTAS_VECTOR_EXTERNAL_INTERRUPT,
irq_map[irq].hwirq,
RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS,
critical, __pa(&ras_log_buf),
spin_lock(&ras_log_buf_lock);
status = rtas_call(ras_check_exception_token, 6, 1, NULL,
- RAS_VECTOR_OFFSET,
+ RTAS_VECTOR_EXTERNAL_INTERRUPT,
irq_map[irq].hwirq,
RTAS_INTERNAL_ERROR, 1 /*Time Critical */,
__pa(&ras_log_buf),
return IRQ_HANDLED;
}
-/* Get the error information for errors coming through the
+/*
+ * Some versions of FWNMI place the buffer inside the 4kB page starting at
+ * 0x7000. Other versions place it inside the rtas buffer. We check both.
+ */
+#define VALID_FWNMI_BUFFER(A) \
+ ((((A) >= 0x7000) && ((A) < 0x7ff0)) || \
+ (((A) >= rtas.base) && ((A) < (rtas.base + rtas.size - 16))))
+
+/*
+ * Get the error information for errors coming through the
* FWNMI vectors. The pt_regs' r3 will be updated to reflect
* the actual r3 if possible, and a ptr to the error log entry
* will be returned if found.
*
- * The mce_data_buf does not have any locks or protection around it,
+ * If the RTAS error is not of the extended type, then we put it in a per
+ * cpu 64bit buffer. If it is the extended type we use global_mce_data_buf.
+ *
+ * The global_mce_data_buf does not have any locks or protection around it,
* if a second machine check comes in, or a system reset is done
* before we have logged the error, then we will get corruption in the
* error log. This is preferable over holding off on calling
*/
static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs)
{
- unsigned long errdata = regs->gpr[3];
- struct rtas_error_log *errhdr = NULL;
unsigned long *savep;
+ struct rtas_error_log *h, *errhdr = NULL;
+
+ if (!VALID_FWNMI_BUFFER(regs->gpr[3])) {
+ printk(KERN_ERR "FWNMI: corrupt r3\n");
+ return NULL;
+ }
- if ((errdata >= 0x7000 && errdata < 0x7fff0) ||
- (errdata >= rtas.base && errdata < rtas.base + rtas.size - 16)) {
- savep = __va(errdata);
- regs->gpr[3] = savep[0]; /* restore original r3 */
- memset(mce_data_buf, 0, RTAS_ERROR_LOG_MAX);
- memcpy(mce_data_buf, (char *)(savep + 1), RTAS_ERROR_LOG_MAX);
- errhdr = (struct rtas_error_log *)mce_data_buf;
+ savep = __va(regs->gpr[3]);
+ regs->gpr[3] = savep[0]; /* restore original r3 */
+
+ /* If it isn't an extended log we can use the per cpu 64bit buffer */
+ h = (struct rtas_error_log *)&savep[1];
+ if (!h->extended) {
+ memcpy(&__get_cpu_var(mce_data_buf), h, sizeof(__u64));
+ errhdr = (struct rtas_error_log *)&__get_cpu_var(mce_data_buf);
} else {
- printk("FWNMI: corrupt r3\n");
+ int len;
+
+ len = max_t(int, 8+h->extended_log_length, RTAS_ERROR_LOG_MAX);
+ memset(global_mce_data_buf, 0, RTAS_ERROR_LOG_MAX);
+ memcpy(global_mce_data_buf, h, len);
+ errhdr = (struct rtas_error_log *)global_mce_data_buf;
}
+
return errhdr;
}
{
int ret = rtas_call(rtas_token("ibm,nmi-interlock"), 0, 1, NULL);
if (ret != 0)
- printk("FWNMI: nmi-interlock failed: %d\n", ret);
+ printk(KERN_ERR "FWNMI: nmi-interlock failed: %d\n", ret);
}
int pSeries_system_reset_exception(struct pt_regs *regs)
* Return 1 if corrected (or delivered a signal).
* Return 0 if there is nothing we can do.
*/
-static int recover_mce(struct pt_regs *regs, struct rtas_error_log * err)
+static int recover_mce(struct pt_regs *regs, struct rtas_error_log *err)
{
- int nonfatal = 0;
+ int recovered = 0;
- if (err->disposition == RTAS_DISP_FULLY_RECOVERED) {
+ if (!(regs->msr & MSR_RI)) {
+ /* If MSR_RI isn't set, we cannot recover */
+ recovered = 0;
+
+ } else if (err->disposition == RTAS_DISP_FULLY_RECOVERED) {
/* Platform corrected itself */
- nonfatal = 1;
- } else if ((regs->msr & MSR_RI) &&
- user_mode(regs) &&
- err->severity == RTAS_SEVERITY_ERROR_SYNC &&
- err->disposition == RTAS_DISP_NOT_RECOVERED &&
- err->target == RTAS_TARGET_MEMORY &&
- err->type == RTAS_TYPE_ECC_UNCORR &&
- !(current->pid == 0 || is_global_init(current))) {
- /* Kill off a user process with an ECC error */
- printk(KERN_ERR "MCE: uncorrectable ecc error for pid %d\n",
- current->pid);
- /* XXX something better for ECC error? */
- _exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
- nonfatal = 1;
+ recovered = 1;
+
+ } else if (err->disposition == RTAS_DISP_LIMITED_RECOVERY) {
+ /* Platform corrected itself but could be degraded */
+ printk(KERN_ERR "MCE: limited recovery, system may "
+ "be degraded\n");
+ recovered = 1;
+
+ } else if (user_mode(regs) && !is_global_init(current) &&
+ err->severity == RTAS_SEVERITY_ERROR_SYNC) {
+
+ /*
+ * If we received a synchronous error when in userspace
+ * kill the task. Firmware may report details of the fail
+ * asynchronously, so we can't rely on the target and type
+ * fields being valid here.
+ */
+ printk(KERN_ERR "MCE: uncorrectable error, killing task "
+ "%s:%d\n", current->comm, current->pid);
+
+ _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip);
+ recovered = 1;
}
- log_error((char *)err, ERR_TYPE_RTAS_LOG, !nonfatal);
+ log_error((char *)err, ERR_TYPE_RTAS_LOG, 0);
- return nonfatal;
+ return recovered;
}
/*
git.openpandora.org / pandora-kernel.git / blobdiff