* that is iMac G5 and latest single CPU desktop.
*/
+#undef DEBUG
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <asm/smu.h>
#include <asm/pmac_pfunc.h>
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG(fmt...)
-#endif
+#define DBG(fmt...) pr_debug(fmt)
/* see 970FX user manual */
/* Power mode data is an array of the 32 bits PCR values to use for
* the various frequencies, retrieved from the device-tree
*/
-static u32 *g5_pmode_data;
-static int g5_pmode_max;
static int g5_pmode_cur;
static void (*g5_switch_volt)(int speed_mode);
static DEFINE_MUTEX(g5_switch_mutex);
+#ifdef CONFIG_PMAC_SMU
+
+static const u32 *g5_pmode_data;
+static int g5_pmode_max;
+
static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */
static int g5_fvt_count; /* number of op. points */
static int g5_fvt_cur; /* current op. point */
return i;
}
+/*
+ * Fake voltage switching for platforms with missing support
+ */
+
+static void g5_dummy_switch_volt(int speed_mode)
+{
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
/*
* Platform function based voltage switching for PowerMac7,2 & 7,3
*/
struct pmf_args args;
u32 done = 0;
unsigned long timeout;
+ int rc;
+
+ DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
/* If frequency is going up, first ramp up the voltage */
if (speed_mode < g5_pmode_cur)
/* Do it */
if (speed_mode == CPUFREQ_HIGH)
- pmf_call_one(pfunc_cpu_setfreq_high, NULL);
+ rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
else
- pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+ rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+
+ if (rc)
+ printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
/* It's an irq GPIO so we should be able to just block here,
* I'll do that later after I've properly tested the IRQ code for
return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
}
-/*
- * Fake voltage switching for platforms with missing support
- */
-
-static void g5_dummy_switch_volt(int speed_mode)
-{
-}
/*
* Common interface to the cpufreq core
};
+#ifdef CONFIG_PMAC_SMU
+
static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
{
struct device_node *cpunode;
unsigned int psize, ssize;
unsigned long max_freq;
char *freq_method, *volt_method;
- u32 *valp, pvr_hi;
+ const u32 *valp;
+ u32 pvr_hi;
int use_volts_vdnap = 0;
int use_volts_smu = 0;
int rc = -ENODEV;
/* Get first CPU node */
for (cpunode = NULL;
(cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
- u32 *reg =
- (u32 *)get_property(cpunode, "reg", NULL);
+ const u32 *reg = get_property(cpunode, "reg", NULL);
if (reg == NULL || (*reg) != 0)
continue;
if (!strcmp(cpunode->type, "cpu"))
}
/* Check 970FX for now */
- valp = (u32 *)get_property(cpunode, "cpu-version", NULL);
+ valp = get_property(cpunode, "cpu-version", NULL);
if (!valp) {
DBG("No cpu-version property !\n");
goto bail_noprops;
}
/* Look for the powertune data in the device-tree */
- g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize);
+ g5_pmode_data = get_property(cpunode, "power-mode-data",&psize);
if (!g5_pmode_data) {
DBG("No power-mode-data !\n");
goto bail_noprops;
g5_pmode_max = psize / sizeof(u32) - 1;
if (use_volts_smu) {
- struct smu_sdbp_header *shdr;
+ const struct smu_sdbp_header *shdr;
/* Look for the FVT table */
shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
* half freq in this version. So far, I haven't yet seen a machine
* supporting anything else.
*/
- valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ valp = get_property(cpunode, "clock-frequency", NULL);
if (!valp)
return -ENODEV;
max_freq = (*valp)/1000;
return rc;
}
+#endif /* CONFIG_PMAC_SMU */
+
+
static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
{
struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
- u8 *eeprom = NULL;
- u32 *valp;
+ const u8 *eeprom = NULL;
+ const u32 *valp;
u64 max_freq, min_freq, ih, il;
int has_volt = 1, rc = 0;
+ DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
+ " RackMac3,1...\n");
+
/* Get first CPU node */
for (cpunode = NULL;
(cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
/* Lookup the cpuid eeprom node */
cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
if (cpuid != NULL)
- eeprom = (u8 *)get_property(cpuid, "cpuid", NULL);
+ eeprom = get_property(cpuid, "cpuid", NULL);
if (eeprom == NULL) {
printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
rc = -ENODEV;
/* Lookup the i2c hwclock */
for (hwclock = NULL;
(hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
- char *loc = get_property(hwclock, "hwctrl-location", NULL);
+ const char *loc = get_property(hwclock,
+ "hwctrl-location", NULL);
if (loc == NULL)
continue;
if (strcmp(loc, "CPU CLOCK"))
*/
/* Get max frequency from device-tree */
- valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ valp = get_property(cpunode, "clock-frequency", NULL);
if (!valp) {
printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
rc = -ENODEV;
*/
ih = *((u32 *)(eeprom + 0x10));
il = *((u32 *)(eeprom + 0x20));
+
+ /* Check for machines with no useful settings */
+ if (il == ih) {
+ printk(KERN_WARNING "cpufreq: No low frequency mode available"
+ " on this model !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
min_freq = 0;
if (ih != 0 && il != 0)
min_freq = (max_freq * il) / ih;
/* Sanity check */
if (min_freq >= max_freq || min_freq < 1000) {
printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
- rc = -ENODEV;
+ rc = -ENXIO;
goto bail;
}
g5_cpu_freqs[0].frequency = max_freq;
return rc;
}
-static int __init g5_rm31_cpufreq_init(struct device_node *cpus)
-{
- /* NYI */
- return 0;
-}
-
static int __init g5_cpufreq_init(void)
{
struct device_node *cpus;
- int rc;
+ int rc = 0;
cpus = of_find_node_by_path("/cpus");
if (cpus == NULL) {
}
if (machine_is_compatible("PowerMac7,2") ||
- machine_is_compatible("PowerMac7,3"))
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
rc = g5_pm72_cpufreq_init(cpus);
- else if (machine_is_compatible("RackMac3,1"))
- rc = g5_rm31_cpufreq_init(cpus);
+#ifdef CONFIG_PMAC_SMU
else
rc = g5_neo2_cpufreq_init(cpus);
+#endif /* CONFIG_PMAC_SMU */
of_node_put(cpus);
return rc;
git.openpandora.org / pandora-kernel.git / blobdiff