* 2 of the License, or (at your option) any later version.
*/
-#define DEBUG
+#undef DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/irq.h>
#include <asm/sections.h>
#include <asm/io.h>
#define DBG(x...)
#endif
-static struct pci_controller *u3_agp, *u3_ht;
+static struct pci_controller *u3_agp, *u3_ht, *u4_pcie;
static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
{
u3_ht_write_config
};
+static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off)
+{
+ return (1 << PCI_SLOT(devfn)) |
+ (PCI_FUNC(devfn) << 8) |
+ ((off >> 8) << 28) |
+ (off & 0xfcu);
+}
+
+static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn,
+ unsigned int off)
+{
+ return (bus << 16) |
+ (devfn << 8) |
+ ((off >> 8) << 28) |
+ (off & 0xfcu) | 1u;
+}
+
+static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, int offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno)
+ caddr = u4_pcie_cfa0(dev_fn, offset);
+ else
+ caddr = u4_pcie_cfa1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x03;
+ return hose->cfg_data + offset;
+}
+
+static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ (void) in_8(addr);
+ break;
+ case 2:
+ out_le16(addr, val);
+ (void) in_le16(addr);
+ break;
+ default:
+ out_le32(addr, val);
+ (void) in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u4_pcie_pci_ops =
+{
+ u4_pcie_read_config,
+ u4_pcie_write_config
+};
+
static void __init setup_u3_agp(struct pci_controller* hose)
{
/* On G5, we move AGP up to high bus number so we don't need
u3_agp = hose;
}
+static void __init setup_u4_pcie(struct pci_controller* hose)
+{
+ /* We currently only implement the "non-atomic" config space, to
+ * be optimised later.
+ */
+ hose->ops = &u4_pcie_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ /* The bus contains a bridge from root -> device, we need to
+ * make it visible on bus 0 so that we pick the right type
+ * of config cycles. If we didn't, we would have to force all
+ * config cycles to be type 1. So we override the "bus-range"
+ * property here
+ */
+ hose->first_busno = 0x00;
+ hose->last_busno = 0xff;
+ u4_pcie = hose;
+}
+
static void __init setup_u3_ht(struct pci_controller* hose)
{
hose->ops = &u3_ht_pci_ops;
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
+ } else if (device_is_compatible(dev, "u4-pcie")) {
+ setup_u4_pcie(hose);
+ disp_name = "U4-PCIE";
+ primary = 0;
}
printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
disp_name, hose->first_busno, hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, primary);
- pci_setup_phb_io(hose, primary);
/* Fixup "bus-range" OF property */
fixup_bus_range(dev);
}
-void __init maple_pcibios_fixup(void)
+void __devinit maple_pci_irq_fixup(struct pci_dev *dev)
{
- struct pci_dev *dev = NULL;
-
- DBG(" -> maple_pcibios_fixup\n");
+ DBG(" -> maple_pci_irq_fixup\n");
+
+ /* Fixup IRQ for PCIe host */
+ if (u4_pcie != NULL && dev->bus->number == 0 &&
+ pci_bus_to_host(dev->bus) == u4_pcie) {
+ printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n");
+ dev->irq = irq_create_mapping(NULL, 1);
+ if (dev->irq != NO_IRQ)
+ set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
+ }
- for_each_pci_dev(dev)
- pci_read_irq_line(dev);
+ /* Hide AMD8111 IDE interrupt when in legacy mode so
+ * the driver calls pci_get_legacy_ide_irq()
+ */
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_8111_IDE &&
+ (dev->class & 5) != 5) {
+ dev->irq = NO_IRQ;
+ }
- DBG(" <- maple_pcibios_fixup\n");
+ DBG(" <- maple_pci_irq_fixup\n");
}
static void __init maple_fixup_phb_resources(void)
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base;
+
hose->io_resource.start += offset;
hose->io_resource.end += offset;
+
printk(KERN_INFO "PCI Host %d, io start: %llx; io end: %llx\n",
hose->global_number,
(unsigned long long)hose->io_resource.start,
for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
if (np->name == NULL)
continue;
- if (strcmp(np->name, "pci") == 0) {
+ if (!strcmp(np->name, "pci") || !strcmp(np->name, "pcie")) {
if (add_bridge(np) == 0)
of_node_get(np);
}
if (ht && add_bridge(ht) != 0)
of_node_put(ht);
+ /*
+ * We need to call pci_setup_phb_io for the HT bridge first
+ * so it gets the I/O port numbers starting at 0, and we
+ * need to call it for the AGP bridge after that so it gets
+ * small positive I/O port numbers.
+ */
+ if (u3_ht)
+ pci_setup_phb_io(u3_ht, 1);
+ if (u3_agp)
+ pci_setup_phb_io(u3_agp, 0);
+ if (u4_pcie)
+ pci_setup_phb_io(u4_pcie, 0);
+
/* Fixup the IO resources on our host bridges as the common code
* does it only for childs of the host bridges
*/
return defirq;
np = pci_device_to_OF_node(pdev);
- if (np == NULL)
+ if (np == NULL) {
+ printk("Failed to locate OF node for IDE %s\n",
+ pci_name(pdev));
return defirq;
+ }
irq = irq_of_parse_and_map(np, channel & 0x1);
if (irq == NO_IRQ) {
printk("Failed to map onboard IDE interrupt for channel %d\n",
/* XXX: To remove once all firmwares are ok */
static void fixup_maple_ide(struct pci_dev* dev)
{
+ if (!machine_is(maple))
+ return;
+
#if 0 /* Enable this to enable IDE port 0 */
{
u8 v;
dev->resource[4].start = 0xcc00;
dev->resource[4].end = 0xcc10;
#endif
-#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
+#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
{
struct pci_dev *apicdev;
u32 v;
git.openpandora.org / pandora-kernel.git / blobdiff