Pull novell-bugzilla-156426 into release branch

[pandora-kernel.git] / arch / powerpc / platforms / chrp / time.c

diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 36a0f97..7d78890 100644 (file)
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -1,6 +1,4 @@
 /*
- *  arch/ppc/platforms/chrp_time.c
- *
  *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
  *
  * Adapted for PowerPC (PReP) by Gary Thomas
@@ -122,33 +120,15 @@ int chrp_set_rtc_time(struct rtc_time *tmarg)
 void chrp_get_rtc_time(struct rtc_time *tm)
 {
        unsigned int year, mon, day, hour, min, sec;
-       int uip, i;
-
-       /* The Linux interpretation of the CMOS clock register contents:
-        * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
-        * RTC registers show the second which has precisely just started.
-        * Let's hope other operating systems interpret the RTC the same way.
-        */
 
-       /* Since the UIP flag is set for about 2.2 ms and the clock
-        * is typically written with a precision of 1 jiffy, trying
-        * to obtain a precision better than a few milliseconds is
-        * an illusion. Only consistency is interesting, this also
-        * allows to use the routine for /dev/rtc without a potential
-        * 1 second kernel busy loop triggered by any reader of /dev/rtc.
-        */
-
-       for ( i = 0; i<1000000; i++) {
-               uip = chrp_cmos_clock_read(RTC_FREQ_SELECT);
+       do {
                sec = chrp_cmos_clock_read(RTC_SECONDS);
                min = chrp_cmos_clock_read(RTC_MINUTES);
                hour = chrp_cmos_clock_read(RTC_HOURS);
                day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH);
                mon = chrp_cmos_clock_read(RTC_MONTH);
                year = chrp_cmos_clock_read(RTC_YEAR);
-               uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT);
-               if ((uip & RTC_UIP)==0) break;
-       }
+       } while (sec != chrp_cmos_clock_read(RTC_SECONDS));
 
        if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
                BCD_TO_BIN(sec);
@@ -167,24 +147,3 @@ void chrp_get_rtc_time(struct rtc_time *tm)
        tm->tm_mon = mon;
        tm->tm_year = year;
 }
-
-
-void __init chrp_calibrate_decr(void)
-{
-       struct device_node *cpu;
-       unsigned int freq, *fp;
-
-       /*
-        * The cpu node should have a timebase-frequency property
-        * to tell us the rate at which the decrementer counts.
-        */
-       freq = 16666000;                /* hardcoded default */
-       cpu = find_type_devices("cpu");
-       if (cpu != 0) {
-               fp = (unsigned int *)
-                       get_property(cpu, "timebase-frequency", NULL);
-               if (fp != 0)
-                       freq = *fp;
-       }
-       ppc_tb_freq = freq;
-}