struct spider_pic *pic = spider_virq_to_pic(virq);
void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
- /* We use no locking as we should be covered by the descriptor lock
- * for access to invidual source configuration registers
- */
out_be32(cfg, in_be32(cfg) | 0x30000000u);
}
struct spider_pic *pic = spider_virq_to_pic(virq);
void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
- /* We use no locking as we should be covered by the descriptor lock
- * for access to invidual source configuration registers
- */
out_be32(cfg, in_be32(cfg) & ~0x30000000u);
}
out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf));
}
-static struct irq_chip spider_pic = {
- .typename = " SPIDER ",
- .unmask = spider_unmask_irq,
- .mask = spider_mask_irq,
- .ack = spider_ack_irq,
-};
-
-static int spider_host_match(struct irq_host *h, struct device_node *node)
-{
- struct spider_pic *pic = h->host_data;
- return node == pic->of_node;
-}
-
-static int spider_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw, unsigned int flags)
+static int spider_set_irq_type(unsigned int virq, unsigned int type)
{
- unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
- struct spider_pic *pic = h->host_data;
+ unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
+ struct spider_pic *pic = spider_virq_to_pic(virq);
+ unsigned int hw = irq_map[virq].hwirq;
void __iomem *cfg = spider_get_irq_config(pic, hw);
- int level = 0;
+ struct irq_desc *desc = get_irq_desc(virq);
+ u32 old_mask;
u32 ic;
/* Note that only level high is supported for most interrupts */
break;
case IRQ_TYPE_LEVEL_LOW:
ic = 0x0;
- level = 1;
break;
case IRQ_TYPE_LEVEL_HIGH:
case IRQ_TYPE_NONE:
ic = 0x1;
- level = 1;
break;
default:
return -EINVAL;
}
+ /* Update irq_desc */
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+ if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ desc->status |= IRQ_LEVEL;
+
/* Configure the source. One gross hack that was there before and
* that I've kept around is the priority to the BE which I set to
* be the same as the interrupt source number. I don't know wether
* that's supposed to make any kind of sense however, we'll have to
* decide that, but for now, I'm not changing the behaviour.
*/
- out_be32(cfg, (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe);
+ old_mask = in_be32(cfg) & 0x30000000u;
+ out_be32(cfg, old_mask | (ic << 24) | (0x7 << 16) |
+ (pic->node_id << 4) | 0xe);
out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff));
- if (level)
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ return 0;
+}
+
+static struct irq_chip spider_pic = {
+ .typename = " SPIDER ",
+ .unmask = spider_unmask_irq,
+ .mask = spider_mask_irq,
+ .ack = spider_ack_irq,
+ .set_type = spider_set_irq_type,
+};
+
+static int spider_host_match(struct irq_host *h, struct device_node *node)
+{
+ struct spider_pic *pic = h->host_data;
+ return node == pic->of_node;
+}
+
+static int spider_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq);
+
+ /* Set default irq type */
+ set_irq_type(virq, IRQ_TYPE_NONE);
+
return 0;
}
static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
{
unsigned int virq;
- u32 *imap, *tmp;
+ const u32 *imap, *tmp;
int imaplen, intsize, unit;
struct device_node *iic;
struct irq_host *iic_host;
#endif
/* Now do the horrible hacks */
- tmp = (u32 *)get_property(pic->of_node, "#interrupt-cells", NULL);
+ tmp = get_property(pic->of_node, "#interrupt-cells", NULL);
if (tmp == NULL)
return NO_IRQ;
intsize = *tmp;
- imap = (u32 *)get_property(pic->of_node, "interrupt-map", &imaplen);
+ imap = get_property(pic->of_node, "interrupt-map", &imaplen);
if (imap == NULL || imaplen < (intsize + 1))
return NO_IRQ;
iic = of_find_node_by_phandle(imap[intsize]);
if (iic == NULL)
return NO_IRQ;
imap += intsize + 1;
- tmp = (u32 *)get_property(iic, "#interrupt-cells", NULL);
+ tmp = get_property(iic, "#interrupt-cells", NULL);
if (tmp == NULL)
return NO_IRQ;
intsize = *tmp;
/* Assume unit is last entry of interrupt specifier */
unit = imap[intsize - 1];
/* Ok, we have a unit, now let's try to get the node */
- tmp = (u32 *)get_property(iic, "ibm,interrupt-server-ranges", NULL);
+ tmp = get_property(iic, "ibm,interrupt-server-ranges", NULL);
if (tmp == NULL) {
of_node_put(iic);
return NO_IRQ;
if (iic_host == NULL)
return NO_IRQ;
/* Manufacture an IIC interrupt number of class 2 */
- virq = irq_create_mapping(iic_host, 0x20 | unit, 0);
+ virq = irq_create_mapping(iic_host, 0x20 | unit);
if (virq == NO_IRQ)
printk(KERN_ERR "spider_pic: failed to map cascade !");
return virq;
git.openpandora.org / pandora-kernel.git / blobdiff