-/*arch/powerpc/platforms/8xx/mpc885ads_setup.c
- *
+/*
* Platform setup for the Freescale mpc885ads board
*
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* Copyright 2005 MontaVista Software Inc.
*
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/delay.h>
-#include <linux/root_dev.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/fsl_devices.h>
#include <linux/mii.h>
+#include <linux/of_platform.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/fs_pd.h>
-#include <asm/prom.h>
+#include <asm/udbg.h>
-extern void cpm_reset(void);
-extern void mpc8xx_show_cpuinfo(struct seq_file *);
-extern void mpc8xx_restart(char *cmd);
-extern void mpc8xx_calibrate_decr(void);
-extern int mpc8xx_set_rtc_time(struct rtc_time *tm);
-extern void mpc8xx_get_rtc_time(struct rtc_time *tm);
-extern void m8xx_pic_init(void);
-extern unsigned int mpc8xx_get_irq(void);
+#include "mpc885ads.h"
+#include "mpc8xx.h"
-static void init_smc1_uart_ioports(struct fs_uart_platform_info *fpi);
-static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi);
-static void init_scc3_ioports(struct fs_platform_info *ptr);
+static u32 __iomem *bcsr, *bcsr5;
#ifdef CONFIG_PCMCIA_M8XX
static void pcmcia_hw_setup(int slot, int enable)
{
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (enable)
- clrbits32(bcsr_io, BCSR1_PCCEN);
+ clrbits32(&bcsr[1], BCSR1_PCCEN);
else
- setbits32(bcsr_io, BCSR1_PCCEN);
-
- iounmap(bcsr_io);
+ setbits32(&bcsr[1], BCSR1_PCCEN);
}
static int pcmcia_set_voltage(int slot, int vcc, int vpp)
{
u32 reg = 0;
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
switch (vcc) {
case 0:
}
/* first, turn off all power */
- clrbits32(bcsr_io, 0x00610000);
+ clrbits32(&bcsr[1], 0x00610000);
/* enable new powersettings */
- setbits32(bcsr_io, reg);
+ setbits32(&bcsr[1], reg);
- iounmap(bcsr_io);
return 0;
}
#endif
-void __init mpc885ads_board_setup(void)
-{
- cpm8xx_t *cp;
- unsigned int *bcsr_io;
- u8 tmpval8;
-
-#ifdef CONFIG_FS_ENET
- iop8xx_t *io_port;
-#endif
+struct cpm_pin {
+ int port, pin, flags;
+};
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
- cp = (cpm8xx_t *) immr_map(im_cpm);
+static struct cpm_pin mpc885ads_pins[] = {
+ /* SMC1 */
+ {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
- if (bcsr_io == NULL) {
- printk(KERN_CRIT "Could not remap BCSR\n");
- return;
- }
-#ifdef CONFIG_SERIAL_CPM_SMC1
- clrbits32(bcsr_io, BCSR1_RS232EN_1);
- clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */
- tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX);
- out_8(&(cp->cp_smc[0].smc_smcm), tmpval8);
- clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); /* brg1 */
-#else
- setbits32(bcsr_io, BCSR1_RS232EN_1);
- out_be16(&cp->cp_smc[0].smc_smcmr, 0);
- out_8(&cp->cp_smc[0].smc_smce, 0);
+ /* SMC2 */
+#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ {CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
#endif
-#ifdef CONFIG_SERIAL_CPM_SMC2
- clrbits32(bcsr_io, BCSR1_RS232EN_2);
- clrbits32(&cp->cp_simode, 0xe0000000 >> 1);
- setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */
- tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX);
- out_8(&(cp->cp_smc[1].smc_smcm), tmpval8);
- clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN);
-
- init_smc2_uart_ioports(0);
-#else
- setbits32(bcsr_io, BCSR1_RS232EN_2);
- out_be16(&cp->cp_smc[1].smc_smcmr, 0);
- out_8(&cp->cp_smc[1].smc_smce, 0);
+ /* SCC3 */
+ {CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
+ {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
+ {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
+ {CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+ {CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
+ {CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
+
+ /* MII1 */
+ {CPM_PORTA, 0, CPM_PIN_INPUT},
+ {CPM_PORTA, 1, CPM_PIN_INPUT},
+ {CPM_PORTA, 2, CPM_PIN_INPUT},
+ {CPM_PORTA, 3, CPM_PIN_INPUT},
+ {CPM_PORTA, 4, CPM_PIN_OUTPUT},
+ {CPM_PORTA, 10, CPM_PIN_OUTPUT},
+ {CPM_PORTA, 11, CPM_PIN_OUTPUT},
+ {CPM_PORTB, 19, CPM_PIN_INPUT},
+ {CPM_PORTB, 31, CPM_PIN_INPUT},
+ {CPM_PORTC, 12, CPM_PIN_INPUT},
+ {CPM_PORTC, 13, CPM_PIN_INPUT},
+ {CPM_PORTE, 30, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 31, CPM_PIN_OUTPUT},
+
+ /* MII2 */
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 16, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {CPM_PORTE, 21, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 22, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 23, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 24, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 25, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 26, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 27, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 28, CPM_PIN_OUTPUT},
+ {CPM_PORTE, 29, CPM_PIN_OUTPUT},
#endif
- immr_unmap(cp);
- iounmap(bcsr_io);
-
-#ifdef CONFIG_FS_ENET
- /* use MDC for MII (common) */
- io_port = (iop8xx_t *) immr_map(im_ioport);
- setbits16(&io_port->iop_pdpar, 0x0080);
- clrbits16(&io_port->iop_pddir, 0x0080);
-
- bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
- clrbits32(bcsr_io, BCSR5_MII1_EN);
- clrbits32(bcsr_io, BCSR5_MII1_RST);
-#ifndef CONFIG_FC_ENET_HAS_SCC
- clrbits32(bcsr_io, BCSR5_MII2_EN);
- clrbits32(bcsr_io, BCSR5_MII2_RST);
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+};
-#endif
- iounmap(bcsr_io);
- immr_unmap(io_port);
-
-#endif
-
-#ifdef CONFIG_PCMCIA_M8XX
- /*Set up board specific hook-ups */
- m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
- m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
-#endif
-}
-
-static void init_fec1_ioports(struct fs_platform_info *ptr)
+static void __init init_ioports(void)
{
- cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm);
- iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport);
+ int i;
- /* configure FEC1 pins */
- setbits16(&io_port->iop_papar, 0xf830);
- setbits16(&io_port->iop_padir, 0x0830);
- clrbits16(&io_port->iop_padir, 0xf000);
-
- setbits32(&cp->cp_pbpar, 0x00001001);
- clrbits32(&cp->cp_pbdir, 0x00001001);
-
- setbits16(&io_port->iop_pcpar, 0x000c);
- clrbits16(&io_port->iop_pcdir, 0x000c);
+ for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
+ struct cpm_pin *pin = &mpc885ads_pins[i];
+ cpm1_set_pin(pin->port, pin->pin, pin->flags);
+ }
- setbits32(&cp->cp_pepar, 0x00000003);
- setbits32(&cp->cp_pedir, 0x00000003);
- clrbits32(&cp->cp_peso, 0x00000003);
- clrbits32(&cp->cp_cptr, 0x00000100);
+ cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
+ cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
- immr_unmap(io_port);
- immr_unmap(cp);
+ /* Set FEC1 and FEC2 to MII mode */
+ clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
}
-static void init_fec2_ioports(struct fs_platform_info *ptr)
+static void __init mpc885ads_setup_arch(void)
{
- cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm);
- iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport);
-
- /* configure FEC2 pins */
- setbits32(&cp->cp_pepar, 0x0003fffc);
- setbits32(&cp->cp_pedir, 0x0003fffc);
- clrbits32(&cp->cp_peso, 0x000087fc);
- setbits32(&cp->cp_peso, 0x00037800);
- clrbits32(&cp->cp_cptr, 0x00000080);
-
- immr_unmap(io_port);
- immr_unmap(cp);
-}
+ struct device_node *np;
-void init_fec_ioports(struct fs_platform_info *fpi)
-{
- int fec_no = fs_get_fec_index(fpi->fs_no);
+ cpm_reset();
+ init_ioports();
- switch (fec_no) {
- case 0:
- init_fec1_ioports(fpi);
- break;
- case 1:
- init_fec2_ioports(fpi);
- break;
- default:
- printk(KERN_ERR "init_fec_ioports: invalid FEC number\n");
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
+ if (!np) {
+ printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
return;
}
-}
-
-static void init_scc3_ioports(struct fs_platform_info *fpi)
-{
- unsigned *bcsr_io;
- iop8xx_t *io_port;
- cpm8xx_t *cp;
- bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
- io_port = (iop8xx_t *) immr_map(im_ioport);
- cp = (cpm8xx_t *) immr_map(im_cpm);
+ bcsr = of_iomap(np, 0);
+ bcsr5 = of_iomap(np, 1);
+ of_node_put(np);
- if (bcsr_io == NULL) {
+ if (!bcsr || !bcsr5) {
printk(KERN_CRIT "Could not remap BCSR\n");
return;
}
- /* Enable the PHY.
- */
- clrbits32(bcsr_io + 4, BCSR4_ETH10_RST);
- udelay(1000);
- setbits32(bcsr_io + 4, BCSR4_ETH10_RST);
- /* Configure port A pins for Txd and Rxd.
- */
- setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD);
- clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD);
+ clrbits32(&bcsr[1], BCSR1_RS232EN_1);
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ setbits32(&bcsr[1], BCSR1_RS232EN_2);
+#else
+ clrbits32(&bcsr[1], BCSR1_RS232EN_2);
+#endif
- /* Configure port C pins to enable CLSN and RENA.
- */
- clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
- clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
- setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
+ clrbits32(bcsr5, BCSR5_MII1_EN);
+ setbits32(bcsr5, BCSR5_MII1_RST);
+ udelay(1000);
+ clrbits32(bcsr5, BCSR5_MII1_RST);
- /* Configure port E for TCLK and RCLK.
- */
- setbits32(&cp->cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
- clrbits32(&cp->cp_pepar, PE_ENET_TENA);
- clrbits32(&cp->cp_pedir, PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
- clrbits32(&cp->cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
- setbits32(&cp->cp_peso, PE_ENET_TENA);
-
- /* Configure Serial Interface clock routing.
- * First, clear all SCC bits to zero, then set the ones we want.
- */
- clrbits32(&cp->cp_sicr, SICR_ENET_MASK);
- setbits32(&cp->cp_sicr, SICR_ENET_CLKRT);
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+ clrbits32(bcsr5, BCSR5_MII2_EN);
+ setbits32(bcsr5, BCSR5_MII2_RST);
+ udelay(1000);
+ clrbits32(bcsr5, BCSR5_MII2_RST);
+#else
+ setbits32(bcsr5, BCSR5_MII2_EN);
+#endif
- /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
- */
- clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);
- /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
- * by H/W setting after reset. SCC ethernet controller support only half duplex.
- * This discrepancy of modes causes a lot of carrier lost errors.
- */
+#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
+ clrbits32(&bcsr[4], BCSR4_ETH10_RST);
+ udelay(1000);
+ setbits32(&bcsr[4], BCSR4_ETH10_RST);
- /* In the original SCC enet driver the following code is placed at
- the end of the initialization */
- setbits32(&cp->cp_pepar, PE_ENET_TENA);
- clrbits32(&cp->cp_pedir, PE_ENET_TENA);
- setbits32(&cp->cp_peso, PE_ENET_TENA);
+ setbits32(&bcsr[1], BCSR1_ETHEN);
- setbits32(bcsr_io + 4, BCSR1_ETHEN);
- iounmap(bcsr_io);
- immr_unmap(io_port);
- immr_unmap(cp);
-}
+ np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
+#else
+ np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
+#endif
-void init_scc_ioports(struct fs_platform_info *fpi)
-{
- int scc_no = fs_get_scc_index(fpi->fs_no);
+ /* The SCC3 enet registers overlap the SMC1 registers, so
+ * one of the two must be removed from the device tree.
+ */
- switch (scc_no) {
- case 2:
- init_scc3_ioports(fpi);
- break;
- default:
- printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
- return;
+ if (np) {
+ of_detach_node(np);
+ of_node_put(np);
}
-}
-
-static void init_smc1_uart_ioports(struct fs_uart_platform_info *ptr)
-{
- unsigned *bcsr_io;
- cpm8xx_t *cp;
-
- cp = (cpm8xx_t *) immr_map(im_cpm);
- setbits32(&cp->cp_pepar, 0x000000c0);
- clrbits32(&cp->cp_pedir, 0x000000c0);
- clrbits32(&cp->cp_peso, 0x00000040);
- setbits32(&cp->cp_peso, 0x00000080);
- immr_unmap(cp);
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
- if (bcsr_io == NULL) {
- printk(KERN_CRIT "Could not remap BCSR1\n");
- return;
- }
- clrbits32(bcsr_io, BCSR1_RS232EN_1);
- iounmap(bcsr_io);
+#ifdef CONFIG_PCMCIA_M8XX
+ /* Set up board specific hook-ups.*/
+ m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
+ m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
+#endif
}
-static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi)
+static int __init mpc885ads_probe(void)
{
- unsigned *bcsr_io;
- cpm8xx_t *cp;
-
- cp = (cpm8xx_t *) immr_map(im_cpm);
- setbits32(&cp->cp_pepar, 0x00000c00);
- clrbits32(&cp->cp_pedir, 0x00000c00);
- clrbits32(&cp->cp_peso, 0x00000400);
- setbits32(&cp->cp_peso, 0x00000800);
- immr_unmap(cp);
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
- if (bcsr_io == NULL) {
- printk(KERN_CRIT "Could not remap BCSR1\n");
- return;
- }
- clrbits32(bcsr_io, BCSR1_RS232EN_2);
- iounmap(bcsr_io);
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
}
-void init_smc_ioports(struct fs_uart_platform_info *data)
-{
- int smc_no = fs_uart_id_fsid2smc(data->fs_no);
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
- switch (smc_no) {
- case 0:
- init_smc1_uart_ioports(data);
- data->brg = data->clk_rx;
- break;
- case 1:
- init_smc2_uart_ioports(data);
- data->brg = data->clk_rx;
- break;
- default:
- printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
- return;
- }
-}
-
-int platform_device_skip(const char *model, int id)
+static int __init declare_of_platform_devices(void)
{
-#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
- const char *dev = "FEC";
- int n = 2;
-#else
- const char *dev = "SCC";
- int n = 3;
-#endif
-
- if (!strcmp(model, dev) && n == id)
- return 1;
+ /* Publish the QE devices */
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
-
-static void __init mpc885ads_setup_arch(void)
-{
- cpm_reset();
-
- mpc885ads_board_setup();
-
- ROOT_DEV = Root_NFS;
-}
-
-static int __init mpc885ads_probe(void)
-{
- char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "model", NULL);
- if (model == NULL)
- return 0;
- if (strcmp(model, "MPC885ADS"))
- return 0;
-
- return 1;
-}
-
-define_machine(mpc885_ads)
-{
-.name = "MPC885 ADS",.probe = mpc885ads_probe,.setup_arch =
- mpc885ads_setup_arch,.init_IRQ =
- m8xx_pic_init,.show_cpuinfo = mpc8xx_show_cpuinfo,.get_irq =
- mpc8xx_get_irq,.restart = mpc8xx_restart,.calibrate_decr =
- mpc8xx_calibrate_decr,.set_rtc_time =
- mpc8xx_set_rtc_time,.get_rtc_time = mpc8xx_get_rtc_time,};
+machine_device_initcall(mpc885_ads, declare_of_platform_devices);
+
+define_machine(mpc885_ads) {
+ .name = "Freescale MPC885 ADS",
+ .probe = mpc885ads_probe,
+ .setup_arch = mpc885ads_setup_arch,
+ .init_IRQ = mpc8xx_pics_init,
+ .get_irq = mpc8xx_get_irq,
+ .restart = mpc8xx_restart,
+ .calibrate_decr = mpc8xx_calibrate_decr,
+ .set_rtc_time = mpc8xx_set_rtc_time,
+ .get_rtc_time = mpc8xx_get_rtc_time,
+ .progress = udbg_progress,
+};
git.openpandora.org / pandora-kernel.git / blobdiff