*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
* Recode: Jason Jin <jason.jin@freescale.com>
+ * York Sun <yorksun@freescale.com>
*
* Rewrite the interrupt routing. remove the 8259PIC support,
* All the integrated device in ULI use sideband interrupt.
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+#include "mpc86xx.h"
+
+static unsigned char *pixis_bdcfg0, *pixis_arch;
+
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
+ { .compatible = "simple-bus", },
{}
};
}
machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
-static void __init
-mpc86xx_hpcd_init_irq(void)
-{
- struct mpic *mpic1;
- struct device_node *np;
- struct resource res;
-
- /* Determine PIC address. */
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL)
- return;
- of_address_to_resource(np, 0, &res);
-
- /* Alloc mpic structure and per isu has 16 INT entries. */
- mpic1 = mpic_alloc(np, res.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
- 0, 256, " MPIC ");
- BUG_ON(mpic1 == NULL);
-
- mpic_init(mpic1);
-}
-
#ifdef CONFIG_PCI
static void __devinit quirk_uli1575(struct pci_dev *dev)
{
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
#endif /* CONFIG_PCI */
-static void __init
-mpc86xx_hpcd_setup_arch(void)
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+static u32 get_busfreq(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
+ struct device_node *node;
+
+ u32 fs_busfreq = 0;
+ node = of_find_node_by_type(NULL, "cpu");
+ if (node) {
+ unsigned int size;
+ const unsigned int *prop =
+ of_get_property(node, "bus-frequency", &size);
+ if (prop)
+ fs_busfreq = *prop;
+ of_node_put(node);
+ };
+ return fs_busfreq;
+}
+
+unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
+ int monitor_port)
+{
+ static const unsigned long pixelformat[][3] = {
+ {0x88882317, 0x88083218, 0x65052119},
+ {0x88883316, 0x88082219, 0x65053118},
+ };
+ unsigned int pix_fmt, arch_monitor;
+
+ arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
+ /* DVI port for board version 0x01 */
+
+ if (bits_per_pixel == 32)
+ pix_fmt = pixelformat[arch_monitor][0];
+ else if (bits_per_pixel == 24)
+ pix_fmt = pixelformat[arch_monitor][1];
+ else if (bits_per_pixel == 16)
+ pix_fmt = pixelformat[arch_monitor][2];
+ else
+ pix_fmt = pixelformat[1][0];
+
+ return pix_fmt;
+}
+
+void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
+{
+ int i;
+ if (monitor_port == 2) { /* dual link LVDS */
+ for (i = 0; i < 256*3; i++)
+ gamma_table_base[i] = (gamma_table_base[i] << 2) |
+ ((gamma_table_base[i] >> 6) & 0x03);
+ }
+}
+
+#define PX_BRDCFG0_DVISEL (1 << 3)
+#define PX_BRDCFG0_DLINK (1 << 4)
+#define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
+
+void mpc8610hpcd_set_monitor_port(int monitor_port)
+{
+ static const u8 bdcfg[] = {
+ PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
+ PX_BRDCFG0_DLINK,
+ 0,
+ };
+
+ if (monitor_port < 3)
+ clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+ bdcfg[monitor_port]);
+}
+
+void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
+{
+ u32 __iomem *clkdvdr;
+ u32 temp;
+ /* variables for pixel clock calcs */
+ ulong bestval, bestfreq, speed_ccb, minpixclock, maxpixclock;
+ ulong pixval;
+ long err;
+ int i;
+
+ clkdvdr = ioremap(get_immrbase() + 0xe0800, sizeof(u32));
+ if (!clkdvdr) {
+ printk(KERN_ERR "Err: can't map clock divider register!\n");
+ return;
+ }
+
+ /* Pixel Clock configuration */
+ pr_debug("DIU: Bus Frequency = %d\n", get_busfreq());
+ speed_ccb = get_busfreq();
+
+ /* Calculate the pixel clock with the smallest error */
+ /* calculate the following in steps to avoid overflow */
+ pr_debug("DIU pixclock in ps - %d\n", pixclock);
+ temp = 1000000000/pixclock;
+ temp *= 1000;
+ pixclock = temp;
+ pr_debug("DIU pixclock freq - %u\n", pixclock);
+
+ temp = pixclock * 5 / 100;
+ pr_debug("deviation = %d\n", temp);
+ minpixclock = pixclock - temp;
+ maxpixclock = pixclock + temp;
+ pr_debug("DIU minpixclock - %lu\n", minpixclock);
+ pr_debug("DIU maxpixclock - %lu\n", maxpixclock);
+ pixval = speed_ccb/pixclock;
+ pr_debug("DIU pixval = %lu\n", pixval);
+
+ err = 100000000;
+ bestval = pixval;
+ pr_debug("DIU bestval = %lu\n", bestval);
+
+ bestfreq = 0;
+ for (i = -1; i <= 1; i++) {
+ temp = speed_ccb / ((pixval+i) + 1);
+ pr_debug("DIU test pixval i= %d, pixval=%lu, temp freq. = %u\n",
+ i, pixval, temp);
+ if ((temp < minpixclock) || (temp > maxpixclock))
+ pr_debug("DIU exceeds monitor range (%lu to %lu)\n",
+ minpixclock, maxpixclock);
+ else if (abs(temp - pixclock) < err) {
+ pr_debug("Entered the else if block %d\n", i);
+ err = abs(temp - pixclock);
+ bestval = pixval+i;
+ bestfreq = temp;
+ }
+ }
+
+ pr_debug("DIU chose = %lx\n", bestval);
+ pr_debug("DIU error = %ld\n NomPixClk ", err);
+ pr_debug("DIU: Best Freq = %lx\n", bestfreq);
+ /* Modify PXCLK in GUTS CLKDVDR */
+ pr_debug("DIU: Current value of CLKDVDR = 0x%08x\n", (*clkdvdr));
+ temp = (*clkdvdr) & 0x2000FFFF;
+ *clkdvdr = temp; /* turn off clock */
+ *clkdvdr = temp | 0x80000000 | (((bestval) & 0x1F) << 16);
+ pr_debug("DIU: Modified value of CLKDVDR = 0x%08x\n", (*clkdvdr));
+ iounmap(clkdvdr);
+}
+
+ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE,
+ "%c0 - DVI\n"
+ "%c1 - Single link LVDS\n"
+ "%c2 - Dual link LVDS\n",
+ monitor_port == 0 ? '*' : ' ',
+ monitor_port == 1 ? '*' : ' ',
+ monitor_port == 2 ? '*' : ' ');
+}
+
+int mpc8610hpcd_set_sysfs_monitor_port(int val)
+{
+ return val < 3 ? val : 0;
+}
+
#endif
+
+static void __init mpc86xx_hpcd_setup_arch(void)
+{
+ struct resource r;
+ struct device_node *np;
+ unsigned char *pixis;
+
if (ppc_md.progress)
ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
}
}
#endif
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+ preallocate_diu_videomemory();
+ diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format;
+ diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table;
+ diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port;
+ diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock;
+ diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port;
+ diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
+#endif
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
+ if (np) {
+ of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ pixis = ioremap(r.start, 32);
+ if (!pixis) {
+ printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
+ return;
+ }
+ pixis_bdcfg0 = pixis + 8;
+ pixis_arch = pixis + 1;
+ } else
+ printk(KERN_ERR "Err: "
+ "can't find device node 'fsl,fpga-pixis'\n");
printk("MPC86xx HPCD board from Freescale Semiconductor\n");
}
return 0;
}
-static long __init
-mpc86xx_time_init(void)
+static long __init mpc86xx_time_init(void)
{
unsigned int temp;
.name = "MPC86xx HPCD",
.probe = mpc86xx_hpcd_probe,
.setup_arch = mpc86xx_hpcd_setup_arch,
- .init_IRQ = mpc86xx_hpcd_init_irq,
+ .init_IRQ = mpc86xx_init_irq,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.time_init = mpc86xx_time_init,
git.openpandora.org / pandora-kernel.git / blobdiff