#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
+#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/prom.h>
#include <asm/mpic.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
-#include "mpc85xx.h"
+#include <sysdev/fsl_pci.h>
#ifdef CONFIG_CPM2
-#include <linux/fs_enet_pd.h>
#include <asm/cpm2.h>
#include <sysdev/cpm2_pic.h>
-#include <asm/fs_pd.h>
-#endif
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
#endif
#ifdef CONFIG_PCI
-static int mpc85xx_exclude_device(u_char bus, u_char devfn)
+static int mpc85xx_exclude_device(struct pci_controller *hose,
+ u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
{
int cascade_irq;
- while ((cascade_irq = cpm2_get_irq()) >= 0) {
+ while ((cascade_irq = cpm2_get_irq()) >= 0)
generic_handle_irq(cascade_irq);
- }
+
desc->chip->eoi(irq);
}
#endif
np = of_find_node_by_type(np, "open-pic");
-
- if (np == NULL) {
+ if (!np) {
printk(KERN_ERR "Could not find open-pic node\n");
return;
}
- if(of_address_to_resource(np, 0, &r)) {
+ if (of_address_to_resource(np, 0, &r)) {
printk(KERN_ERR "Could not map mpic register space\n");
of_node_put(np);
return;
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
- 4, 0, " OpenPIC ");
+ 0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
- mpic_assign_isu(mpic, 0, r.start + 0x10200);
- mpic_assign_isu(mpic, 1, r.start + 0x10280);
- mpic_assign_isu(mpic, 2, r.start + 0x10300);
- mpic_assign_isu(mpic, 3, r.start + 0x10380);
- mpic_assign_isu(mpic, 4, r.start + 0x10400);
- mpic_assign_isu(mpic, 5, r.start + 0x10480);
- mpic_assign_isu(mpic, 6, r.start + 0x10500);
- mpic_assign_isu(mpic, 7, r.start + 0x10580);
-
- /* Unused on this platform (leave room for 8548) */
- mpic_assign_isu(mpic, 8, r.start + 0x10600);
- mpic_assign_isu(mpic, 9, r.start + 0x10680);
- mpic_assign_isu(mpic, 10, r.start + 0x10700);
- mpic_assign_isu(mpic, 11, r.start + 0x10780);
-
- /* External Interrupts */
- mpic_assign_isu(mpic, 12, r.start + 0x10000);
- mpic_assign_isu(mpic, 13, r.start + 0x10080);
- mpic_assign_isu(mpic, 14, r.start + 0x10100);
-
mpic_init(mpic);
#ifdef CONFIG_CPM2
/* Setup CPM2 PIC */
- np = of_find_node_by_type(NULL, "cpm-pic");
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
- return;
+ printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+ return;
}
irq = irq_of_parse_and_map(np, 0);
cpm2_pic_init(np);
+ of_node_put(np);
set_irq_chained_handler(irq, cpm2_cascade);
#endif
}
* Setup the architecture
*/
#ifdef CONFIG_CPM2
-void init_fcc_ioports(struct fs_platform_info *fpi)
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static const struct cpm_pin mpc8560_ads_pins[] = {
+ /* SCC1 */
+ {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* SCC2 */
+ {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* FCC2 */
+ {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
+ {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
+
+ /* FCC3 */
+ {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
+ {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
+};
+
+static void __init init_ioports(void)
{
- struct io_port *io = cpm2_map(im_ioport);
- int fcc_no = fs_get_fcc_index(fpi->fs_no);
- int target;
- u32 tempval;
-
- switch(fcc_no) {
- case 1:
- tempval = in_be32(&io->iop_pdirb);
- tempval &= ~PB2_DIRB0;
- tempval |= PB2_DIRB1;
- out_be32(&io->iop_pdirb, tempval);
-
- tempval = in_be32(&io->iop_psorb);
- tempval &= ~PB2_PSORB0;
- tempval |= PB2_PSORB1;
- out_be32(&io->iop_psorb, tempval);
-
- tempval = in_be32(&io->iop_pparb);
- tempval |= (PB2_DIRB0 | PB2_DIRB1);
- out_be32(&io->iop_pparb, tempval);
-
- target = CPM_CLK_FCC2;
- break;
- case 2:
- tempval = in_be32(&io->iop_pdirb);
- tempval &= ~PB3_DIRB0;
- tempval |= PB3_DIRB1;
- out_be32(&io->iop_pdirb, tempval);
-
- tempval = in_be32(&io->iop_psorb);
- tempval &= ~PB3_PSORB0;
- tempval |= PB3_PSORB1;
- out_be32(&io->iop_psorb, tempval);
-
- tempval = in_be32(&io->iop_pparb);
- tempval |= (PB3_DIRB0 | PB3_DIRB1);
- out_be32(&io->iop_pparb, tempval);
-
- tempval = in_be32(&io->iop_pdirc);
- tempval |= PC3_DIRC1;
- out_be32(&io->iop_pdirc, tempval);
-
- tempval = in_be32(&io->iop_pparc);
- tempval |= PC3_DIRC1;
- out_be32(&io->iop_pparc, tempval);
-
- target = CPM_CLK_FCC3;
- break;
- default:
- printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
- return;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
+ struct cpm_pin *pin = &mpc8560_ads_pins[i];
+ cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
- /* Port C has clocks...... */
- tempval = in_be32(&io->iop_psorc);
- tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
- out_be32(&io->iop_psorc, tempval);
-
- tempval = in_be32(&io->iop_pdirc);
- tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
- out_be32(&io->iop_pdirc, tempval);
- tempval = in_be32(&io->iop_pparc);
- tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
- out_be32(&io->iop_pparc, tempval);
-
- cpm2_unmap(io);
-
- /* Configure Serial Interface clock routing.
- * First, clear FCC bits to zero,
- * then set the ones we want.
- */
- cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX);
- cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
}
#endif
static void __init mpc85xx_ads_setup_arch(void)
{
- struct device_node *cpu;
#ifdef CONFIG_PCI
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
- cpu = of_find_node_by_type(NULL, "cpu");
- if (cpu != 0) {
- const unsigned int *fp;
-
- fp = of_get_property(cpu, "clock-frequency", NULL);
- if (fp != 0)
- loops_per_jiffy = *fp / HZ;
- else
- loops_per_jiffy = 50000000 / HZ;
- of_node_put(cpu);
- }
-
#ifdef CONFIG_CPM2
cpm2_reset();
+ init_ioports();
#endif
#ifdef CONFIG_PCI
- for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
- add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
+ fsl_add_bridge(np, 1);
+
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
}
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
}
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .type = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
+
/*
* Called very early, device-tree isn't unflattened
*/
.init_IRQ = mpc85xx_ads_pic_init,
.show_cpuinfo = mpc85xx_ads_show_cpuinfo,
.get_irq = mpic_get_irq,
- .restart = mpc85xx_restart,
+ .restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
git.openpandora.org / pandora-kernel.git / blobdiff