#undef DEBUG_PROM
#include <stdarg.h>
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
-static unsigned long __initdata prom_memory_limit;
-
static unsigned long __initdata alloc_top;
static unsigned long __initdata alloc_top_high;
static unsigned long __initdata alloc_bottom;
static unsigned long __initdata rmo_top;
static unsigned long __initdata ram_top;
-#ifdef CONFIG_KEXEC
-static unsigned long __initdata prom_crashk_base;
-static unsigned long __initdata prom_crashk_size;
-#endif
-
static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE];
static int __initdata mem_reserve_cnt;
if ((long)_prom->chosen > 0)
l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
#ifdef CONFIG_CMDLINE
- if (l == 0) /* dbl check */
+ if (l <= 0 || p[0] == '\0') /* dbl check */
strlcpy(RELOC(prom_cmd_line),
RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line));
#endif /* CONFIG_CMDLINE */
RELOC(iommu_force_on) = 1;
}
#endif
-
- opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
- if (opt) {
- opt += 4;
- RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
-#ifdef CONFIG_PPC64
- /* Align to 16 MB == size of ppc64 large page */
- RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
-#endif
- }
-
-#ifdef CONFIG_KEXEC
- /*
- * crashkernel=size@addr specifies the location to reserve for
- * crash kernel.
- */
- opt = strstr(RELOC(prom_cmd_line), RELOC("crashkernel="));
- if (opt) {
- opt += 12;
- RELOC(prom_crashk_size) =
- prom_memparse(opt, (const char **)&opt);
-
- if (ALIGN(RELOC(prom_crashk_size), 0x1000000) !=
- RELOC(prom_crashk_size)) {
- prom_printf("Warning: crashkernel size is not "
- "aligned to 16MB\n");
- }
-
- /*
- * At present, the crash kernel always run at 32MB.
- * Just ignore whatever user passed.
- */
- RELOC(prom_crashk_base) = 0x2000000;
- if (*opt == '@') {
- prom_printf("Warning: PPC64 kdump kernel always runs "
- "at 32 MB\n");
- }
- }
-#endif
}
#ifdef CONFIG_PPC_PSERIES
}
/*
- * Initialize memory allocation mecanism, parse "memory" nodes and
+ * Initialize memory allocation mechanism, parse "memory" nodes and
* obtain that way the top of memory and RMO to setup out local allocator
*/
static void __init prom_init_mem(void)
RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
}
- /*
- * If prom_memory_limit is set we reduce the upper limits *except* for
- * alloc_top_high. This must be the real top of RAM so we can put
- * TCE's up there.
- */
-
- RELOC(alloc_top_high) = RELOC(ram_top);
-
- if (RELOC(prom_memory_limit)) {
- if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
- prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
- RELOC(prom_memory_limit));
- RELOC(prom_memory_limit) = 0;
- } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
- prom_printf("Ignoring mem=%x >= ram_top.\n",
- RELOC(prom_memory_limit));
- RELOC(prom_memory_limit) = 0;
- } else {
- RELOC(ram_top) = RELOC(prom_memory_limit);
- RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
- }
- }
-
/*
* Setup our top alloc point, that is top of RMO or top of
* segment 0 when running non-LPAR.
RELOC(rmo_top) = RELOC(ram_top);
RELOC(rmo_top) = min(0x30000000ul, RELOC(rmo_top));
RELOC(alloc_top) = RELOC(rmo_top);
+ RELOC(alloc_top_high) = RELOC(ram_top);
prom_printf("memory layout at init:\n");
- prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
prom_printf(" alloc_top : %x\n", RELOC(alloc_top));
prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high));
prom_printf(" rmo_top : %x\n", RELOC(rmo_top));
prom_printf(" ram_top : %x\n", RELOC(ram_top));
-#ifdef CONFIG_KEXEC
- if (RELOC(prom_crashk_base)) {
- prom_printf(" crashk_base : %x\n", RELOC(prom_crashk_base));
- prom_printf(" crashk_size : %x\n", RELOC(prom_crashk_size));
- }
-#endif
}
reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom);
- if (RELOC(prom_memory_limit)) {
- /*
- * We align the start to a 16MB boundary so we can map
- * the TCE area using large pages if possible.
- * The end should be the top of RAM so no need to align it.
- */
- RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom,
- 0x1000000);
- RELOC(prom_tce_alloc_end) = local_alloc_top;
- }
+ /* These are only really needed if there is a memory limit in
+ * effect, but we don't know so export them always. */
+ RELOC(prom_tce_alloc_start) = local_alloc_bottom;
+ RELOC(prom_tce_alloc_end) = local_alloc_top;
/* Flag the first invalid entry */
prom_debug("ending prom_initialize_tce_table\n");
/* Version 16 is not backward compatible */
hdr->last_comp_version = 0x10;
- /* Reserve the whole thing and copy the reserve map in, we
- * also bump mem_reserve_cnt to cause further reservations to
- * fail since it's too late.
- */
- reserve_mem(RELOC(dt_header_start), hdr->totalsize);
+ /* Copy the reserve map in */
memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map));
#ifdef DEBUG_PROM
RELOC(mem_reserve_map)[i].size);
}
#endif
+ /* Bump mem_reserve_cnt to cause further reservations to fail
+ * since it's too late.
+ */
RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE;
prom_printf("Device tree strings 0x%x -> 0x%x\n",
static void __init fixup_device_tree_maple(void)
{
phandle isa;
+ u32 rloc = 0x01002000; /* IO space; PCI device = 4 */
u32 isa_ranges[6];
-
- isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+ char *name;
+
+ name = "/ht@0/isa@4";
+ isa = call_prom("finddevice", 1, 1, ADDR(name));
+ if (!PHANDLE_VALID(isa)) {
+ name = "/ht@0/isa@6";
+ isa = call_prom("finddevice", 1, 1, ADDR(name));
+ rloc = 0x01003000; /* IO space; PCI device = 6 */
+ }
if (!PHANDLE_VALID(isa))
return;
+ if (prom_getproplen(isa, "ranges") != 12)
+ return;
if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
== PROM_ERROR)
return;
isa_ranges[2] != 0x00010000)
return;
- prom_printf("fixing up bogus ISA range on Maple...\n");
+ prom_printf("Fixing up bogus ISA range on Maple/Apache...\n");
isa_ranges[0] = 0x1;
isa_ranges[1] = 0x0;
- isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+ isa_ranges[2] = rloc;
isa_ranges[3] = 0x0;
isa_ranges[4] = 0x0;
isa_ranges[5] = 0x00010000;
- prom_setprop(isa, "/ht@0/isa@4", "ranges",
+ prom_setprop(isa, name, "ranges",
isa_ranges, sizeof(isa_ranges));
}
#else
*/
prom_init_mem();
-#ifdef CONFIG_KEXEC
- if (RELOC(prom_crashk_base))
- reserve_mem(RELOC(prom_crashk_base), RELOC(prom_crashk_size));
-#endif
/*
* Determine which cpu is actually running right _now_
*/
/*
* Fill in some infos for use by the kernel later on
*/
- if (RELOC(prom_memory_limit))
- prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
- &RELOC(prom_memory_limit),
- sizeof(prom_memory_limit));
#ifdef CONFIG_PPC64
if (RELOC(ppc64_iommu_off))
prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
}
#endif
-#ifdef CONFIG_KEXEC
- if (RELOC(prom_crashk_base)) {
- prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-base",
- PTRRELOC(&prom_crashk_base),
- sizeof(RELOC(prom_crashk_base)));
- prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-size",
- PTRRELOC(&prom_crashk_size),
- sizeof(RELOC(prom_crashk_size)));
- }
-#endif
/*
* Fixup any known bugs in the device-tree
*/
git.openpandora.org / pandora-kernel.git / blobdiff