struct device_node *np;
unsigned int speed;
unsigned int clock;
+ int irq_check_parent;
phys_addr_t taddr;
} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
static unsigned int legacy_serial_count;
static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
phys_addr_t taddr, unsigned long irq,
- upf_t flags)
+ upf_t flags, int irq_check_parent)
{
- u32 *clk, *spd, clock = BASE_BAUD * 16;
+ const u32 *clk, *spd;
+ u32 clock = BASE_BAUD * 16;
int index;
/* get clock freq. if present */
- clk = (u32 *)get_property(np, "clock-frequency", NULL);
+ clk = get_property(np, "clock-frequency", NULL);
if (clk && *clk)
clock = *clk;
/* get default speed if present */
- spd = (u32 *)get_property(np, "current-speed", NULL);
+ spd = get_property(np, "current-speed", NULL);
/* If we have a location index, then try to use it */
if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
if (legacy_serial_infos[index].np != 0) {
/* if we still have some room, move it, else override */
if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
- printk(KERN_INFO "Moved legacy port %d -> %d\n",
+ printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
index, legacy_serial_count);
legacy_serial_ports[legacy_serial_count] =
legacy_serial_ports[index];
legacy_serial_infos[index];
legacy_serial_count++;
} else {
- printk(KERN_INFO "Replacing legacy port %d\n", index);
+ printk(KERN_DEBUG "Replacing legacy port %d\n", index);
}
}
legacy_serial_infos[index].np = of_node_get(np);
legacy_serial_infos[index].clock = clock;
legacy_serial_infos[index].speed = spd ? *spd : 0;
+ legacy_serial_infos[index].irq_check_parent = irq_check_parent;
- printk(KERN_INFO "Found legacy serial port %d for %s\n",
+ printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
index, np->full_name);
- printk(KERN_INFO " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
+ printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
(iotype == UPIO_PORT) ? "port" : "mem",
(unsigned long long)base, (unsigned long long)taddr, irq,
legacy_serial_ports[index].uartclk,
static int __init add_legacy_soc_port(struct device_node *np,
struct device_node *soc_dev)
{
- phys_addr_t addr;
- u32 *addrp;
+ u64 addr;
+ const u32 *addrp;
upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ struct device_node *tsi = of_get_parent(np);
/* We only support ports that have a clock frequency properly
* encoded in the device-tree.
return -1;
addr = of_translate_address(soc_dev, addrp);
+ if (addr == OF_BAD_ADDR)
+ return -1;
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
- return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags);
+ if (tsi && !strcmp(tsi->type, "tsi-bridge"))
+ return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+ else
+ return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
}
static int __init add_legacy_isa_port(struct device_node *np,
struct device_node *isa_brg)
{
- u32 *reg;
- char *typep;
+ const u32 *reg;
+ const char *typep;
int index = -1;
- phys_addr_t taddr;
+ u64 taddr;
+
+ DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
/* Get the ISA port number */
- reg = (u32 *)get_property(np, "reg", NULL);
+ reg = get_property(np, "reg", NULL);
if (reg == NULL)
return -1;
/* Now look for an "ibm,aix-loc" property that gives us ordering
* if any...
*/
- typep = (char *)get_property(np, "ibm,aix-loc", NULL);
+ typep = get_property(np, "ibm,aix-loc", NULL);
/* If we have a location index, then use it */
if (typep && *typep == 'S')
index = simple_strtol(typep+1, NULL, 0) - 1;
- /* Translate ISA address */
+ /* Translate ISA address. If it fails, we still register the port
+ * with no translated address so that it can be picked up as an IO
+ * port later by the serial driver
+ */
taddr = of_translate_address(np, reg);
+ if (taddr == OF_BAD_ADDR)
+ taddr = 0;
/* Add port, irq will be dealt with later */
- return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF);
+ return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr,
+ NO_IRQ, UPF_BOOT_AUTOCONF, 0);
}
static int __init add_legacy_pci_port(struct device_node *np,
struct device_node *pci_dev)
{
- phys_addr_t addr, base;
- u32 *addrp;
+ u64 addr, base;
+ const u32 *addrp;
unsigned int flags;
int iotype, index = -1, lindex = 0;
+ DBG(" -> add_legacy_pci_port(%s)\n", np->full_name);
+
/* We only support ports that have a clock frequency properly
* encoded in the device-tree (that is have an fcode). Anything
* else can't be used that early and will be normally probed by
/* We only support BAR 0 for now */
iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
addr = of_translate_address(pci_dev, addrp);
+ if (addr == OF_BAD_ADDR)
+ return -1;
/* Set the IO base to the same as the translated address for MMIO,
* or to the domain local IO base for PIO (it will be fixed up later)
* we get to their "reg" property
*/
if (np != pci_dev) {
- u32 *reg = (u32 *)get_property(np, "reg", NULL);
+ const u32 *reg = get_property(np, "reg", NULL);
if (reg && (*reg < 4))
index = lindex = *reg;
}
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
- return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF);
+ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
+ UPF_BOOT_AUTOCONF, np != pci_dev);
}
#endif
void __init find_legacy_serial_ports(void)
{
struct device_node *np, *stdout = NULL;
- char *path;
+ const char *path;
int index;
DBG(" -> find_legacy_serial_port()\n");
/* Now find out if one of these is out firmware console */
- path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ path = get_property(of_chosen, "linux,stdout-path", NULL);
if (path != NULL) {
stdout = of_find_node_by_path(path);
if (stdout)
struct device_node *np,
struct plat_serial8250_port *port)
{
+ unsigned int virq;
+
DBG("fixup_port_irq(%d)\n", index);
- /* Check for interrupts in that node */
- if (np->n_intrs > 0) {
- port->irq = np->intrs[0].line;
- DBG(" port %d (%s), irq=%d\n",
- index, np->full_name, port->irq);
- return;
+ virq = irq_of_parse_and_map(np, 0);
+ if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) {
+ np = of_get_parent(np);
+ if (np == NULL)
+ return;
+ virq = irq_of_parse_and_map(np, 0);
+ of_node_put(np);
}
-
- /* Check for interrupts in the parent */
- np = of_get_parent(np);
- if (np == NULL)
+ if (virq == NO_IRQ)
return;
- if (np->n_intrs > 0) {
- port->irq = np->intrs[0].line;
- DBG(" port %d (%s), irq=%d\n",
- index, np->full_name, port->irq);
- }
- of_node_put(np);
+ port->irq = virq;
}
static void __init fixup_port_pio(int index,
fixup_port_irq(i, np, port);
if (port->iotype == UPIO_PORT)
fixup_port_pio(i, np, port);
- if (port->iotype == UPIO_MEM)
+ if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
fixup_port_mmio(i, np, port);
}
{
struct device_node *prom_stdout = NULL;
int speed = 0, offset = 0;
- char *name;
- u32 *spd;
+ const char *name;
+ const u32 *spd;
DBG(" -> check_legacy_serial_console()\n");
}
/* We are getting a weird phandle from OF ... */
/* ... So use the full path instead */
- name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ name = get_property(of_chosen, "linux,stdout-path", NULL);
if (name == NULL) {
DBG(" no linux,stdout-path !\n");
return -ENODEV;
}
DBG("stdout is %s\n", prom_stdout->full_name);
- name = (char *)get_property(prom_stdout, "name", NULL);
+ name = get_property(prom_stdout, "name", NULL);
if (!name) {
DBG(" stdout package has no name !\n");
goto not_found;
}
- spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
+ spd = get_property(prom_stdout, "current-speed", NULL);
if (spd)
speed = *spd;
git.openpandora.org / pandora-kernel.git / blobdiff