Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

[pandora-kernel.git] / arch / mips / txx9 / rbtx4938 / setup.c

diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 9ab48de..65d13df 100644 (file)
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/reboot.h>
 #include <asm/io.h>
@@ -110,6 +111,7 @@ static void __init rbtx4938_pci_setup(void)
 #define        SEEPROM2_CS     0       /* IOC */
 #define        SEEPROM3_CS     1       /* IOC */
 #define        SRTC_CS 2       /* IOC */
+#define SPI_BUSNO      0
 
 static int __init rbtx4938_ethaddr_init(void)
 {
@@ -119,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void)
        int i;
 
        /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
-       if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+       if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
                printk(KERN_ERR "seeprom: read error.\n");
                return -ENODEV;
        } else {
@@ -173,23 +175,30 @@ static void __init rbtx4938_mem_setup(void)
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-       printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
+       pr_info("PIOSEL: disabling both ATA and NAND selection\n");
        txx9_clear64(&tx4938_ccfgptr->pcfg,
                     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-       printk(KERN_INFO "PIOSEL: enabling nand selection\n");
+       pr_info("PIOSEL: enabling NAND selection\n");
        txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
        txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-       printk(KERN_INFO "PIOSEL: enabling ata selection\n");
+       pr_info("PIOSEL: enabling ATA selection\n");
        txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
        txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
+       pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+       pr_info("PIOSEL: NAND %s, ATA %s\n",
+               (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
+               (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
+#endif
+
        rbtx4938_spi_setup();
        pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);    /* updated */
        /* fixup piosel */
@@ -279,9 +288,9 @@ static int __init rbtx4938_spi_init(void)
                .mode = SPI_MODE_1 | SPI_CS_HIGH,
        };
        spi_register_board_info(&srtc_info, 1);
-       spi_eeprom_register(SEEPROM1_CS);
-       spi_eeprom_register(16 + SEEPROM2_CS);
-       spi_eeprom_register(16 + SEEPROM3_CS);
+       spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128);
+       spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128);
+       spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128);
        gpio_request(16 + SRTC_CS, "rtc-rs5c348");
        gpio_direction_output(16 + SRTC_CS, 0);
        gpio_request(SEEPROM1_CS, "seeprom1");
@@ -290,10 +299,46 @@ static int __init rbtx4938_spi_init(void)
        gpio_direction_output(16 + SEEPROM2_CS, 1);
        gpio_request(16 + SEEPROM3_CS, "seeprom3");
        gpio_direction_output(16 + SEEPROM3_CS, 1);
-       tx4938_spi_init(0);
+       tx4938_spi_init(SPI_BUSNO);
        return 0;
 }
 
+static void __init rbtx4938_mtd_init(void)
+{
+       struct physmap_flash_data pdata = {
+               .width = 4,
+       };
+
+       switch (readb(rbtx4938_bdipsw_addr) & 7) {
+       case 0:
+               /* Boot */
+               txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
+               /* System */
+               txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+               break;
+       case 1:
+               /* System */
+               txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+               /* Boot */
+               txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
+               break;
+       case 2:
+               /* Ext */
+               txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+               /* System */
+               txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+               /* Boot */
+               txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
+               break;
+       case 3:
+               /* Boot */
+               txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
+               /* System */
+               txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
+               break;
+       }
+}
+
 static void __init rbtx4938_arch_init(void)
 {
        gpiochip_add(&rbtx4938_spi_gpio_chip);
@@ -306,6 +351,11 @@ static void __init rbtx4938_device_init(void)
        rbtx4938_ethaddr_init();
        rbtx4938_ne_init();
        tx4938_wdt_init();
+       rbtx4938_mtd_init();
+       /* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */
+       tx4938_ndfmc_init(10, 35);
+       tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
+       txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {