* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/string.h>
unsigned int soc_type;
unsigned int periph_rev;
unsigned int zbbus_mhz;
+EXPORT_SYMBOL(zbbus_mhz);
static char *soc_str;
static char *pass_str;
ret = setup_bcm112x();
break;
default:
- prom_printf("Unknown SOC type %x\n", soc_type);
+ printk("Unknown SOC type %x\n", soc_type);
ret = 1;
break;
}
pass_str = "A0-A6";
war_pass = K_SYS_REVISION_BCM1250_PASS2;
} else {
- prom_printf("Unknown BCM1250 rev %x\n", soc_pass);
+ printk("Unknown BCM1250 rev %x\n", soc_pass);
ret = 1;
}
break;
periph_rev = 3;
pass_str = "A2";
break;
+ case K_SYS_REVISION_BCM112x_A3:
+ periph_rev = 3;
+ pass_str = "A3";
+ break;
+ case K_SYS_REVISION_BCM112x_A4:
+ periph_rev = 3;
+ pass_str = "A4";
+ break;
+ case K_SYS_REVISION_BCM112x_B0:
+ periph_rev = 3;
+ pass_str = "B0";
+ break;
default:
- prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+ printk("Unknown %s rev %x\n", soc_str, soc_pass);
ret = 1;
}
return ret;
soc_pass = G_SYS_REVISION(sys_rev);
if (sys_rev_decode()) {
- prom_printf("Restart after failure to identify SiByte chip\n");
+ printk("Restart after failure to identify SiByte chip\n");
machine_restart(NULL);
}
plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
- prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
+ printk("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
- prom_printf("Board type: %s\n", get_system_type());
+ printk("Board type: %s\n", get_system_type());
switch (war_pass) {
case K_SYS_REVISION_BCM1250_PASS1:
#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
- prom_printf("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
+ printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
"and the kernel doesn't have the proper "
"workarounds compiled in. @@@@\n");
bad_config = 1;
/* Pass 2 - easiest as default for now - so many numbers */
#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \
!defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
- prom_printf("@@@@ This is a BCM1250 A3-A10 board, and the "
+ printk("@@@@ This is a BCM1250 A3-A10 board, and the "
"kernel doesn't have the proper workarounds "
"compiled in. @@@@\n");
bad_config = 1;
#endif
#ifdef CONFIG_CPU_HAS_PREFETCH
- prom_printf("@@@@ Prefetches may be enabled in this kernel, "
+ printk("@@@@ Prefetches may be enabled in this kernel, "
"but are buggy on this board. @@@@\n");
bad_config = 1;
#endif
break;
case K_SYS_REVISION_BCM1250_PASS2_2:
#ifndef CONFIG_SB1_PASS_2_WORKAROUNDS
- prom_printf("@@@@ This is a BCM1250 B1/B2. board, and the "
+ printk("@@@@ This is a BCM1250 B1/B2. board, and the "
"kernel doesn't have the proper workarounds "
"compiled in. @@@@\n");
bad_config = 1;
#endif
#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \
!defined(CONFIG_CPU_HAS_PREFETCH)
- prom_printf("@@@@ This is a BCM1250 B1/B2, but the kernel is "
+ printk("@@@@ This is a BCM1250 B1/B2, but the kernel is "
"conservatively configured for an 'A' stepping. "
"@@@@\n");
#endif
break;
}
if (bad_config) {
- prom_printf("Invalid configuration for this chip.\n");
+ printk("Invalid configuration for this chip.\n");
machine_restart(NULL);
}
}