prompt "System type"
default SGI_IP22
-config LEMOTE_FULONG
- bool "Lemote Fulong mini-PC"
- select ARCH_SPARSEMEM_ENABLE
- select SYS_HAS_CPU_LOONGSON2
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select BOARD_SCACHE
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select I8259
- select ISA
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select GENERIC_HARDIRQS_NO__DO_IRQ
- select CPU_HAS_WB
- help
- Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
- an FPGA northbridge
-
config MACH_ALCHEMY
bool "Alchemy processor based machines"
select MIPS_RM9122
select SYS_HAS_CPU_RM9000
select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
help
If you have one of the following DECstation Models you definitely
want to choose R4xx0 for the CPU Type:
- DECstation 5000/50
- DECstation 5000/150
- DECstation 5000/260
- DECsystem 5900/260
+ DECstation 5000/50
+ DECstation 5000/150
+ DECstation 5000/260
+ DECsystem 5900/260
otherwise choose R3000.
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
Olivetti M700-10 workstations.
+config LEMOTE_FULONG
+ bool "Lemote Fulong mini-PC"
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_HAS_CPU_LOONGSON2
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select BOARD_SCACHE
+ select HAVE_STD_PC_SERIAL_PORT
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_EARLY_PRINTK
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select CPU_HAS_WB
+ help
+ Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
+ an FPGA northbridge
+
config MIPS_ATLAS
bool "MIPS Atlas board"
select BOOT_ELF32
board.
config MIPS_SEAD
- bool "MIPS SEAD board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "MIPS SEAD board"
select IRQ_CPU
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
This enables support for the MIPS Technologies SEAD evaluation
board.
-config WR_PPMC
- bool "Wind River PPMC board"
- select IRQ_CPU
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select PCI_GT64XXX_PCI0
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_HAS_CPU_NEVADA
- select SYS_HAS_CPU_RM7000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the Wind River MIPS32 4KC PPMC evaluation
- board, which is based on GT64120 bridge chip.
-
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
This option enables support for MIPS Technologies MIPSsim software
emulator.
-config MOMENCO_OCELOT
- bool "Momentum Ocelot board"
+config MARKEINS
+ bool "NEC EMMA2RH Mark-eins"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
- select IRQ_CPU_RM7K
- select PCI_GT64XXX_PCI0
- select RM7000_CPU_SCACHE
select SWAP_IO_SPACE
- select SYS_HAS_CPU_RM7000
select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_CPU_R5000
help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
+ This enables support for the R5432-based NEC Mark-eins
+ boards with R5500 CPU.
+
+config MACH_VR41XX
+ bool "NEC VR4100 series based machines"
+ select SYS_HAS_CPU_VR41XX
+ select GENERIC_HARDIRQS_NO__DO_IRQ
config PNX8550_JBS
bool "Philips PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
-config DDB5477
- bool "NEC DDB Vrc-5477"
- select DDB5XXX_COMMON
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select I8259
- select IRQ_CPU
- select SYS_HAS_CPU_R5432
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_KGDB
- select SYS_SUPPORTS_KGDB
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the R5432-based NEC DDB Vrc-5477,
- or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, etc.
-
-config MACH_VR41XX
- bool "NEC VR4100 series based machines"
- select SYS_HAS_CPU_VR41XX
- select GENERIC_HARDIRQS_NO__DO_IRQ
-
config PMC_MSP
bool "PMC-Sierra MSP chipsets"
depends on EXPERIMENTAL
simulate actual MIPS hardware platforms. More information on Qemu
can be found at http://www.linux-mips.org/wiki/Qemu.
-config MARKEINS
- bool "NEC EMMA2RH Mark-eins"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_HAS_CPU_R5000
- help
- This enables support for the R5432-based NEC Mark-eins
- boards with R5500 CPU.
-
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC
help
If you want this kernel to run on SGI O2 workstation, say Y here.
-config SIBYTE_BIGSUR
- bool "Sibyte BCM91480B-BigSur"
+config SIBYTE_CRHINE
+ bool "Sibyte BCM91120C-CRhine"
+ depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
- select NR_CPUS_DEFAULT_4
- select PCI_DOMAINS
- select SIBYTE_BCM1x80
+ select SIBYTE_BCM1120
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SIBYTE_SWARM
- bool "Sibyte BCM91250A-SWARM"
+config SIBYTE_CARMEL
+ bool "Sibyte BCM91120x-Carmel"
+ depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
- select NR_CPUS_DEFAULT_2
- select SIBYTE_SB1250
+ select SIBYTE_BCM1120
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SIBYTE_SENTOSA
- bool "Sibyte BCM91250E-Sentosa"
+config SIBYTE_CRHONE
+ bool "Sibyte BCM91125C-CRhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
- select NR_CPUS_DEFAULT_2
- select SIBYTE_SB1250
+ select SIBYTE_BCM1125
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_RHONE
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SIBYTE_CARMEL
- bool "Sibyte BCM91120x-Carmel"
- depends on EXPERIMENTAL
+config SIBYTE_SWARM
+ bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
- select SIBYTE_BCM1120
+ select NR_CPUS_DEFAULT_2
+ select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SIBYTE_PTSWARM
- bool "Sibyte BCM91250PT-PTSWARM"
+config SIBYTE_LITTLESUR
+ bool "Sibyte BCM91250C2-LittleSur"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SIBYTE_LITTLESUR
- bool "Sibyte BCM91250C2-LittleSur"
+config SIBYTE_SENTOSA
+ bool "Sibyte BCM91250E-Sentosa"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SIBYTE_CRHINE
- bool "Sibyte BCM91120C-CRhine"
+config SIBYTE_PTSWARM
+ bool "Sibyte BCM91250PT-PTSWARM"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
- select SIBYTE_BCM1120
+ select NR_CPUS_DEFAULT_2
+ select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SIBYTE_CRHONE
- bool "Sibyte BCM91125C-CRhone"
- depends on EXPERIMENTAL
+config SIBYTE_BIGSUR
+ bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
- select SIBYTE_BCM1125
+ select NR_CPUS_DEFAULT_4
+ select PCI_DOMAINS
+ select SIBYTE_BCM1x80
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
+ select IRQ_TXX9
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX39XX
select SYS_SUPPORTS_32BIT_KERNEL
select GENERIC_HARDIRQS_NO__DO_IRQ
config TOSHIBA_RBTX4927
- bool "Toshiba TBTX49[23]7 board"
+ bool "Toshiba RBTX49[23]7 board"
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
- select I8259
+ select IRQ_CPU
+ select IRQ_TXX9
+ select I8259 if TOSHIBA_FPCIB0
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
- select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
- select GENERIC_ISA_DMA
select HAS_TXX9_SERIAL
select HW_HAS_PCI
- select I8259
+ select IRQ_CPU
+ select IRQ_TXX9
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
This Toshiba board is based on the TX4938 processor. Say Y here to
support this machine type
+config WR_PPMC
+ bool "Wind River PPMC board"
+ select IRQ_CPU
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select PCI_GT64XXX_PCI0
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the Wind River MIPS32 4KC PPMC evaluation
+ board, which is based on GT64120 bridge chip.
+
endchoice
source "arch/mips/au1000/Kconfig"
-source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/tx4927/Kconfig"
source "arch/mips/tx4938/Kconfig"
source "arch/mips/vr41xx/Kconfig"
-source "arch/mips/philips/pnx8550/common/Kconfig"
endmenu
config SYS_HAS_EARLY_PRINTK
bool
-config GENERIC_ISA_DMA
+config HOTPLUG_CPU
bool
- select ZONE_DMA
+ default n
config I8259
bool
config NO_IOPORT
def_bool n
+config GENERIC_ISA_DMA
+ bool
+ select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
+
config GENERIC_ISA_DMA_SUPPORT_BROKEN
bool
- select ZONE_DMA
+ select GENERIC_ISA_DMA
config GENERIC_GPIO
bool
config IRQ_MSP_CIC
bool
-config DDB5XXX_COMMON
+config IRQ_TXX9
bool
- select SYS_SUPPORTS_KGDB
config MIPS_BOARDS_GEN
bool
config SERIAL_RM9000
bool
-#
-# Unfortunately not all GT64120 systems run the chip at the same clock.
-# As the user for the clock rate and try to minimize the available options.
-#
-choice
- prompt "Galileo Chip Clock"
- depends on MOMENCO_OCELOT
- default SYSCLK_100 if MOMENCO_OCELOT
-
-config SYSCLK_100
- bool "100" if MOMENCO_OCELOT
-
-endchoice
-
config ARC32
bool
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
-config MIPS_VPE_LOADER
- bool "VPE loader support."
- depends on SYS_SUPPORTS_MULTITHREADING
- select CPU_MIPSR2_IRQ_VI
- select CPU_MIPSR2_IRQ_EI
- select CPU_MIPSR2_SRS
- select MIPS_MT
- help
- Includes a loader for loading an elf relocatable object
- onto another VPE and running it.
-
endchoice
config MIPS_MT
config MIPS_MT_FPAFF
bool "Dynamic FPU affinity for FP-intensive threads"
- depends on MIPS_MT
default y
+ depends on MIPS_MT_SMP || MIPS_MT_SMTC
+
+config MIPS_VPE_LOADER
+ bool "VPE loader support."
+ depends on SYS_SUPPORTS_MULTITHREADING
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
+ select CPU_MIPSR2_SRS
+ select MIPS_MT
+ help
+ Includes a loader for loading an elf relocatable object
+ onto another VPE and running it.
config MIPS_MT_SMTC_INSTANT_REPLAY
bool "Low-latency Dispatch of Deferred SMTC IPIs"
default y
config 64BIT_PHYS_ADDR
- bool "Support for 64-bit physical address space"
- depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+ bool
config CPU_HAS_LLSC
bool
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS && BROKEN
+ depends on PROC_FS
default y
help
This kernel feature is useful for number crunching applications
git.openpandora.org / pandora-kernel.git / blobdiff